[ANN] Velocitycoin- Client Update 1.2.0- Important Update Immediately

[Tomatocage]

Here come the brand new accounts that were just created today (or in the next few days) with thousands of coins for sale...You gotta send first though. Let's see how many idiots fall for it!

[david1365]

using altexc pool, with my R9 290X I got 3.2 Mh/s is that OK?

Nope, you got lots of room for tweaking there.

What's your config.

My pool-miner.bat conf:
velocitycoinminer.exe --scrypt -o stratum+tcp://vcc.altexc.com:3334  -u worker name -p passwod --auto-fan  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
velocitycoinminer -o stratum+tcp://vcc.altexc.com:3334 -u  -p  --Nfmin 4 --Nfmax 30 --StartT 1387769316 --scrypt --lookup-gap 2 --thread-concurrency 8193 -I 13 -w 256 -g 2 --gpu-engine 833 --gpu-memclock 1200
This should give you 4.3mHps and low temps

thanks, but with default conf, works fine and temp stable @ 72

[112tigra112]

I'm a loser  





Who can give a speed of 30 minutes?

Code:

velocitycoinminer.exe --scrypt -o http://vcc.altexc.com:3334  -u 112tigra112.x -p xxx  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

VQPm62ch7MM7dUqpMuRrG2XS5w8NJQRizW

[Sparkzor]

using altexc pool, with my R9 290X I got 3.2 Mh/s is that OK?

Nope, you got lots of room for tweaking there.

What's your config.

My pool-miner.bat conf:
velocitycoinminer.exe --scrypt -o stratum+tcp://vcc.altexc.com:3334  -u worker name -p passwod --auto-fan  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
velocitycoinminer -o stratum+tcp://vcc.altexc.com:3334 -u  -p  --Nfmin 4 --Nfmax 30 --StartT 1387769316 --scrypt --lookup-gap 2 --thread-concurrency 8193 -I 13 -w 256 -g 2 --gpu-engine 833 --gpu-memclock 1200
This should give you 4.3mHps and low temps

thanks, but with default conf, works fine and temp stable @ 72

Yeah but you only have 3.3mHps
I'm using the one I linked to you atm.

[ndndr]

I am using this pool http://vcc.altexc.com/index.php and getting this error " rejected-share is above target " does any one know how to fix it ?

[david1365]

using altexc pool, with my R9 290X I got 3.2 Mh/s is that OK?

Nope, you got lots of room for tweaking there.

What's your config.

My pool-miner.bat conf:
velocitycoinminer.exe --scrypt -o stratum+tcp://vcc.altexc.com:3334  -u worker name -p passwod --auto-fan  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
velocitycoinminer -o stratum+tcp://vcc.altexc.com:3334 -u  -p  --Nfmin 4 --Nfmax 30 --StartT 1387769316 --scrypt --lookup-gap 2 --thread-concurrency 8193 -I 13 -w 256 -g 2 --gpu-engine 833 --gpu-memclock 1200
This should give you 4.3mHps and low temps

thanks, but with default conf, works fine and temp stable @ 72

Yeah but you only have 3.3mHps
I'm using the one I linked to you atm.

With ur conf I got about 2Mh/s, what's wrong?

[vrm86]

Holy crap! I was mining on Intensity=11 and got 1/4 hashrate I could have  
Set 13 already

[chip99]

I'm a loser  





Who can give a speed of 30 minutes?

Code:

velocitycoinminer.exe --scrypt -o http://vcc.altexc.com:3334  -u 112tigra112.x -p xxx  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

VQPm62ch7MM7dUqpMuRrG2XS5w8NJQRizW

10 VEL was sent to you 

[112tigra112]

I'm a loser  





Who can give a speed of 30 minutes?

Code:

velocitycoinminer.exe --scrypt -o http://vcc.altexc.com:3334  -u 112tigra112.x -p xxx  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

VQPm62ch7MM7dUqpMuRrG2XS5w8NJQRizW

10 VEL was sent to you 

thank you very much)))

[Sparkzor]

using altexc pool, with my R9 290X I got 3.2 Mh/s is that OK?

Nope, you got lots of room for tweaking there.

What's your config.

My pool-miner.bat conf:
velocitycoinminer.exe --scrypt -o stratum+tcp://vcc.altexc.com:3334  -u worker name -p passwod --auto-fan  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
velocitycoinminer -o stratum+tcp://vcc.altexc.com:3334 -u  -p  --Nfmin 4 --Nfmax 30 --StartT 1387769316 --scrypt --lookup-gap 2 --thread-concurrency 8193 -I 13 -w 256 -g 2 --gpu-engine 833 --gpu-memclock 1200
This should give you 4.3mHps and low temps

thanks, but with default conf, works fine and temp stable @ 72

Yeah but you only have 3.3mHps
I'm using the one I linked to you atm.

With ur conf I got about 2Mh/s, what's wrong?

I've got no clue...

[hvezdasmrti]

MINING 2 Mhashes at each card (R9 270s at gigabyte OC defaults) with intensity 19 and TC 16000 but the cards are still too cold. Its my only heating in my room and its cold here. Normally the cards have 70-75 digrees and with that crap they have only 59-60 digrees. They dont seem to be utilized fully. Where is the problem? IM COLD!

[chip99]

Holy crap! I was mining on Intensity=11 and got 1/4 hashrate I could have  
Set 13 already

set 20 for maximum power 

[LitecoinRates]

mine run much cooler too. Could you post your command line plz, I'm only getting 1.6 each card

cheers

[Philll90]

MINING 2 Mhashes at each card (R9 270s at gigabyte OC defaults) with intensity 19 and TC 16000 but the cards are still too cold. Its my only heating in my room and its cold here. Normally the cards have 70-75 digrees and with that crap they have only 59-60 digrees. They dont seem to be utilized fully. Where is the problem? IM COLD!

Same here. With my 280x I get 4,600 mh/s with intensity 20 but is still cold @65 degrees. Normally I get with intensity 13 in cgminer temps around 75 degrees.
A bit confusing  

[drizzle2405]

The difficulty level is insano!   

[ndndr]

OK I entered "velocitycoinminer -I 13 -g 2 -w 256 --thread-concurrency 8192 -o vcc.altexc.com:3334 -u ACCOUNT.WORKER -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316"  ...inside the pool miner.bat file and replaced the account and password with my credentials and when I start the velocityCoinminer.exe  I am still getting this error "need to specify alteast one pool server"...does anyone know how to fix it ?. I am running a single 7790 card

[tokona]

Why is solo faster than pool. Solo was 300kh/s and pool 70kh/s...

[Heli42]

Hey Guys,

we have already opened a new pool for alternative currencys

specialy for Velocity Coin here: http://velocitycoin.miners-point.com/

www.miners-point.com

dynamic stratum

regards 

[LitecoinRates]

OK I entered "velocitycoinminer -I 13 -g 2 -w 256 --thread-concurrency 8192 -o vcc.altexc.com:3334 -u ACCOUNT.WORKER -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316"  ...inside the pool miner.bat file and replaced the account and password with my credentials and when I start the velocityCoinminer.exe  I am still getting this error "need to specify alteast one pool server"...does anyone know how to fix it ?. I am running a single 7790 card

add stratum+tcp:// in front of "vcc.alt......" so it reads -o stratum+tcp://vcc.altexc.com:333

[Frederor]

I'm having trouble opening the wallet file. I'm getting the following error message on Ubuntu:

root@Drop:~# Velocitycoind
Error: To use bitcoind, you must set a rpcpassword in the configuration file:
 /root/.Velocitycoin/Velocitycoin.conf
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=3NRobApXUhDgiFKKpQ1bTBpYUvJP8FsuXMJ9xUDapKS6
(you do not need to remember this password)
If the file does not exist, create it with owner-readable-only file permissions.

I do have a password set in the .conf file, so I don't know what's wrong. Can anyone please help?