[ANN] QQCoin- Scrypt Jane, ASIC Resistant, N-Factor, Multipool Resistant

[Bradlu]

Based on my hash rate when I use CGMiner of950 kh/s and the current difficulty of 0.584 I should be  hhitting a block every 45 to an hour. I hit one block for 370 in the last 6 hours. Are my calculations wrong since this isn't CGminer?

Based on my hash rate when I use CGMiner of950 kh/s and the current difficulty of 0.584 I should be  hhitting a block every 45 to an hour. I hit one block for 370 in the last 6 hours. Are my calculations wrong since this isn't CGminer?

Right when I hit send I mined a block. Only 40 though. But, a block nonetheless. However, I'm still puzzled why I'm not hitting blocks more often. If this was any other alt coin with a difficulty of 0.58 I would be hitting many more blocks

[1715227260]

1715227260

[1715227260]

1715227260

[1715227260]

1715227260

[blehrange]

Is this coin gonna go anywhere? I have mined over 1000 in a few hours.

[Tofer]

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

[LitecoinRates]

run the wallet with the -server from a command line or batch file, not within the software GUI

[Bram]

So much rejection. Not very Quick.

[johnngbluntzky]

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

i thought so as well.. but wasn't hitting anything. closed my wallet, made a start.bat script in the qqminer folder with "qqcoin-qt.exe -server", restarted my wallet with this .bat file, restarted solo-mining.bat, and have accrued 552 qqc accepted in the last 30-45 minutes now. maybe it was luck, maybe it was the start.bat... dunno. worth a try though i'd say.

[sitefive]

How fast in theory should you find a block with a 5850 card? ( says 1.2mh/s speed in this miner) and with current difficulty (40)



Also im looking to buy 3k-10k of these coins!
PM ME with offers

[Bradlu]

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

i thought so as well.. but wasn't hitting anything. closed my wallet, made a start.bat script in the qqminer folder with "qqcoin-qt.exe -server", restarted my wallet with this .bat file, restarted solo-mining.bat, and have accrued 552 qqc accepted in the last 30-45 minutes now. maybe it was luck, maybe it was the start.bat... dunno. worth a try though i'd say.

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

i thought so as well.. but wasn't hitting anything. closed my wallet, made a start.bat script in the qqminer folder with "qqcoin-qt.exe -server", restarted my wallet with this .bat file, restarted solo-mining.bat, and have accrued 552 qqc accepted in the last 30-45 minutes now. maybe it was luck, maybe it was the start.bat... dunno. worth a try though i'd say.

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

i thought so as well.. but wasn't hitting anything. closed my wallet, made a start.bat script in the qqminer folder with "qqcoin-qt.exe -server", restarted my wallet with this .bat file, restarted solo-mining.bat, and have accrued 552 qqc accepted in the last 30-45 minutes now. maybe it was luck, maybe it was the start.bat... dunno. worth a try though i'd say.

So much rejection. Not very Quick.

Are you running cgminer? or qqminer? above you mention cgminer. Im using qqminer. Maybe thats why I hit few blocks

[phinino]

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

i thought so as well.. but wasn't hitting anything. closed my wallet, made a start.bat script in the qqminer folder with "qqcoin-qt.exe -server", restarted my wallet with this .bat file, restarted solo-mining.bat, and have accrued 552 qqc accepted in the last 30-45 minutes now. maybe it was luck, maybe it was the start.bat... dunno. worth a try though i'd say.

QQcoinminer --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

Get the qqminer from the first OP post.

[fud_etra]

run the wallet with the -server from a command line or batch file, not within the software GUI

Can you explain clearly how to run the wallet with the -server in 2 ways? Thanks.

[efx]

Yeah, it's ybcminer. Regular cgminer mining scrypt alone is never going to find anything valid.

Really, it's all pretty standard besides the above and the diff has just risen steadily in response to a pretty decent amount of hashrate. Of course, we hit a ton of orphans and stales, everyone should expect that by now. An adjustment algorithm capable of larger increases in diff might have been a good idea, but the 'trouble' period is mostly complete.

The first page really has all the information necessary to mine this coin.

[sitefive]

about How fast in theory should you find a block with a 5850 card? ( says 1.5mh/s speed in this miner) and with current difficulty (40)



Also im looking to buy 3k-10k of these coins!
PM ME with offers

[LitecoinRates]

run the wallet with the -server from a command line or batch file, not within the software GUI

Can you explain clearly how to run the wallet with the -server in 2 ways? Thanks.

Start
Run
CMD

Opens a command (DOS) window

Type qqcoin-qt.exe -server

or to do the same thing but from a file you can run more easily

Notepad, type in
qqcoin-qt.exe -server
save as "run.bat" in the same folder as qqcoin-qt.exe
run the BAT file

[drizzle2405]

I hit a block without doing the -server.  So who knows.

[Treggar]

Just compiled QQcoind on my CentOS machine, might test setting up a pool.

[mtbitcoin]

I had over a 1000 orphans blocks earlier but am almost getting zero orphans now ...

Mining is quite smooth and the difficulty is steadily creeping up. By the next few days days we are probably going to need pools for some decent mining

If you want to start mining this is the time before it gets too difficult

 Cheers

[efx]

run the wallet with the -server from a command line or batch file, not within the software GUI

Can you explain clearly how to run the wallet with the -server in 2 ways? Thanks.

I don't really understand what that means, but you have 3 options.

 1) add '-server' to the qqcoin.conf within your roaming directory. 2) you can create a shortcut of the qq QT client launcher and add '-server' to the end of the 'target' field for the shortcut. 3) use cmd prompt to change to the directory of your client (let's say it's on your desktop for this example) and launch it, ie 'cd desktop\QQcoins-Windows-qt\QQCoin-qt.exe -server'.



Never mind, you guys got it

[chip99]

im still getting a tons of rejections

[Tofer]

did you start up your wallet with a .bat containing "qqcoin-qt.exe - server"?

--topher--- that was meant for you. forgot to hit "quote".

I thought you enabled server through wallet.  I run qt app and it says it's synched
.conf
rpcuser=u
rpcpassword=p
rpcallowip=192.168.1.5
daemon=1
server=1
listen=1
gen=0
port=20111
rpcport=20112
addnode=10.0.0.48
addnode=66.45.255.119
addnode=206.72.193.8
.bat
cgminer --scrypt -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

i thought so as well.. but wasn't hitting anything. closed my wallet, made a start.bat script in the qqminer folder with "qqcoin-qt.exe -server", restarted my wallet with this .bat file, restarted solo-mining.bat, and have accrued 552 qqc accepted in the last 30-45 minutes now. maybe it was luck, maybe it was the start.bat... dunno. worth a try though i'd say.

QQcoinminer --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -o 127.0.0.1:20112 -u u  -p p  --thread-concurrency 8192  -I 17

Get the qqminer from the first OP post.

got the miner why does it says Im mining Mh and the difficulty is 45k

[efx]

Because it's not comparable to the scrypt hashrates we are used to seeing, I get 4 mh/s from a 7950 without tweaking anything.



Reducing scan and expiry time to ~ 1 might still be a good idea, '--scan-time 1 --expiry 1'