[IN STOCK] PCIe risers - All Types USB / Ribbon - $5 and up - Ships same day!

[Damnsammit]

1x to 16x molex Powered USB style PCI-e Risers
60cm cable length




Qty available:  70

Prices:
QTY 1-3:  $13 USD each
QTY 4-9: $12 USD each
QTY 10+: $10 USD each



1x to 16x molex Powered PCI-e Risers
19cm cable length



Qty available:  115

Prices:
QTY 1-3:  $10 USD each
QTY 4-9: $9 USD each
QTY 10+: $8 USD each



1x to 1x molex unpowered PCI-e Risers
19cm cable length



Qty available:  100

Prices:
QTY 1-3:  $5 USD each
QTY 4-9: $4 USD each
QTY 10+: $3 USD each


Shipping:
$5 to USA flat-rate. PM me for international orders.

If you want me to ship it internationally, you will pay the expense.

I accept Bitcoin and Paypal... will also entertain any alt-coin offers.  

[takagari]

If you only had powered Won't even risk unpowered.

[Damnsammit]

If you only had powered Won't even risk unpowered.

Yeah... these were supposed to be powered.

Moved to a new supplier and should be getting 100 powered ones with a 25cm cable length early next month.  

[Damnsammit]

Bump.  You know you need some risers!

I will have 1x to 1x and powered 1x to 16x in stock in a few weeks!

[biohack]

How much for the powered 1x to 16x?

[DigitalPackrat]

Looking for 10, PM sent.

[Damnsammit]

The powered ones will likely be $20 shipped depending on how the market is when they arrive.  I don't want to price gouge on the forums but if they are still selling at $40 on eBay when I receive them then I probably won't go lower than $20.

The 1x to 1x unpowered risers will be considerably cheaper, likely under $10, because the cost is a fraction of the cost of the power risers.

Still have 10 of these unpowered available.  Will be receiving 300 1x to 1x unpowered and 100 1x to 16x powered in the next couple of weeks.

[Damnsammit]

Looking for 10, PM sent.

Payment received.  Shipping today!

[sharedminers]

I need 2, do you ship to canada?

[Damnsammit]

I need 2, do you ship to canada?

Sure, two shipped to Canada will be $35. 

I'll PM you payment info.

[Bobsurplus]

Anyone using these are crazy, you need to have powered risers to mine otherwise... well.. keep a phone handy to call the local fire department.

[Damnsammit]

Anyone using these are crazy, you need to have powered risers to mine otherwise... well.. keep a phone handy to call the local fire department.

I have never heard one person post on here about their mining rig catching on fire...

Also, no matter what you rig build is, you can always use a couple of unpowered risers.  Powered risers are needed for 4+ GPUs, but you can still use unpowered risers for a couple of slots.

[Bobsurplus]

Anyone using these are crazy, you need to have powered risers to mine otherwise... well.. keep a phone handy to call the local fire department.

I have never heard one person post on here about their mining rig catching on fire...

Also, no matter what you rig build is, you can always use a couple of unpowered risers.  Powered risers are needed for 4+ GPUs, but you can still use unpowered risers for a couple of slots.

Hey and I'm sure you can use a drill bit to clean your ears but I would not recommend it.

[Damnsammit]

Hey and I'm sure you can use a drill bit to clean your ears but I would not recommend it.

Yeah because that is totally the same thing... 

If you don't know what you are talking about, you really shouldn't be giving advice to people.

[Bobsurplus]

Hey and I'm sure you can use a drill bit to clean your ears but I would not recommend it.

Yeah because that is totally the same thing... 

If you don't know what you are talking about, you really shouldn't be giving advice to people.

I do know what I'm talking about. I have over 14000 KH mining altcoins. I have been building LTC miners for over a year. I'm not the only one out here who has voiced their opinion on unpowered risers.. just do a search!

[nachius]

Hey and I'm sure you can use a drill bit to clean your ears but I would not recommend it.

Yeah because that is totally the same thing... 

If you don't know what you are talking about, you really shouldn't be giving advice to people.

I do know what I'm talking about. I have over 14000 KH mining altcoins. I have been building LTC miners for over a year. I'm not the only one out here who has voiced their opinion on unpowered risers.. just do a search!

even if YOU don't recommend it why come in and thread crap?  People have problems with both powered and unpowered risers usually a PSU issue, but many also have success with both.  It IS possible to use them for extended periods without problems everything has its limitations.  If you had a choice yes maybe you go with powered, but for a card or 2 with a sufficient PSU pulling 75 watts through the mobo and an unpowered riser shouldn't be an issue.

[Damnsammit]

Hey and I'm sure you can use a drill bit to clean your ears but I would not recommend it.

Yeah because that is totally the same thing... 

If you don't know what you are talking about, you really shouldn't be giving advice to people.

I do know what I'm talking about. blah blah blah *measures dick* blah blah blah!

No, you don't, or you would know that unpowered risers are completely fine for almost all 2-3 GPU builds.  Not everyone is running 4+ GPU builds.  Some people have old mobos sitting around with a couple of PCIe slots that these will run completely safe on.

You don't have to recommend it, but you shouldn't shit on something if you don't know what you are talking about.

[Damnsammit]

4 left...

Expecting more stock in the next two weeks.

[DigitalPackrat]

Unpowered risers are fine under the right circumstances. I am running about 18mh in altcoins all on unpowered risers, 5 cards per mb. Some mainboards have extra power connectors and some video cards don't draw that much via pci. In my case, the cards don't draw that much where I am worried about it. If they did then I would cut the appropriate wires and connect it to the custom harnesses I built for the server power supplies I am using.

[Damnsammit]

My wife informed me that the powered risers just came in today.  Will be updating this post with pictures and info when I get home from work.

PM me if you want to buy in bulk.  Have 100 in stock.

Prices include shipping to USA (from Dallas, TX) :
Qty 1 = $20
Qty 2-9 = $15/ea
Qty 10+ = PM me.

All prices lowered on 4-Jan-14

[Damnsammit]

Updated with pictures.

[Damnsammit]

Shipping 8 to Canada today... still got lots left.

Let's make a deal

[sknobs]

Do these have the capacitor? Any thoughts on that being good or bad?
Thanks.

[Damnsammit]

Do these have the capacitor? Any thoughts on that being good or bad?
Thanks.

When I think of a capacitor I am thinking of something like this:



These have the molex power on them.  My understanding is it takes two of the wires and powers it through the molex.  Without the molex power, it uses power through the motherboard.  This can be bad if you are using multiple risers per motherboard.  From all of the posts that I have seen about it, no one has really had any problems with unpowered risers unless they are using 3 or more.  That being said, the powered ones do not need the power to be plugged in for them to work, so they can serve as unpowered risers as well.
EDIT:  This is incorrect.  After testing these out they MUST be connected to the Molex or they will not work. [/b]

I see no advantage to using nonpowered risers except to daisy chain for lengthier case builds.  I also have 6pin PCIe extender cables for those using beasty PSUs to power a lot of cards where the cables could not reach.  I have no idea how useful they would be, but I bought them anyways because they seemed like a good idea.  lol

[Damnsammit]

Bump bump.  Get your risers here cheaper than anywhere else on the forums and if you find a better deal, then I will beat them

Sure, you can go to some fancy website and pay $20 each, fill out some forms, feel good about it and get them in a week or so, or you can just post here or shoot me a PM and I will ship it out to you within 24 hours.

[Damnsammit]

Best deals on the interweb.   YOLO

[Damnsammit]

Come one, come all.  Get your risers here!  Hot steamy risers lifting all your worries away... 

I want a hot dog now.

[mcscotty89]

All 8 risers have arrived, safe and sound. Thanks Damnsammit! 

[Damnsammit]

All 8 risers have arrived, safe and sound. Thanks Damnsammit! 

You are very welcome! 

I should be receiving 1x to 1x risers today.  Will post additional info when I receive them.

 

[Damnsammit]

I should be receiving 1x to 1x risers today.  Will post additional info when I receive them.

Apparently not... DHL just teased me I guess

[ymer]

You have PM

[Damnsammit]

You have PM

You have a response.  I can get them out tomorrow as long as you pay within the next 18 hours or so

[ymer]

You have PM

You have a response.  I can get them out tomorrow as long as you pay within the next 18 hours or so

Payment sent 

[Damnsammit]

You have PM

You have a response.  I can get them out tomorrow as long as you pay within the next 18 hours or so

Payment sent 

Tracking info PM'd. 

Only about 15 left!   Will be placing another order in the next week.

[Korxax]

I'll take 5.

I'll pm you in a sec.

Korxax


1NtV1q29FtRAYAkMJHMYbASZLiLur2FQe

[Damnsammit]

Alrighty.

Seven left!

Note:  I forgot about Chinese New Year, so it will likely be Late Feb until I have more.

[Korxax]

The 5 I ordered just showed up!  Thanks a lot!  Nice quick shipping!


Korxax

1NtV1q29FtRAYAkMJHMYbASZLiLur2FQe

[JBrace1990]

The powered 1x to 16x work exactly the same for mining as 16x to 16x, right?

If so, I'll take 6.

[Damnsammit]

The powered 1x to 16x work exactly the same for mining as 16x to 16x, right?

If so, I'll take 6.

That's correct.

And you are in luck!  I have exactly 6 left

PM sent.

[JBrace1990]

Payment and address sent =)

[Damnsammit]

Payment and address sent =)

Received. It will go out tomorrow. I'll PM you the tracking number in the morning

[Damnsammit]

Received 120 more today.  Back in stock! 

[buckrogers]

I can vouch for this guy, I bought a bunch of him a few weeks ago and they are working great in my rig. here is a photo, not sure if you can see the cables though:


https://i.imgur.com/pNpb7YP.jpg

Thanks again for the speedy delivery!

[Damnsammit]

I can vouch for this guy, I bought a bunch of him a few weeks ago and they are working great in my rig. here is a photo, not sure if you can see the cables though:


https://i.imgur.com/pNpb7YP.jpg

Thanks again for the speedy delivery!

You are very welcome!  That is a damn fine rig you got there, man!

[Damnsammit]

Just wanted to point this edit out.  I was told by a friend that these worked just fine without being powered but that is NOT the case.  I have tested it myself and they will only work when the molex is plugged in.  Also,  I should have unpowered x1 to x1 risers coming in next week as well as the USB styled risers.   Website launching March 1st!

That being said, the powered ones do not need the power to be plugged in for them to work, so they can serve as unpowered risers as well.

EDIT:  This is incorrect.  After testing these out they MUST be connected to the Molex or they will not work.

[Damnsammit]

Should be receiving USB style risers and 1x to 1x risers this week.

Will update this thread with that information.

Website might be delayed from March 1st, but hopefully not!

[Damnsammit]

I will have USB style risers in stock tomorrow as well as x1 to x1 risers.

Incoming price slash on these risers?  Maaaaayyyybeeeee....

[Damnsammit]

Prices slashed.

OP updated.

Get your risers here!

[Damnsammit]

Bump.  Get your risers here!

[Damnsammit]

Bumpity bump bump

[Damnsammit]

Riser bumps.

[Damnsammit]

You know you want to build a new rig...

[Damnsammit]

Weekly bump.

[Damnsammit]

Prices slashed!

[Damnsammit]

Lowest prices on the forums... hit me up. 

[Damnsammit]

Sunday bumpday.

[Damnsammit]

bump

[Damnsammit]

Prices slashed! 

[Damnsammit]

bump

[Damnsammit]

bUMP

[zolace]

ill buy from u pm me please

[Damnsammit]

Anyone still mining? 

[jjj0923]

where do you ship from...

I'm tired of ordering from amazon only to find out they're being shippped from china and I have to wait two weeks for delivery!!!

[Damnsammit]

where do you ship from...

I'm tired of ordering from amazon only to find out they're being shippped from china and I have to wait two weeks for delivery!!!

Dallas, TX

You should get them within 2-3 days in the USA.

[jjj0923]

where do you ship from...

I'm tired of ordering from amazon only to find out they're being shippped from china and I have to wait two weeks for delivery!!!

Dallas, TX

You should get them within 2-3 days in the USA.

Dallas - good - I like that area...My brother lived in Irving - Cabaret Royale was my favorite ever Gentlemen's Club - OH YEA!!!

http://cabaretroyaledallas.com/

[Damnsammit]

where do you ship from...

I'm tired of ordering from amazon only to find out they're being shippped from china and I have to wait two weeks for delivery!!!

Dallas, TX

You should get them within 2-3 days in the USA.

Dallas - good - I like that area...My brother lived in Irving - Cabaret Royale was my favorite ever Gentlemen's Club - OH YEA!!!

http://cabaretroyaledallas.com/

hahahaha, don't think I have ever been to that one.

My favorite is The Clubhouse

(http://theclubhousetexas.com/)

[jjj0923]

BOOYAH!!!

[Damnsammit]

Let's make a deal!