allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 25, 2013, 07:18:53 AM |
|
Got mine today, but sadly one of the blades is broken - two capacitors were broken off the board. Also the metal frame was badly warped and bent. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
DrJimmy
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 25, 2013, 11:41:54 AM |
|
Got mine today, but sadly one of the blades is broken - two capacitors were broken off the board. Also the metal frame was badly warped and bent. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I have the same problem. Two broken off capacitors and bent frame.
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 25, 2013, 03:23:04 PM |
|
Got mine today, but sadly one of the blades is broken - two capacitors were broken off the board. Also the metal frame was badly warped and bent. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I have the same problem. Two broken off capacitors and bent frame. Umm, are the two broken capacitors at the end of the main board (the one that holds the control board with ethernet jack) ? It would be odd if we both have the exact same damage.
|
|
|
|
smooth
Legendary
Offline
Activity: 2968
Merit: 1198
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 25, 2013, 08:59:02 PM |
|
It would be odd if we both have the exact same damage.
I had bent frame on one of mine, but no damage to the board. I think the packing material is not adequate to protect these devices during shipping.
|
|
|
|
BadAss.Sx
Legendary
Offline
Activity: 1526
Merit: 1002
Bulletproof VPS/VPN/Email @ BadAss.Sx
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 25, 2013, 10:13:49 PM |
|
Anyone knows how to monitor the ants with an external program?
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2013, 05:49:49 AM |
|
|
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2013, 08:23:18 AM |
|
mine was supposed to be shipped on 21 dec. but still no movement. I called UPS but they said they received bill and shipment info but not the package itself . You're lucky the your antminer left china and on its way ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) sushi is looking into this but i fear i won't be able to get it before new year. Damn, my tracking shows that it was late and my delivery was just changed from today to Thursday.
It took a long time to leave China:
Shenzhen, China 12/23/2013 7:51 P.M. Departure Scan 12/23/2013 3:46 P.M. Export Scan Shenzhen, China 12/21/2013 11:30 P.M. Arrival Scan 12/21/2013 10:55 P.M. Departure Scan 12/21/2013 7:33 P.M. Origin Scan China 12/21/2013 3:32 A.M. Order Processed: Ready for UPS
|
|
|
|
AbiTxGroup
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2013, 11:51:34 AM |
|
mine was supposed to be shipped on 21 dec. but still no movement. I called UPS but they said they received bill and shipment info but not the package itself . You're lucky the your antminer left china and on its way ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) sushi is looking into this but i fear i won't be able to get it before new year. Hope they figure out where yours is and get it to you soon. Mine did show up Thursday afternoon. It made it into town on Tuesday, but it was 10am and the local UPS distro was closed to walk-in customers, so I had to wait. Its up and running now.
|
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 03:39:18 PM |
|
It turned out that they got a second tracking number for the package. other one is invalid somehow. package is in customs now. waiting for final release after i paid the tax for it. But I got the first one delivered today. I tried to set it up. I crossed green and black cables with cord i cut out of an extra power cable . Power supply runs for few minutes then stops. I can't turn it back up for a couple of minutes. After the wait i can turn it up again only after a few minutes again. it shuts down ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
fhh
Legendary
Offline
Activity: 1206
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 03:51:08 PM |
|
Powersuply is to weak, take a more powerful
|
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 04:02:26 PM |
|
one i'm trying to connect is a 600w xilence psu. In the setup thread it's written to buy 450 w psu. I think the make-shift jumper wire out of a power cable maybe the issue or xilence psu takes more than to just cross green and black cable i dont know.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 05:07:39 PM |
|
one i'm trying to connect is a 600w xilence psu. In the setup thread it's written to buy 450 w psu. I think the make-shift jumper wire out of a power cable maybe the issue or xilence psu takes more than to just cross green and black cable i dont know.
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.ixbt.com%2Fpower%2Fpsu%2Fphotos%2Fxilence%2Fxp600-ge%2F1000%2Fpsu_005.jpg&t=665&c=Jle5LdZmomaW3A) If either of the above are your PSU, please note there are TWO 12V rails. Usually this means 1 rail supports the ATX mobo connectors and Molex wiring, while the other is dedicated to the PCI-e connectors. If you run both sides of your miner using only PCI-e cables on the one rail, you will be using more power than the allowable amperage (at stock speeds, ~360W or 30A). Even if split up properly, you should make sure each rail is capable of a minumum 18A to allow a little bit of headroom. It sounds like you are running them on only 1 rail so the system starts fine at low power draw, but once it connects to the stratum server and begins to pull the full amperage required for hashing, your PSU rail is overloaded and it shuts down. use the 2x4pin ATX connectors for 1 blade and a pci-e cable for the other and you should be fine
|
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 05:19:11 PM |
|
mine is 80 plus bronze. I'll try your suggestion thanks. though i was not able to setup miner so it was not hashing .
|
|
|
|
novymivo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 05:39:00 PM |
|
I will repeat to all Please invest in dell 750 w server psu for 10-15 £, do small modification, and run smooth, as I am doing even with OC ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . any question please pm me.
|
1DP6hkRCNoxE15QFfyeqxRk1qu7gX4FzGS
|
|
|
fhh
Legendary
Offline
Activity: 1206
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 05:47:01 PM |
|
What modification has to be done?
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 05:48:40 PM |
|
I will repeat to all Please invest in dell 750 w server psu for 10-15 £, do small modification, and run smooth, as I am doing even with OC ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . any question please pm me. how do you modify them for easy/safe use? I actually won a pair of 630W ones on a local ebay auction the other day but have not picked them up yet.
|
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 06:53:06 PM |
|
I managed to open miner configuration before it shuts down. All three worker info was present so it was trying to hash and trying get more power i guess. I managed to erase all three worker info so miner continued to work without shutting down. But when i entered one of my own pool worker info it shut down again. I used both pci-e cable on both sides of the miner. I tried your suggestion , connecting one side of miner with pci-e (tried both of them) and connecting the other side with 2X4 pin ATX connectors but i never got it run. so i'm out of ideas other than dismantling the 1000w psu from own desktop computer give it shot. But i'm at a loss because in the setup page it says 450w psu recommended. How in the hell people got it to working with 450w psu ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) one i'm trying to connect is a 600w xilence psu. In the setup thread it's written to buy 450 w psu. I think the make-shift jumper wire out of a power cable maybe the issue or xilence psu takes more than to just cross green and black cable i dont know.
http://www.technic3d.com/article/pics/330/ge_892.jpg http://www.ixbt.com/power/psu/photos/xilence/xp600-ge/1000/psu_005.jpgIf either of the above are your PSU, please note there are TWO 12V rails. Usually this means 1 rail supports the ATX mobo connectors and Molex wiring, while the other is dedicated to the PCI-e connectors. If you run both sides of your miner using only PCI-e cables on the one rail, you will be using more power than the allowable amperage (at stock speeds, ~360W or 30A). Even if split up properly, you should make sure each rail is capable of a minumum 18A to allow a little bit of headroom. It sounds like you are running them on only 1 rail so the system starts fine at low power draw, but once it connects to the stratum server and begins to pull the full amperage required for hashing, your PSU rail is overloaded and it shuts down. use the 2x4pin ATX connectors for 1 blade and a pci-e cable for the other and you should be fine.
|
|
|
|
Guava
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 70
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 06:56:56 PM |
|
|
1J1VmJKZbeEvNCxTtpcouini15RDkMchRP
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 07:15:21 PM |
|
i'll try it thanks.
|
|
|
|
arphon
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2013, 08:54:14 PM |
|
well i gave up on the 600w xilence 80plus bronze and dismantle my desktop computer and take the 1000w cooler master silent pro gold and hooked it up with ant miner. now my first antminer hashing away while killing my ears ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) second is on the waiting on the customs third one will be shipped after January fourth hell yeah it's grinning time. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
|