joemde
Newbie
Offline
Activity: 45
Merit: 0
|
|
April 22, 2014, 02:36:58 AM |
|
Payment for the 26 miners sent
TXID 2b44dcc62733fe89e53a55af9e386fe2bf810cd4d814fcae29e8680f39ddc5a8
Bit-Tech please confirm receipt of funds
Thanks, Joemde
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
April 22, 2014, 02:37:49 AM |
|
He sold 2 in stock units before I could pay so it is now 26
Does that mean you are out of stock Bit-Tech?
|
|
|
|
Bit-Tech (OP)
Member
Offline
Activity: 226
Merit: 10
|
|
April 22, 2014, 02:40:15 AM |
|
He sold 2 in stock units before I could pay so it is now 26
Does that mean you are out of stock Bit-Tech? Correct we are out of stock now. Producing 100 more units should be avaible in 1-2 weeks maximum.
|
|
|
|
bitmind
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 22, 2014, 03:01:37 AM |
|
I bought 1x right before the 26.
Please confirm that you have received my payment. 1HwspPgZDUgWcPSeCieQ4yFG8qdYWDqMKn
TX ID: 980f75557d3d7d6016fb81da72b923c282c793716801726db8423fb38deea022
|
|
|
|
sbfree
|
|
April 22, 2014, 03:31:54 AM |
|
He sold 2 in stock units before I could pay so it is now 26
Does that mean you are out of stock Bit-Tech? Correct we are out of stock now. Producing 100 more units should be avaible in 1-2 weeks maximum. if all goes well I will probably line up again
|
|
|
|
btcshiner
|
|
April 22, 2014, 03:55:48 AM |
|
email sent would like to use escrow through OgNasty. Sent a heads up PM to him.
Was my order one of the two that you received before the large order? OGnasty has the refund address if not.
|
|
|
|
Bit-Tech (OP)
Member
Offline
Activity: 226
Merit: 10
|
|
April 22, 2014, 04:00:06 AM |
|
email sent would like to use escrow through OgNasty. Sent a heads up PM to him.
Was my order one of the two that you received before the large order? OGnasty has the refund address if not. Only order i accepted by escrow is sbfree, remaining is out of stock. sorry guys
|
|
|
|
500crypto
Newbie
Offline
Activity: 36
Merit: 0
|
|
April 22, 2014, 04:01:58 AM |
|
Any chance of participating? am I too late?
|
|
|
|
bitmind
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 22, 2014, 04:18:05 AM |
|
email sent would like to use escrow through OgNasty. Sent a heads up PM to him.
Was my order one of the two that you received before the large order? OGnasty has the refund address if not. Only order i accepted by escrow is sbfree, remaining is out of stock. sorry guys I believe 2nd one is my purchase paid through BTC. TXID: 980f75557d3d7d6016fb81da72b923c282c793716801726db8423fb38deea022 Bit-tech, please confirm. If not, please refund. Thanks
|
|
|
|
btcshiner
|
|
April 22, 2014, 04:24:55 AM |
|
email sent would like to use escrow through OgNasty. Sent a heads up PM to him.
Was my order one of the two that you received before the large order? OGnasty has the refund address if not. Only order i accepted by escrow is sbfree, remaining is out of stock. sorry guys Quick response and refunded ready. Thanks bit-tech and OGnasty.
|
|
|
|
tzortz
|
|
April 22, 2014, 10:25:16 AM Last edit: April 22, 2014, 02:28:23 PM by tzortz |
|
Got today my 2 Bittech miners.
Thank you !
Everything perfect! I did NOT use escrow and the guys are decent.
Sorry if I was aggressive at the beginning.
Waiting for your next batch!!!
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
April 22, 2014, 02:23:24 PM |
|
Yeah, waiting for the next batch as well Hopefully the next one I buy will be closer to 1tHs instead of the current 950gHs I'm getting
|
|
|
|
s1lverbox
Legendary
Offline
Activity: 2324
Merit: 1039
|
|
April 22, 2014, 02:50:26 PM |
|
Im interested in that. i will take 3 units once they avalaible. To guys who received units can you provide info about quality etc?
|
|
|
|
tzortz
|
|
April 22, 2014, 03:05:54 PM |
|
Im interested in that. i will take 3 units once they avalaible. To guys who received units can you provide info about quality etc?
Nice machines, similar to lketc dragons, 4 blades. Hashing average to 950gh/s . i will try to post pics tommorow. ps. Here are pics from Xian01 https://bitcointalk.org/index.php?topic=409701.msg6284148#msg6284148
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
Collider
|
|
April 22, 2014, 03:16:04 PM Last edit: April 22, 2014, 04:06:04 PM by Collider |
|
Can anyone share some insight on the setup?
I am truly desperate at this point. I set up my router to the ip range 192.168.0.x, after having changed the adapter settings of my lan card to multiple other popular ranges and scanning the network, still no sign of the unit, although i see the lan-port flickering on my router / switch that are connected to the device.
My device has the number 87 on the side, i tried 197.168.0.87
Any help would be appreciated. I already checked that the rasperry pi in the device is plugged in properly etc, i even put in another sd card and it started up fine.
I am not a newbie when it comes to setting up miners/networks but this one seems unreachable...
Edit:
I put the sdcard into another pi and connected it to a screen via hdmi. (I didn´t plug in the connetion cable to the device)
It says it is unable to mount the partition, does that mean the OS is damaged and i need to get a new image from somewhere? ("No filesystem could mount root, tried ext4")
|
|
|
|
braindead
|
|
April 22, 2014, 03:21:12 PM |
|
Can anyone share some insight on the setup?
I am truly desperate at this point. I set up my router to the ip range 192.168.0.x, after having changed the adapter settings of my lan card to multiple other popular ranges and scanning the network, still no sign of the unit, although i see the lan-port flickering on my router / switch that are connected to the device.
My device has the number 87 on the side, is this a hint to the static ip?
Any help would be appreciated. I already checked that the rasperry pi in the device is plugged in properly etc, i even put in another sd card and it started up fine.
I am not a newbie when it comes to setting up miners/networks but this one seems unreachable...
Edit:
I put the sdcard into another pi and connected it to a screen via hdmi. (I didn´t plug in the conncetion cable to the device)
It says it is unable to mount the partition, does that mean the OS is damaged and i need to get a new image from somewhere?
Go for 192.168.0.87 and voilá
|
|
|
|
Collider
|
|
April 22, 2014, 03:23:32 PM Last edit: April 22, 2014, 03:49:24 PM by Collider |
|
Can anyone share some insight on the setup?
I am truly desperate at this point. I set up my router to the ip range 192.168.0.x, after having changed the adapter settings of my lan card to multiple other popular ranges and scanning the network, still no sign of the unit, although i see the lan-port flickering on my router / switch that are connected to the device.
My device has the number 87 on the side, is this a hint to the static ip?
Any help would be appreciated. I already checked that the rasperry pi in the device is plugged in properly etc, i even put in another sd card and it started up fine.
I am not a newbie when it comes to setting up miners/networks but this one seems unreachable...
Edit:
I put the sdcard into another pi and connected it to a screen via hdmi. (I didn´t plug in the conncetion cable to the device)
It says it is unable to mount the partition, does that mean the OS is damaged and i need to get a new image from somewhere?
Go for 192.168.0.87 and voilá Thanks, i already tried that (in fact that was the first thing i tried, both via web interface and ssh, no device reached. Also, the first time i turned it on (without connection), the fans only turned gently. Now the fans turn full throttle all the time, although it is not mining. In my opinion that is another hint for a damaged operating system? ---> no fan input---> fans go full throttle? I also tried scanning the ip range 192.168.0.xx, no new devices there, router doesn´t show any new devices either. Has anyone got a download link for the firmware so i can try on another sdcard? I really think the sdcard is damaged.
|
|
|
|
|
braindead
|
|
April 22, 2014, 04:31:49 PM |
|
Hey man is your router on the 192.168.0.xxx If not you must connect miner directly to computer in order to find it
|
|
|
|
Collider
|
|
April 22, 2014, 05:27:54 PM Last edit: April 22, 2014, 07:13:26 PM by Collider |
|
Yes, router etc. was setup correctly, i am sure of it. I had connection to other devices on the ip-range too, and scanned the whole range just to be certain. I also connected directly and again scanned the whole range, nothing. Now i tried your image, however when i click on the stats page it gives me this: Error getting device list: ERR: socket connect(0) failed. I checked before and thought every board was properly connected. and Error getting version for 127.0.0.1:4028 ERR: socket connect(127.0.0.1:4028) failed This seems to be an error when the pool connection is not yet achieved. I am now certain that all network settings are correct, as the device can ping any website without problem. Edit: Its ALIVE! (muahaha) dont really know what i did to make it work though, it seems as though it will only take pool settings when you´re lucky ... atleast with the dragonminer firmware. Got a good 1th though, so thats nice.
|
|
|
|
|