[ANN][SSL][0%FEE] DOGECOIN POOL MINE! FAST-POOL.COM - ON CORRECT FORK!

[viatorek]

Should worker stats be back soon ?

Looking to move my 11,000 khash over but hard to keep an eye on all my workers without that.

yes we planing to fix that in weekend...i hope we can make it

[1714681764]

1714681764

[1714681764]

1714681764

[1714681764]

1714681764

[1714681764]

1714681764

[viatorek]

Not trying to be a jerk, just trying to get everything as optimal as possible atm.

Issues:
I have about 22,000 kh/s connected with 0.5% rejection and 1.2% stales.
The dashboard randomly falls to 11,000 kh/s is it reporting accurate? before the "optimization" that took place yesterday I was having 18900~22,000 kh/s reported constant on the dash.

Also estimates place me at around 420,000 to 470,000 doge/day yet i am only getting about on average 350,000 ~360,000 doge/day, is there anything I can do to close the gap?...considering trying other pools because 50~70k missing doge (20$) a day or so is quite a loss, considering such low rejection/stales, i should only be loosing about 10,000~15,000 doge a day to in-efficiency by my estimates.... somehow somewhere im losing between 10 and 15% efficiency, i might as well try and find other pools and put 15% of my cards to mine something else lol......... because switching more computers on doesn't even appear to positively increase my hash rate on fast-pool....doesn't make any sense. I added 6 cards since yesterday and im still mining at about the same rate I was without those cards......and the difficulty dropped overnight , didn't increase.

Also how many shares/s should 22,000 kh/s give you ? on average? high and low?
On the dash the meter for shares/s jumps anywhere from 1.88 ~ 3.5 shares/s.... I have almost no reliable metrics other than my own front-end to work with, the fast-pool dash might as well be spitting out random numbers 0o cause the metrics are so volatile.

I don't think its a heat or power issue, since these cards are all in a refrigerated room essentially and everything is cooled down to 70c operating under load.... power should be fine, 1300w psu for only about 820w draw per computer at the moment.


Whats the best way to have workers setup for accurate reporting? one worker for 30 cards or 1 for each card? im using a single worker per card atm in expectation that worker stats some-day come back on and I can monitor individual card performance. (running multiple instances of cgminer per computer)


Thank you for any reply/input.
PS:
Also, the way I managed to get such low rejection / stales was by tweaking around with the expiry setting, Im sitting at around 200% discards 0.4~0.5 rejections and 1.2~1.4% stales atm , is this good or should I just dump all the settings and focus on hash-rate in cgminer, because I can get every card to report 750/450 kh/s but the old front-end would say I was hashing SLOWER even tho CGMINER said it was faster......... it seems that the front end focuses on shares/s and cgminer focuses on operating speed giving you false readings (kh/s is deceptive because high kh/s doesn't seem to always translate into high shares/s submitted).

Thanks.

i know what you mean couse i have 10mh/s rig mining here and after optimalization it shows 2-10 mhz.....it will be fixed in weekend too...i hope....its still counts shares correctly but showing you speed from last 5 seconds for about 60 seconds after the block workers/global speed....longer time was killling machine and pool speed was 0 for this 60 seconds after the block.

pool is always seeing share's...and its a luck sometimes it sends more sometimes is less...buts its always in the end...100%
and doge is random block value coin so if you want to compare pools you need to mine 1 month minimum then you can say "losing between 10 and 15% efficiency".

in the other pools your speed is 5-10min so its fake to make good stats and dont have questions like this in support thread/emails...
but try turn off all workers...your delay will be like 5-10min....why? you dont send shares but its still shows you are mining? wtf? its a waste you want to react fast when your rig is down.

if your cgminers shows 700 and you have 1% rejects...there is no option to manipulate that...you sended x shares....and belive me its counted right (add all and check in dashboard it will be send).

we planing to rewrite alll this system in weekend so dont focus on that....but yes its shows your true speed from last 5 seconds and this is how mining works....but there was many questions from people so they make it not real...maybe we gonne back to that.

p.s.

we have biggest doge miners here 460/120/100/80 mh giant gpu fatorys are mining with us...why couse we have low rejection and best efficienty right now....if not they will just go away

and one more thing we are PROPORIONAL (PPLNS SUXXXX) so we dont steal your shares like other pools,read about it before compare pools

[dwolfx]

Not trying to be a jerk, just trying to get everything as optimal as possible atm.

Issues:
I have about 22,000 kh/s connected with 0.5% rejection and 1.2% stales.
The dashboard randomly falls to 11,000 kh/s is it reporting accurate? before the "optimization" that took place yesterday I was having 18900~22,000 kh/s reported constant on the dash.

Also estimates place me at around 420,000 to 470,000 doge/day yet i am only getting about on average 350,000 ~360,000 doge/day, is there anything I can do to close the gap?...considering trying other pools because 50~70k missing doge (20$) a day or so is quite a loss, considering such low rejection/stales, i should only be loosing about 10,000~15,000 doge a day to in-efficiency by my estimates.... somehow somewhere im losing between 10 and 15% efficiency, i might as well try and find other pools and put 15% of my cards to mine something else lol......... because switching more computers on doesn't even appear to positively increase my hash rate on fast-pool....doesn't make any sense. I added 6 cards since yesterday and im still mining at about the same rate I was without those cards......and the difficulty dropped overnight , didn't increase.

Also how many shares/s should 22,000 kh/s give you ? on average? high and low?
On the dash the meter for shares/s jumps anywhere from 1.88 ~ 3.5 shares/s.... I have almost no reliable metrics other than my own front-end to work with, the fast-pool dash might as well be spitting out random numbers 0o cause the metrics are so volatile.

I don't think its a heat or power issue, since these cards are all in a refrigerated room essentially and everything is cooled down to 70c operating under load.... power should be fine, 1300w psu for only about 820w draw per computer at the moment.


Whats the best way to have workers setup for accurate reporting? one worker for 30 cards or 1 for each card? im using a single worker per card atm in expectation that worker stats some-day come back on and I can monitor individual card performance. (running multiple instances of cgminer per computer)


Thank you for any reply/input.
PS:
Also, the way I managed to get such low rejection / stales was by tweaking around with the expiry setting, Im sitting at around 200% discards 0.4~0.5 rejections and 1.2~1.4% stales atm , is this good or should I just dump all the settings and focus on hash-rate in cgminer, because I can get every card to report 750/450 kh/s but the old front-end would say I was hashing SLOWER even tho CGMINER said it was faster......... it seems that the front end focuses on shares/s and cgminer focuses on operating speed giving you false readings (kh/s is deceptive because high kh/s doesn't seem to always translate into high shares/s submitted).

Thanks.

i know what you mean couse i have 10mh/s rig mining here and after optimalization it shows 2-10 mhz.....it will be fixed in weekend too...i hope....its still counts shares correctly but showing you speed from last 5 seconds for about 60 seconds after the block workers/global speed....longer time was killling machine and pool speed was 0 for this 60 seconds after the block.

pool is always seeing share's...and its a luck sometimes it sends more sometimes is less...buts its always in the end...100%
and doge is random block value coin so if you want to compare pools you need to mine 1 month minimum then you can say "losing between 10 and 15% efficiency".

in the other pools your speed is 5-10min so its fake to make good stats and dont have questions like this in support thread/emails...
but try turn off all workers...your delay will be like 5-10min....why? you dont send shares but its still shows you are mining? wtf? its a waste you want to react fast when your rig is down.

if your cgminers shows 700 and you have 1% rejects...there is no option to manipulate that...you sended x shares....and belive me its counted right (add all and check in dashboard it will be send).

we planing to rewrite alll this system in weekend so dont focus on that....but yes its shows your true speed from last 5 seconds and this is how mining works....but there was many questions from people so they make it not real...maybe we gonne back to that.

p.s.

we have biggest doge miners here 460/120/100/80 mh giant gpu fatorys are mining with us...why couse we have low rejection and best efficienty right now....if not they will just go away

and one more thing we are PROPORIONAL (PPLNS SUXXXX) so we dont steal your shares like other pools,read about it before compare pools

You are right I really didn't take into account long-term variance.
How many shares/s do you get with 10mh/s?

[viatorek]

You are right I really didn't take into account long-term variance.
How many shares/s do you get with 10mh/s?

dunno i work on email support here  - replaying billions locked/pins reset/issue emails
dont have time count shares Smiley but some day...i will hehe 

[viatorek]

STRATUM 3333 WILL BE UPDATED TODAY

[dwolfx]

You are right I really didn't take into account long-term variance.
How many shares/s do you get with 10mh/s?

dunno i work on email support here  - replaying billions locked/pins reset/issue emails
dont have time count shares Smiley but some day...i will hehe 

https://www.youtube.com/watch?v=ZIniljT5lJI

We must count!!! 1 shares 2 SHARES 3 SHARES 3!!!

[anususer]

STRATUM OPTIMALIZATION IN PROGRESS...HOOOOOLD

STRATUM OPTIMIZATION IN PROGRESS...HOOOOOLD

Just plz fix it, because it hurts ^_^ Grammar nazi

[robshot]

STRATUM OPTIMALIZATION IN PROGRESS...HOOOOOLD

STRATUM OPTIMIZATION IN PROGRESS...HOOOOOLD

Just plz fix it, because it hurts ^_^ Grammar nazi

are you sure it is written like that.
english is not my best language but it sounds not good.

[viatorek]

try to sleep 2h a day and then write something

but i got job for you i wroted

http://fastpoolfaq.wordpress.com

at 5-6am so this will need big fix! you can send some fix to fastpool247@gmail.com


and......thank you grammar nazi

[pindis]

try to sleep 2h a day and then write something

but i got job for you i wroted

http://fastpoolfaq.wordpress.com

at 5-6am so this will need big fix! you can send some fix to fastpool247@gmail.com


and......thank you grammar nazi

im getting "stratum from pool 0 detected new block" almost all the time now.. and my hashrate on the site shows 500 with my 1400 mh rig. Is something wrong?

[amidamariu]

Please unlock me : amidamariu
Mail : joh***.**cod@gmail.com
Thank

[Shimple]

Locked my acct cause I forgot my pass. Tried too many times and support or reset password function is not working for me for some reason?

Is it possible for you to manually send me a pass reset link to my accounts e-mail?

Username was Shimple.

Please and thanks

[Freyja]

Account locked. Can you unlock / send reset it for me please. User: nippran

[Entso11]

Doge becoming harder, halving comes soon, much profit but less coins
Im now at 20k a day with a 1.4mh/s. Is this normal? Do we have bad days lately?
Shall i jump to the new stratum?

[viatorek]

with this diff 1.4mh make 24k dogecoin a day

so its ok

source:
http://www.coinwarz.com/cryptocurrency/

[Kifissia]

I am mining 24/7 on a PPLNS pool (~2.5MH/s).

Why do you say Prop pool is better? Is it really better? Because if it is, I'll switch to yours!

[babarali124]

i have been mining for a few hours now at 940+khash and my dashboard shows me 210khash. As the coins also are generating very slow , it looks like its really running at 210khash. Can you please check what is wrong? I also tried your loto coin pool and that was far much better than dogecoin pool, the stats were also better. waiting for your response.

[robshot]

I am mining 24/7 on a PPLNS pool (~2.5MH/s).

Why do you say Prop pool is better? Is it really better? Because if it is, I'll switch to yours!

yes prop is better, try it for a week of 2 and you will see it.

i have been mining for a few hours now at 940+khash and my dashboard shows me 210khash. As the coins also are generating very slow , it looks like its really running at 210khash. Can you please check what is wrong? I also tried your loto coin pool and that was far much better than dogecoin pool, the stats were also better. waiting for your response.

yeah the stats doing strange the last time. they are gonna fix it this weekend.
and about your 210kH/s I can't check that but normal if you are sure the miners are mining at 940+kH/s they will mine at that speed.

[Entso11]

I am mining 24/7 on a PPLNS pool (~2.5MH/s).

Why do you say Prop pool is better? Is it really better? Because if it is, I'll switch to yours!

Hello my fellow Greek mate. The pool is great, stable and reliable auto payments. Join us. What GPU's are you using?

[viatorek]

I am mining 24/7 on a PPLNS pool (~2.5MH/s).

Why do you say Prop pool is better? Is it really better? Because if it is, I'll switch to yours!

PPLNS - “Pay Per Last N Shares"  you mine on pool thats pay you for how many last N shares? i bet you dont know

you lose...pool win...



its better to get pay for ALL shares you submitted or just last N?

proportional = you win pool win situation we just pay for all...

our pool also add txfee in block to payout

remeber that when you consider donation  



p.s. PPLNS was designed to prevent pool hoopers....but if you are smart you can easy...hoop PPLNS and make 30-50% more...but i will dont tell you how to not kill PPLNS dogecoins pools (most dogecoins pools is PPLNS,couse its needs less resources (its keep in base only last N shares not all)

...and i love dogecoin dont want it to die