atp1916
Legendary
Offline
Activity: 854
Merit: 1000
|
|
January 05, 2014, 04:49:33 PM |
|
YACminer (YBCminer) still uses the --thread-concurrency / -i / -w / -g flags because it is a fork of cgminer.
In other words, use your cgminer config for those flags.
|
|
|
|
lichao1395427
|
|
January 05, 2014, 04:52:22 PM |
|
This coin is very similiar to velocitycoin.
Due to scrypt-jane, your gpu miners will be less effective as time goes on making coin generation slower and slower.
I am using miner (ybcminer version 3.3.1.) for the first time.. absolutelly dont know how to set it up.. If I use same setting from cgminer where I am getting 700 khs, here it gives me just 275 khs.. is this normal or I am doing something wrong? Is CPU mining in other hand more effective on scrypt jane than on normal scrypt? try it use you cgminer.conf Value -I TC gpu-enginer and gpu-memclock gpuminer --scrypt --Nfmin 4 --Nfmax 30 --StartT xxxxx -o stratum+tcp://xxxx:xxxx -u used.1 -p 1 --intensity 19 -g 1 --thread-concurrency 15456 --gpu-engine 1140 --gpu-memclock 1500
|
|
|
|
jayguar
|
|
January 05, 2014, 04:57:38 PM |
|
This coin is very similiar to velocitycoin.
Due to scrypt-jane, your gpu miners will be less effective as time goes on making coin generation slower and slower.
I am using miner (ybcminer version 3.3.1.) for the first time.. absolutelly dont know how to set it up.. If I use same setting from cgminer where I am getting 700 khs, here it gives me just 275 khs.. is this normal or I am doing something wrong? Is CPU mining in other hand more effective on scrypt jane than on normal scrypt? If you get 700 kh/s from cgminer, you would probably get around 5 Mh/s with low diff in scrypt-jane and it will reduce when diff increases. I started mining Applecoin 2nd after launch and I got around 4 Mh/s and now its just 230 kh/s. I get around 600 kh/s in cgminer.
|
|
|
|
blacklig
|
|
January 05, 2014, 05:07:50 PM Last edit: January 05, 2014, 05:28:13 PM by blacklig |
|
This coin is very similiar to velocitycoin.
Due to scrypt-jane, your gpu miners will be less effective as time goes on making coin generation slower and slower.
I am using miner (ybcminer version 3.3.1.) for the first time.. absolutelly dont know how to set it up.. If I use same setting from cgminer where I am getting 700 khs, here it gives me just 275 khs.. is this normal or I am doing something wrong? Is CPU mining in other hand more effective on scrypt jane than on normal scrypt? If you get 700 kh/s from cgminer, you would probably get around 5 Mh/s with low diff in scrypt-jane and it will reduce when diff increases. I started mining Applecoin 2nd after launch and I got around 4 Mh/s and now its just 230 kh/s. I get around 600 kh/s in cgminer. Really? Is it like that? So with diff increasing, hashing power is decreasing? Wow.. Yup, I can confirm your value.. I am just test-mining applecoin on coin-base.info and miner runs 275 khs, on cgminer I am getting 700 out of R280X, so your words must be true My config for APC right now is:¨ ApplecoinMiner --Nfmin 4 --Nfmax 30 --StartT 1384720832 -o stratum+tcp://coin-base.info:3460 -u blacklig.211 -p x --scrypt --gpu-engine 1000 --gpu-memclock 1480 --gpu-fan 100 --gpu-vddc 1.2 --gpu-powertune 20 -I 13 -g 2 -w 256 --shaders 2432 --thread-concurrency 8704 seems legit? Anyway, eventhough miner shows me 275 for APC, on pool it shows me just 65.. I am mining there like 30 minutes now.. On normal pools this hashrates has like 5 minutes lag, but here it doesnt seem it is lag.. is it possible that I am mining ever much less than miner shows? EDIT: so I had to decrease intensity to 12, with 13 it was giving me many HW errors, I just overlooked it in miner.. so that is why in pool I was just like 60ish.. now with I12 it runs 268 in miner, pool already showing 236 and still increasing so looking good..
|
|
|
|
yzzo
|
|
January 05, 2014, 05:20:32 PM |
|
About cpuminer software?
Can minerd be good?
|
|
|
|
myrinx
Newbie
Offline
Activity: 28
Merit: 0
|
|
January 05, 2014, 05:29:45 PM |
|
I'm willing to make a pooljunkie pool. Please read your pm and reply to me. I've sent that last week...
|
|
|
|
jayguar
|
|
January 05, 2014, 05:34:10 PM |
|
My config for APC right now is:¨ ApplecoinMiner --Nfmin 4 --Nfmax 30 --StartT 1384720832 -o stratum+tcp://coin-base.info:3460 -u blacklig.211 -p x --scrypt --gpu-engine 1000 --gpu-memclock 1480 --gpu-fan 100 --gpu-vddc 1.2 --gpu-powertune 20 -I 13 -g 2 -w 256 --shaders 2432 --thread-concurrency 8704
seems legit?
Anyway, eventhough miner shows me 275 for APC, on pool it shows me just 65.. I am mining there like 30 minutes now.. On normal pools this hashrates has like 5 minutes lag, but here it doesnt seem it is lag.. is it possible that I am mining ever much less than miner shows?
I'm not sure about the thread-concurrency. I usually use 21712 or 22400 when mining scrypt based coins. My settings are --gpu-engine 1100 --gpu-memclock 1350 --gpu-powertune 20 -I 19. I mine with HD 7950 GPU. You can try the other pools to see if you get a similar hash rate. About cpuminer software?
Can minerd be good?
You can try the cpu miner from the following link. It is Applecoin CPU miner. Win64 - https://docs.google.com/file/d/0B9cvOfoOekSddG9LY2Q0SnNzZk0/edit?usp=sharing&pli=1Win32 - http://www30.zippyshare.com/v/91097397/file.html
|
|
|
|
yzzo
|
|
January 05, 2014, 05:59:28 PM |
|
My config for APC right now is:¨ ApplecoinMiner --Nfmin 4 --Nfmax 30 --StartT 1384720832 -o stratum+tcp://coin-base.info:3460 -u blacklig.211 -p x --scrypt --gpu-engine 1000 --gpu-memclock 1480 --gpu-fan 100 --gpu-vddc 1.2 --gpu-powertune 20 -I 13 -g 2 -w 256 --shaders 2432 --thread-concurrency 8704
seems legit?
Anyway, eventhough miner shows me 275 for APC, on pool it shows me just 65.. I am mining there like 30 minutes now.. On normal pools this hashrates has like 5 minutes lag, but here it doesnt seem it is lag.. is it possible that I am mining ever much less than miner shows?
I'm not sure about the thread-concurrency. I usually use 21712 or 22400 when mining scrypt based coins. My settings are --gpu-engine 1100 --gpu-memclock 1350 --gpu-powertune 20 -I 19. I mine with HD 7950 GPU. You can try the other pools to see if you get a similar hash rate. About cpuminer software?
Can minerd be good?
You can try the cpu miner from the following link. It is Applecoin CPU miner. Win64 - https://docs.google.com/file/d/0B9cvOfoOekSddG9LY2Q0SnNzZk0/edit?usp=sharing&pli=1Win32 - http://www30.zippyshare.com/v/91097397/file.htmlThanks
|
|
|
|
djeZo
|
|
January 05, 2014, 06:04:55 PM |
|
Will this coin start with low diff too?
OP, if you are accepting suggestions, I highly recommend you to do either diff adjustment every block or start with high diff (4+ at least).
|
|
|
|
jayguar
|
|
January 05, 2014, 06:08:39 PM |
|
Is the launch time 21.00 GMT confirmed or will there be a delay?
|
|
|
|
blacklig
|
|
January 05, 2014, 06:10:37 PM |
|
Why is on pool in getting started this:
2. Download a miner. CGMiner Linux/Windows: Download here CGMiner Mac OS X: Download here CPU Miner Mac/Linux/Windows: precompiled binaries are available Download here. 3. Configure your miner. Settings for Stratum (recommended):
STRATUM: stratum+tcp://WAIT07UTC PORT: 3333 Username: Weblogin.Worker Password: Worker Password If you use a command-line miner, type:
! WILL BE UPDATED ON January 5th 07:00 UTC ! ./cgminer --scrypt -o stratum+tcp://:3333 -u Weblogin.Worker -p Worker password
So will cgminer work on it or not?
|
|
|
|
nod
|
|
January 05, 2014, 06:27:39 PM |
|
Why is on pool in getting started this:
2. Download a miner. CGMiner Linux/Windows: Download here CGMiner Mac OS X: Download here CPU Miner Mac/Linux/Windows: precompiled binaries are available Download here. 3. Configure your miner. Settings for Stratum (recommended):
STRATUM: stratum+tcp://WAIT07UTC PORT: 3333 Username: Weblogin.Worker Password: Worker Password If you use a command-line miner, type:
! WILL BE UPDATED ON January 5th 07:00 UTC ! ./cgminer --scrypt -o stratum+tcp://:3333 -u Weblogin.Worker -p Worker password
So will cgminer work on it or not?
No, sorry I didn't updated the page, you'll have to use qqcoinminer
|
|
|
|
blacklig
|
|
January 05, 2014, 06:37:01 PM |
|
Why is on pool in getting started this:
2. Download a miner. CGMiner Linux/Windows: Download here CGMiner Mac OS X: Download here CPU Miner Mac/Linux/Windows: precompiled binaries are available Download here. 3. Configure your miner. Settings for Stratum (recommended):
STRATUM: stratum+tcp://WAIT07UTC PORT: 3333 Username: Weblogin.Worker Password: Worker Password If you use a command-line miner, type:
! WILL BE UPDATED ON January 5th 07:00 UTC ! ./cgminer --scrypt -o stratum+tcp://:3333 -u Weblogin.Worker -p Worker password
So will cgminer work on it or not?
No, sorry I didn't updated the page, you'll have to use qqcoinminer Ok, good Can I use ybcminer? Or is qqcoinminer better? Sorry for lame questions.. I never minted this jane scrypt coins :p
|
|
|
|
luckytiger
Member
Offline
Activity: 96
Merit: 10
|
|
January 05, 2014, 06:52:47 PM |
|
Why is on pool in getting started this:
2. Download a miner. CGMiner Linux/Windows: Download here CGMiner Mac OS X: Download here CPU Miner Mac/Linux/Windows: precompiled binaries are available Download here. 3. Configure your miner. Settings for Stratum (recommended):
STRATUM: stratum+tcp://WAIT07UTC PORT: 3333 Username: Weblogin.Worker Password: Worker Password If you use a command-line miner, type:
! WILL BE UPDATED ON January 5th 07:00 UTC ! ./cgminer --scrypt -o stratum+tcp://:3333 -u Weblogin.Worker -p Worker password
So will cgminer work on it or not?
No, sorry I didn't updated the page, you'll have to use qqcoinminer Ok, good Can I use ybcminer? Or is qqcoinminer better? Sorry for lame questions.. I never minted this jane scrypt coins :p all the same they just changed the names
|
|
|
|
opnoskatt
Member
Offline
Activity: 84
Merit: 10
|
|
January 05, 2014, 06:53:25 PM |
|
Will the sse4 minerd work for this? I'm assuming this is another quark based... let me know if this looks right for CPU mining:
minerd64_sse4 -a quark -t 64 -o stratum+tcp://xxxxxxxx:3333 -u username -p password
-----or---- is it more like Apple?
minerd.exe --url stratum+tcp://xxxxxxxx:3333 --user username --password password --threads 64
|
Address list -> seems to be the cool thing to do, you can give me cryptocash for nothing! FZ: FA3HLhx8iyGPniYoHHyDxMREno6KtwnoiY XPM: AdKrkQzdJmQPrx2Kujybycrxt5yvN4n1W8
|
|
|
illodin
|
|
January 05, 2014, 06:54:32 PM |
|
The -a parameter must be scrypt-jane, but I don't think the default minerd supports that.
|
|
|
|
albertdros
|
|
January 05, 2014, 06:55:12 PM |
|
Will the sse4 minerd work for this? I'm assuming this is another quark based... let me know if this looks right for CPU mining:
minerd64_sse4 -a quark -t 64 -o stratum+tcp://xxxxxxxx:3333 -u username -p password
-----or---- is it more like Apple?
minerd.exe --url stratum+tcp://xxxxxxxx:3333 --user username --password password --threads 64
this is not quark based....
|
|
|
|
opnoskatt
Member
Offline
Activity: 84
Merit: 10
|
|
January 05, 2014, 06:59:17 PM |
|
Will the sse4 minerd work for this? I'm assuming this is another quark based... let me know if this looks right for CPU mining:
minerd64_sse4 -a quark -t 64 -o stratum+tcp://xxxxxxxx:3333 -u username -p password
-----or---- is it more like Apple?
minerd.exe --url stratum+tcp://xxxxxxxx:3333 --user username --password password --threads 64
this is not quark based.... In other words you have no idea how to configure the miner, thank you for your insight.
|
Address list -> seems to be the cool thing to do, you can give me cryptocash for nothing! FZ: FA3HLhx8iyGPniYoHHyDxMREno6KtwnoiY XPM: AdKrkQzdJmQPrx2Kujybycrxt5yvN4n1W8
|
|
|
w0lf0.
|
|
January 05, 2014, 07:00:09 PM |
|
"Download qqcoinminer!!"
is obligatory? cgminer doesn't work?
|
|
|
|
Kapitan
Newbie
Offline
Activity: 29
Merit: 0
|
|
January 05, 2014, 07:03:19 PM |
|
"Change launching date. Need more time for testing. We promise Wallet Windows and Pool at launch." Ok
|
|
|
|
|