Antminer U1 problem help plz TwT

[karorogunso]

I start to mine with Antminer U1 (USB 1.6GH/s)

I just start mine a few day ago

but
http://puu.sh/6tShd.png (in BFGminer) [CGMiner is fine but got some bug.]
http://puu.sh/6tSQW.png (Driver)

did i do something wrong ?

and here my command
bfgminer.exe -S antminer:all -o us1.ghash.io:3333 -u xxx -p xxx --set-device antminer:clock=x0781

[marcocoin]

Hi,

I am using Win Vista sp2.

I have 2 Antmine U1 units.

I have the same problem with BFGminer 3.10. and cgminer 3.10.0.

I am now using cgminer 3.10.0, but can only get something like 400Mh/s.

I cannot get cgminer to accept setting freq 0781 settings.

cgminer will only accept ---  cgminer.exe -o pool.xxxxxxx.com:xxxx -u xxxx.xxxx -p xxxxxx

cgminer will not accept..

 --  cgminer.exe --bmsc-options 115200:20 -o pool.xxxxxxx.com:xxxx -u xxxx.xxxx -p xxxxxx --bmsc-freq 0781


BFGminer will not accept ..

.... bfgminer.exe -o pool.xxxxxx.com.xxxx -u myuser -p xxx -S antminer:all --set-device antminer:clock=x0781

I hope someone can help.
 

[nybbler905]

Hi,

I am using Win Vista sp2.

I have 2 Antmine U1 units.

I have the same problem with BFGminer 3.10. and cgminer 3.10.0.

I am now using cgminer 3.10.0, but can only get something like 400Mh/s.

I cannot get cgminer to accept setting freq 0781 settings.

cgminer will only accept ---  cgminer.exe -o pool.xxxxxxx.com:xxxx -u xxxx.xxxx -p xxxxxx

cgminer will not accept..

 --  cgminer.exe --bmsc-options 115200:20 -o pool.xxxxxxx.com:xxxx -u xxxx.xxxx -p xxxxxx --bmsc-freq 0781


BFGminer will not accept ..

.... bfgminer.exe -o pool.xxxxxx.com.xxxx -u myuser -p xxx -S antminer:all --set-device antminer:clock=x0781

I hope someone can help.
 

I couldn't find a version of CGMiner that would replicate the issue ( on Ubuntu 12 and re-built with the options for Icarus and other ASICS ) and only version 3.10.0 if BFGMiner will use the extra settings.  As an extra note the clock value 0781 is STOCK setting and can ( suposedly ) safely get moved to 0981 for a small increase before having to do surface mount soldering to the power resistors ( by adding 10k to the empty spot and swapping another ).  Also, BFGMiner reports faster hashing than CGMiner ( I have 1 with 3 Block Erupters on one system ) reliably.  Compared to the pool's reported hash rate, CGMiner seems to over estimate and is slow, BFGMiner seems spot on.

EDITED TO ADD A LINK THAT DOES HELP!

https://bitcointalk.org/index.php?topic=390929.0

[-ck]

None of those commands are relevant to the official cgminer that supports U1s. Use the latest version, 3.12.3 for full support and use the commands suitable for it (--anu-freq) only.