[ANN][POOL][VARDIFF][NYAN] Nyancoin Pool 1% Fee - Anti-DDoS - www.nyanpool.net

[rippy]

WWW.NYANPOOL.NET
Hey all been a supporter of Nyancoin since launch and with the dev announcing today that the coin is
officially licensed by the Nyancat creator i have decided to
setup a pool to deal with increase of miners.

The pool can be accessed at:
www.nyanpool.net

Pool Information:
Payout Method: PROP
Pool Fee's: 1%
Confirms for Payout: Only 30 confirms before payout unlike other pools set at 120!
Automatic Payout Threshold: 50-500 (can be modified if users prefer higher / lower.)

The server we are using should be able to cope with a large amount of users for those interested the specs are:
CPU: Intel Xeon W3530 4 Cores / 4 Threads @ 2.8ghz+
RAM: 48GB
Connection: 1 Gbps + Anti-DDoS

NOTE: If your having trouble getting to website using www.nyanpool.net then you can use http://192.99.10.167/,
same goes for mining if you can't connect with the domain name just use the IP but www.nyanpool.net should be working now as domain seems to have fully propagated.
If you have any question feel free to pm me or post in this thread. Thanks

[verbal]

thanks for that  switching my rig over asap   

[rippy]

thanks for that  switching my rig over asap   

Thanks, if you need any help let me know!

[Frobisher]

I'm having trouble connecting with minerd, does anyone know the proper command prompt format to use with this? 

[rippy]

I'm having trouble connecting with minerd, does anyone know the proper command prompt format to use with this?  

personally never used minerd but i think its something along the lines of minerd.exe -o http://192.99.10.167:3333 -u Weblogin.Worker -p Worker password

so if the username you used to signup was frobisher and you setup a worker with the name as 1 and password as x then it would look like:

minerd.exe -o http://192.99.10.167:3333 -u frobisher.1 -p x

do you have a sample config you use for minerd? could help you if you post it up.

[UrsaMajorisBeta]

why can't i register? It says token has expired :c

[verbal]

why can't i register? It says token has expired :c

i just tried mine again when i got that and worked fine

[rippy]

why can't i register? It says token has expired :c

just re register, that shouldn't be happening with new MPOS as apparently they increased the token time to 1 hour but seems like its still occurring will look into.

[Frobisher]

I'm having trouble connecting with minerd, does anyone know the proper command prompt format to use with this? 

personally never used minerd but i think its something along the lines of minerd.exe -o http://192.99.10.167:3333 -u Weblogin.Worker -p Worker password

so if the username you used to signup was frobisher and you setup a worker with the name as 1 and password as x then it would look like:

minerd.exe -o http://192.99.10.167:3333 -u frobisher.1 -p x

do you have a sample config you use for minerd? could help you if you post it up.

The script I was using was based off the one I use for steadyminer:

minerd --scrypt -o stratum+tcp://192.99.10.167:3333 -u Frobisher.nyan -p ******

soo... looks like i shouldn't use scrypt and I might be good to go.

edit: tried it without the --scrypt and it started to work but kept returning "Stratum authentication failed"

[Frobisher]

I don't know much about mining programs in general so sorry, I don't even know what -o or --scrypt even mean. I am a n00b.

[rippy]

I'm having trouble connecting with minerd, does anyone know the proper command prompt format to use with this?  

personally never used minerd but i think its something along the lines of minerd.exe -o http://192.99.10.167:3333 -u Weblogin.Worker -p Worker password

so if the username you used to signup was frobisher and you setup a worker with the name as 1 and password as x then it would look like:

minerd.exe -o http://192.99.10.167:3333 -u frobisher.1 -p x

do you have a sample config you use for minerd? could help you if you post it up.

The script I was using was based off the one I use for steadyminer:

minerd --scrypt -o stratum+tcp://192.99.10.167:3333 -u Frobisher.nyan -p ******

soo... looks like i shouldn't use scrypt and I might be good to go.

edit: tried it without the --scrypt and it started to work but kept returning "Stratum authentication failed"

try this in the batch file:
minerd --url=stratum+tcp://nyanpool.net:3333 --userpass=Frobisher.nyan:password

change password to your password so if your password is xxx then it will look like

minerd --url=stratum+tcp://nyanpool.net:3333 --userpass=Frobisher.nyan:xxx

[dimitriyremerov]

It seems your pool has more than 50% of network hashrate. Wel all know it's bad. You should consider to close registrations for a while until it's spreaded? You know that you will be helping the community this way.

[rippy]

It seems your pool has more than 50% of network hashrate. Wel all know it's bad. You should consider to close registrations for a while until it's spreaded? You know that you will be helping the community this way.

It's been disabled and linked to the other pool.

[14aristokrat]

Overview NYAN/USD: 21.11000000

I can not understand what it means from this figure if not a secret on what exchange price for this Nyan.

I do not speak much English, I come from Ukraine.

I would appreciate an answer to my question.

[rippy]

Overview NYAN/USD: 21.11000000

I can not understand what it means from this figure if not a secret on what exchange price for this Nyan.

I do not speak much English, I come from Ukraine.

I would appreciate an answer to my question.

The USD figure isn't accurate it's just the default setting so ignore it.

[Simcom]

Bump - this pool is rock solid I recommend it!