Newbie setup Avalon Asic problems.

[hotmail6]

I have recently brought an Avalon 200GHz/s. I managed to setup and get started my status is Álive, but I have 0 accepted and 0 rejected with usually about 4 discarded. Also no fan speed and temp feedback.
Ive been trying different IP combinations for a couple of days now with no luck, my gateway is standard 192.168.0.1. I have a DLink DSL-2730B router that it is plugged into.
Has anyone had any similar problems/offer any help?

[pjcltd]

what pool setting have you setup ?

[hotmail6]

Pool setting?

[pjcltd]

Pool setting?

ok
on the web interface for your miner
there is a section for cgminer setup
what have you got on each line

[hotmail6]

Stratum+tcp://us1.EclipseMc.Com:3333

Hotmail6

And no password + I have run through this setup enough times that I'm only filling in pool at the moment.

Failover

Chip frequency (set to default 274? I'm at work so not sure)
Miner count 24

Apr allow W:127.0.0.1

--quiet

[pjcltd]

Stratum+tcp://us1.EclipseMc.Com:3333

Hotmail6

And no password + I have run through this setup enough times that I'm only filling in pool at the moment.

Failover

Chip frequency (set to default 274? I'm at work so not sure)
Miner count 24

Apr allow W:127.0.0.1

--quiet

ok if the info you posted is
right then thats not going to work

any chance you can do a screen shot ?

[hotmail6]

https://i.imgur.com/UhDD4kD.jpg

[pjcltd]

ok try just putting in

us1.EclipseMc.Com:3333

on the first line

[hotmail6]

Still the same. My status is alive but no blocks accepted.

[pjcltd]

Still the same. My status is alive but no blocks accepted.

where are you from ?
do you have team viewer installed ?

[hotmail6]

In Australia, just installing team view.

[pjcltd]

In Australia, just installing team view.

ok cool
send me a PM with the connection info
and i will jump on and have a look
for you.

[studio1one]

Miner count needs to be 16 for  200g With avalon 55nm chips but it sounds like a network issue.

[-ck]

Speed for 55nm chips should be 1500 and you should have firmware that shows the 55/110nm option so something's horribly wrong with your setup if you're running firmware not designed for it at speeds it doesn't support.

[studio1one]

Yup. Firmware is wrong version, for older miner

CGMiner config page should look like this

https://ip.bitcointalk.org/?u=http%3A%2F%2Fi44.tinypic.com%2F6tl5qd.jpg&t=536&c=LcJTTrnYAai3uA

sorry you are going to have to paste the address into your browser because I can't hotlink it.

[hotmail6]

Rhito.  I'm working nights for the next couple of days so won't get much time on it. I'll have to roll back the firmware. Any idea which revision you have linked above?

[studio1one]

20131123

[studio1one]

https://github.com/BitSyncom/cgminer-openwrt-packages

[hotmail6]

Beauty. Thanks ill give it a shot when I get home.

[hotmail6]

My firmware version is : 20130923

I have downloaded, so how do I go about installing the packages?