Hi guys,
I received my Cube an hour ago. Had my power supply ready to boot it up. When I boot it up, a few seconds later, it produce a "click" sound then turn itself off along with the power supply. Tried it couple times but no luck. I am using a Corsair CX430M power supply. It only has 1 PCI-E connector, so I use another 2x molex to PCI-E connector. I also try with another 2x molex and 1x molex but still... To me it seems like the power supply problem. Any advice would gladly appreciated.
Here is the link to the power supply at Newegg:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139049&Tpk=cx430mThe startup load is triggering your overload protection circuit on your Power supply. Its not really overloaded , probably just a spike as the ASIC's are powered up. If your cube has been sitting in the cold, make sure they warm up to room temperature and try powering on a few times, you might get lucky.
I had the same issue and had to get a larger power supply. After I had gotten a new power supply, I also seen a workaround to install a capacitor at the molex plug. Search Dogies cube setup thread for more information on that.
Cheers