[DOGE POOL]*Stratum*Vardiff*5555 BONUS*DOGEPOOL.NET V1.6! [US][ASIA] Nodes !

[ocminer]

US Pool down i can't access with my gridseed dual miner

Got stuck .. Restarted, running again, thanks for your heads up !

[m1hlm]

Still Error

http://s29.postimg.org/8y33mk0wn/error.jpg

[ocminer]

Still Error

works flawless for me:




Did you use port 2222 ? the eu port is 4444.. sometimes this gets confused

[m1hlm]

Still Error

http://s29.postimg.org/8y33mk0wn/error.jpg

works flawless for me:

https://i.imgur.com/dU5FYau.png


Did you use port 2222 ? the eu port is 4444.. sometimes this gets confused

ok i will try later i use GridSeed not GPU

[m1hlm]

bro your pool not stable for gridseed connection because when i try to use u stratum+tcp://pool.dogepool.net:4444 or us pool or asia poll my connection sometimes error

i use us pool but it slow connection and somestimes it not connect when i try eu and asia is not connecting can you fix that?

[Jmancino2]

New block notifications continue to email me even though I have them turned off. I used the contact form but no reply. Thanks!

[ocminer]

New block notifications continue to email me even though I have them turned off. I used the contact form but no reply. Thanks!

Hi !

Can you write me a PM with your registered mail address ? I'll have a look

[BRADLEYPLOOF]

Is there any way to set my difficulty?  I hate that vardiff sends my miners from 64 to 500 to 161 to 400 to 232 to 367 and all over the place.  I just want to set it at 64 for my "higher" hashing machines and 16 for my meager machines...

[ocminer]

Is there any way to set my difficulty?  I hate that vardiff sends my miners from 64 to 500 to 161 to 400 to 232 to 367 and all over the place.  I just want to set it at 64 for my "higher" hashing machines and 16 for my meager machines...

Hi !

Currently not, i'll add some fixed diff ports in the near future. But usually vardiff should not produce such "overswings".. it should settle once a decent rate of shares per seconds has been reached.

[BRADLEYPLOOF]

Is there any way to set my difficulty?  I hate that vardiff sends my miners from 64 to 500 to 161 to 400 to 232 to 367 and all over the place.  I just want to set it at 64 for my "higher" hashing machines and 16 for my meager machines...

Hi !

Currently not, i'll add some fixed diff ports in the near future. But usually vardiff should not produce such "overswings".. it should settle once a decent rate of shares per seconds has been reached.

Nice.  Also having trouble connecting to us.dogepool.net:2222  I keep getting "Failed to resolve host" errors... Is DDOS happening and my miner is being mitigated to a firewall or some DDOS protection service?

[ocminer]

Is there any way to set my difficulty?  I hate that vardiff sends my miners from 64 to 500 to 161 to 400 to 232 to 367 and all over the place.  I just want to set it at 64 for my "higher" hashing machines and 16 for my meager machines...

Hi !

Currently not, i'll add some fixed diff ports in the near future. But usually vardiff should not produce such "overswings".. it should settle once a decent rate of shares per seconds has been reached.

Nice.  Also having trouble connecting to us.dogepool.net:2222  I keep getting "Failed to resolve host" errors... Is DDOS happening and my miner is being mitigated to a firewall or some DDOS protection service?

No everything looks good, you can also try to connect directly via ip:

stratum+tcp://107.170.244.101:2222

[BRADLEYPLOOF]

That worked.  I tried us.dogepool.net:2222, asia.dogepool.net:2222, pool.dogepool.net:4444...and finally the direct IP worked!

[ocminer]

That worked.  I tried us.dogepool.net:2222, asia.dogepool.net:2222, pool.dogepool.net:4444...and finally the direct IP worked!

Then something with your DNS seems to be wrong.. I can resolve all addresses without problems..

Well.. If it works now, its okay

[BRADLEYPLOOF]

That worked.  I tried us.dogepool.net:2222, asia.dogepool.net:2222, pool.dogepool.net:4444...and finally the direct IP worked!

Then something with your DNS seems to be wrong.. I can resolve all addresses without problems..

Well.. If it works now, its okay

Thanks again!  Much appreciated!

[ccf2000]

My current invalid is 45%!!!!!!!! Am I dragging everyone down?

[shmoogleosukami]

My current invalid is 45%!!!!!!!! Am I dragging everyone down?

I wouldn't say you're dragging everyone down rather you're just mining very inefficiently. Probably should look into why you're getting such high invalid rates. (probably due to overstressed GPU/CPU depending on what you are mining with.

[ccf2000]

I found out that all I need to do is just restart my miner. Thank you for the input.

One thing I found fishy is that on my "Dashboard" page under "Round Shares", next to "Est. Shares" the done percentage is doing something really weird.

Said when I checked in the morning was 400% done, and then in the evening it showed 200% done, in between, there is no pay out, and it used to be if the percentage was recounted, we would have got paid in between. It almost most look like something or someone is stealing our pool mining effort. And it is just happened for the last 2  - 3 weeks. Anyone notice that?

It is also the reason why I thought I might be dragging others down.

[jc01480]

Nice tutorials.  This helps me figure out what is going on.  Any recommendations on GPU card to use with an old desktop?  Curious to try this.

[m3ta]

Many pools (Doge and other coins, too) are creating port 80 listeners, for all those behind (mainly business) firewalls.

Dogepool on a port 80 connector would be an awesome feature.
 

[Aasgoroth]

so i cant seem to connect to your pool, i've tried all the nodes and made sure my info was perfect, i got it to work on a usb asic miner with exactly the same info (except different worker) and i cant find a solution, can anyone help me? i'm using guiminer scrypt btw