U1 antminer USB sticks 0.08 unit (500/500 sold) COMPLETE

[elasticband]

Received my 2 ants yesterday evening.
I had no problem with tracking, for some reason I have found http://www.trackitonline.ru/ to work quite well for general tracking.
Sadly I didn't have time to recompile cgminer in ubuntu, so only around 800MH/s at the moment.
Today I shall do it.

Thank you for the tip, the tracking info is at least a little more detailed

Anyone still waiting i suggest tracking using the above mentioned site. http://www.trackitonline.ru/

[tmu]

I needed to reinstall ubuntu again and rebuild cgminer with instructions from https://bitcointalk.org/index.php?topic=390929.0
OC with freq = 0981 and I have steady ~2GH/s 

[Brewins]

recieved on monday! Thanks make, gunna give you +rep

[Buchi-88]

Good evening,

I hope you can help me guys

I mining on a raspberry Pi with self complimented CGMiner 3.9.0

I hope the follow settings are OK to run my new 9 miners @ 2 GH/S next week?

First install:

git clone https://github.com/bitmaintech/cgminer.git
cd /usr/src/cgminer-3.9.0
./autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure --enable-bmsc
make

start:

screen -S mine

cd /usr/src/cgminer-3.9.0

cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0981

Thanks for your help.

greets

Always when I will start the miners:

cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0881

root@sunwatch:/usr/src/cgminer-3.9.0# cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0881
 [2014-01-10 20:07:11] cgminer: --bmsc-options: unrecognized option 

What is the wrong command thanks for help and @elasticband thanks for the good and 1A transaction!

greets

[1am3r]

You have the wrong cgminer version. Currently it's only supported in the modified one from bitmain. You can get it here: https://github.com/bitmaintech/cgminer/ as source code, or here https://github.com/AntMiner/AntGen1/tree/master/cgminer as binary directly from bitmain.

[rupy]

The tracking code you sent me does not work and I have not received the USB miner!

Please PM a working tracking number.

[elasticband]

The tracking code you sent me does not work and I have not received the USB miner!

Please PM a working tracking number.

Hello sir,

Sorry to hear it has not arrived yet. When i gave you the correct tracking number the second time i checked it and it worked and appeared in the system. Now when i check it, it does not.

All i can say is wait until mid next week and i guess i will refund you if it does not arrive as it is only one unit.

again sorry for the delay, but i am not the mail handler. Your order was placed in a bubble envelope with a printed label, i don't really know what i could have done differently.

peace

[phoenixsilverbird]

The tracking code you sent me does not work and I have not received the USB miner!

Please PM a working tracking number.

Hello sir,

Sorry to hear it has not arrived yet. When i gave you the correct tracking number the second time i checked it and it worked and appeared in the system. Now when i check it, it does not.

All i can say is wait until mid next week and i guess i will refund you if it does not arrive as it is only one unit.

again sorry for the delay, but i am not the mail handler. Your order was placed in a bubble envelope with a printed label, i don't really know what i could have done differently.

peace

I can second this. My order arrived in a bubble envelope. However, my tracking information was bad and often inaccessible. Elasticband is very legit and could have easily scammed me on my first order if he had wanted too. If he wanted to make money scamming, he'd have done it with a bigger order!

I hope all your orders arrive!

[3ds]

My order arrived yet (to germany) 

 Tracking at http://www.trackitonline.ru sayes first "Unsuccessful delivery attempt. Insufficient or incorrect address" and it's "Parcel delivered to addressee with digital proof of acceptance"

[elasticband]

My order arrived yet (to germany) 

 Tracking at http://www.trackitonline.ru sayes first "Unsuccessful delivery attempt. Insufficient or incorrect address" and it's "Parcel delivered to addressee with digital proof of acceptance"

Your ordder finally arrived?

any visible problems with the label that they sent it wrong place?

[3ds]

Your ordder finally arrived?

Yes.

any visible problems with the label that they sent it wrong place?

No. All fine. Think the mailman was drunken. Don't know...

[rupy]

This is why I might need tracking info, the delivery might bounce othervise!

[elasticband]

Your ordder finally arrived?

Yes.

any visible problems with the label that they sent it wrong place?

No. All fine. Think the mailman was drunken. Don't know...

it's really strange.

One order portugal, similar to yours but arrived quick, mail had wrong address.

sweeden - single unit, not arrved yet.

Netherlands one box arrived with an extra three tracking numbers attached and it was about 5 days over due.


Denmark order returnred to sender due to incomplete address

all i can say is this is the worst the mail service have ever done for me.....

pretty sure the rest have arrived.

[elasticband]

This is why I might need tracking info, the delivery might bounce othervise!

I have given you tracking info.

As mentioned a couple of post previous, i checked your tracking the second time i gave you the correct number. It worked and was registered in the system.

Now i check it nothing happens

All i can ask is you wait until mid week and i will have to process you a refund, sorry for the delay but i am not the mail handler.

maybe if i was all units would make it safe...

[rupy]

Maybe the parcel has gotten a new DPD code, can you ask your post company? Strange that delivery has taken so long and is untrackable!

[ewibit]

Hi elasticband

please send me the tracking number
because I am working full day and have to redirect it to accept it...

thx
edit:
it arrived

[rupy]

Unfortunately I think its time for a refund. It's been 2 weeks without any sign of any letter, parcel or working tracking info.

Received the miner and it works, all good!

[mikejones]

How do I overclock my U1 ANtminer with minepeon. My "rig" includes one block erupter, two red furies, one jalapeno.

[phoenixsilverbird]

How do I overclock my U1 ANtminer with minepeon. My "rig" includes one block erupter, two red furies, one jalapeno.

I don't recommend Minepeon for antminer u1.
Not only is minepeon a small distro (meaning you can't do anything but mine on the rPi), there is no command line interface.

To overclock, you need to change the --bmsc-options in cgminer.
I suggest you load up raspbian onto an sd card, set it up, install cgminer and then you can overclock, and also do other things on the rpi (programs, games, internet)

The beauty is, the CPU usage of cgminer in raspbian is minimal, so in essence, your rpi is completely free to do other things on top of mining

[Antek]

Hi there,

will the be more antminers available?

Kind regards
Andreas