nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 01, 2014, 03:25:01 AM Last edit: January 01, 2014, 03:35:38 AM by nnay_th |
|
Hello everyone! I started mining WDC a couple of months ago with my gaming PC, then got caught in the game. I bought a mining rig a couple of weeks ago: Asrock 970 Extreme4 AMD Sempron 145 2x2GB Hynix DDR3 3x Asus R9 280X DCU2 Top Win 7 64-bit. It is working great (about 720kh/s each) until I bought a fourth GPU. I decided to get 4 powered risers (PCIe 1x to 16x). When I use those, only one GPU is recognized, on the PCIe5 connector with a lower hashrate (600kh/s). And sometimes the fan of the GPU in the PCIe1 connector do not spin. I tried several connectors, and the only difference I had was a totally black screen. All the GPUs are working fine if they are connected directly on the PCIe 16x connectors, but there are only three of those and heat is an issue. Did anyone had this issue before? Also, I don't know if it is relevant, but the powered risers have only a +12V molex connector, without Ground. Thank you and Happy New Year!!!
|
|
|
|
|
cryptoprime
Newbie
Offline
Activity: 57
Merit: 0
|
|
January 01, 2014, 06:13:27 AM |
|
|
|
|
|
justkid
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 01, 2014, 09:46:37 AM |
|
What psu are you using?
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 01, 2014, 01:20:30 PM |
|
Hi suzanneg, This is exactly where I got my info about building a rig! Best tutorial I could find so far! The difference is that I intend to use 4 GPUs with 4 powered PCIe 1x to 16x risers. Hi cryptoprime, Yes I'm considering doing this, but I can't find info from owners of the same mobo. Do you know if I can safely short a PCI x16 slot? I found infos about shorting a 1x slot, but nothing about the 16x slots. Also I read stories from people frying their mobo shortly after shorting their PCIe ports... simply horrifying.. What psu are you using?
Hi justkid, I have two Akasa Cobra 850w running on the same rig, which are intended to power two GPUs each. With a total of 1700w, I think that might not be the issue.
|
|
|
|
dminer69
|
|
January 01, 2014, 01:57:53 PM |
|
i had some what the some problem with my first rig evga x58 ftw3, i had to get 16x riser on the 3 pci e and one power 4 pin on my four card and i wouldnt get 100% on my 3rd and 4th card, so i ratter keep my rigs at 3 cards.
you could always get your self some use parts on ebay to run an extra card or 2 , did it my self got my self a dual pci e board for 50 bucks on ebay and i was able to run 3 cards on it.
|
|
|
|
Peilo123
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 01, 2014, 02:22:04 PM |
|
Hi suzanneg, This is exactly where I got my info about building a rig! Best tutorial I could find so far! The difference is that I intend to use 4 GPUs with 4 powered PCIe 1x to 16x risers. Hi cryptoprime, Yes I'm considering doing this, but I can't find info from owners of the same mobo. Do you know if I can safely short a PCI x16 slot? I found infos about shorting a 1x slot, but nothing about the 16x slots. Also I read stories from people frying their mobo shortly after shorting their PCIe ports... simply horrifying.. What psu are you using?
Hi justkid, I have two Akasa Cobra 850w running on the same rig, which are intended to power two GPUs each. With a total of 1700w, I think that might not be the issue. Maybe one of powered riser's is damaged? I dont know for sure, but a PCI x1 slot just got about 500Mb/s in each direction and my solo mining gpu produces a heavy amount of traffic. when start copying files between 2 harddrive's while mining, i just got half the i normally got. So maybe a PCI 2.0 1x slot hasn't enough bandwith to fuel a HD7970/R280X
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 01, 2014, 02:57:27 PM |
|
i had some what the some problem with my first rig evga x58 ftw3, i had to get 16x riser on the 3 pci e and one power 4 pin on my four card and i wouldnt get 100% on my 3rd and 4th card, so i ratter keep my rigs at 3 cards.
you could always get your self some use parts on ebay to run an extra card or 2 , did it my self got my self a dual pci e board for 50 bucks on ebay and i was able to run 3 cards on it.
well that would really be the last thing I would do, since I know people are successfully using 5 GPUs on an Asrock 970 Ex4, but I'm starting considering it at least temporary, just the time it takes to solve this matter as I don't like having an extra GPU sitting there idling. Hi suzanneg, This is exactly where I got my info about building a rig! Best tutorial I could find so far! The difference is that I intend to use 4 GPUs with 4 powered PCIe 1x to 16x risers. Hi cryptoprime, Yes I'm considering doing this, but I can't find info from owners of the same mobo. Do you know if I can safely short a PCI x16 slot? I found infos about shorting a 1x slot, but nothing about the 16x slots. Also I read stories from people frying their mobo shortly after shorting their PCIe ports... simply horrifying.. What psu are you using?
Hi justkid, I have two Akasa Cobra 850w running on the same rig, which are intended to power two GPUs each. With a total of 1700w, I think that might not be the issue. Maybe one of powered riser's is damaged? I dont know for sure, but a PCI x1 slot just got about 500Mb/s in each direction and my solo mining gpu produces a heavy amount of traffic. when start copying files between 2 harddrive's while mining, i just got half the i normally got. So maybe a PCI 2.0 1x slot hasn't enough bandwith to fuel a HD7970/R280X Well I have 5 PCI risers, and I tried to use only one at a time while the three other GPUs are connected directly to the mobo. The ones on the mobo are detected, but not the one on the riser. I tried each riser, unsuccessfully. I even tried to short the presence pins, but no change...
|
|
|
|
Thomza
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 01, 2014, 07:30:34 PM |
|
I have the same problem. I have 5 of these boards and on all of them i cant get 4 gpus to work on x1-x16 powered risers.
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 01, 2014, 07:55:51 PM |
|
I have the same problem. I have 5 of these boards and on all of them i cant get 4 gpus to work on x1-x16 powered risers.
hi Thomza, were you able to run at least one GPU with a powered riser? I have talked to my PCIE riser supplier (a really great guy), he told me that he always has problems with this particular mobo and powered risers. I'm considering getting another motherboard, but I need to make more research. I want to find the sweet mobo that will take 4 GPUs on powered risers no question asked.
|
|
|
|
Thomza
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 01, 2014, 08:05:00 PM |
|
I can get 2 on risers at most. One in the first x16 slot and one in last x1 slot and one directly on the board. Didnt yet try all the combinations but at least im running 3 of them for now. I can run 4 gpus on ASUS M5A97 R2.0 without any problems.
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 01, 2014, 08:26:03 PM |
|
I can get 2 on risers at most. One in the first x16 slot and one in last x1 slot and one directly on the board. Didnt yet try all the combinations but at least im running 3 of them for now. I can run 4 gpus on ASUS M5A97 R2.0 without any problems.
Good to know for the ASUS M5A97 R2.0! Are all your 4 gpus on powered riser on this one? If so, are they 1x to 16x risers or 16x to 16x? Thanks mate!
|
|
|
|
Thomza
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 01, 2014, 08:38:16 PM |
|
All powered x1-x16 risers on r9 290s
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 01, 2014, 11:22:19 PM |
|
Just ordered my ASUS M5A97 LE, I'll let you know. I keep my fingers crossed
|
|
|
|
Thomza
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 02, 2014, 03:09:08 PM Last edit: January 02, 2014, 03:39:36 PM by Thomza |
|
I got them to work now. It turned out i had a few defected risers. All of my asrock boards now work with risers on pce1, pcie2, pcie3, pcie5. Don't know whats why it doesn't work on pcie4.
|
|
|
|
kenshirothefist
|
|
January 02, 2014, 03:27:13 PM |
|
You should be very very careful with those powered x1-x16 risers ... These are no extra-quality cables, but merely quick&dirty china-hand-made cables. They requires very gentle handling - you shouldn't do any rolling or bending of the cables otherwise the cable and/or power connector might detach from the "extension slot". And one other thing to be very careful with x1-x16 risers -> if you are putting them into x16 slot you can easily insert it in the wrong direction - in this case it will burn the riser and if you are unlucky it might even burn the PCIe slot or the GPU. So, careful when using those risers!
|
|
|
|
VariableDiff
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 02, 2014, 03:35:34 PM |
|
I had ordered kind of good risers, but as i found it out lately, they were wrongly done, and i got burned my MB and risers.
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 03, 2014, 12:00:47 AM |
|
I got them to work now. It turned out i had a few defected risers. All of my asrock boards now work with risers on pce1, pcie2, pcie3, pcie5. Don't know whats why it doesn't work on pcie4.
Great news! Have you tried shorting the PCIE4?
|
|
|
|
Thomza
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 03, 2014, 09:41:39 AM |
|
no and i dont intend to...
|
|
|
|
nnay_th (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 04, 2014, 03:38:53 AM |
|
So, I got an Asus M5A97 LE R2.0. The good news is that I can get two GPUs to work in the two PCIe 16x slots with 1x to 16x risers... And apparently, I also have two faulty risers as they do not seem to work in those slots... The bad news is that I can't get the risers to work in the PCIe 1x slots... And I'll have to RMA the M5A97 as the first PCIe 1x is missing a pin... Well, it's better but still bad luck... I also have a GPU to RMA as it generates a LOT of vibration... Asus, Asus, what are you becoming??
|
|
|
|
|