== Limitless - VIP = Your VIP Lifestyle and entertainment agency! ==

[pedemaann]

need pool  

[bitwho]

why?

are you going to stick around once difficulty hits 1. this is a 3 minute a block coin. not gonna be mineable easy. there is tons of other coins out there. what does this offer ?

with out anything speacial i dont think there will be a lot of hash power supporting this. only now , because difficulty is easy and you might have  chanage. but then.. smell ya later

[0btc]

I set up a p2pool node (patch) at http://tittiecoin.p2p.0x0a.nl:28008 (0.9% fee). The DNS is fresh as well so you might want to use the IP version http://149.210.168.71:28008 (as long as the URL works in the browser, it's good). I'd appreciate it if someone were to vet the patch values and perhaps strengthen the network by setting up another node

[andrew2085]

Testing my pool with 1.8Mh/s, got a block in 10 first minutes.
Btw i failed with dns, i needed to re-do the record so the pool should be reachable in around 2 hours from now
http://ttc.incoinswetrust.com

those who don't want to wait for the DNS to spread can add this entry to their host file :
95.130.9.118  ttc.incoinswetrust.com

and access the pool now

It took me about about 100 times of me hitting F5 before I thought of that  

[Yanoflies]

I can't get the solo mining to work ... can't connect to the local server ...

[Gcr0n]

I can't get the solo mining to work ... can't connect to the local server ...

did you try pressing the power button?

[campeck]

I can't get the solo mining to work ... can't connect to the local server ...

This is my tittiecoin.conf that is working solo

rpcuser=titan
rpcpassword=tit
rpcport=8008
server=1
addnode=86.1.252.20
addnode=14.202.86.250
addnode=98.154.27.203
rpcallowip=192.168.1.*

Then in the .bat
--scrypt -o 192.168.1.64:8008 -u titan -p tit

(I am pointing my rig via LAN to my wallet holding PC. otherwise I believe you use 127.0.0.1 for both places I put an ip)

[Acidyo]

I set up a p2pool node (patch) at http://tittiecoin.p2p.0x0a.nl:28008 (0.9% fee). The DNS is fresh as well so you might want to use the IP version http://149.210.168.71:28008 (as long as the URL works in the browser, it's good). I'd appreciate it if someone were to vet the patch values and perhaps strengthen the network by setting up another node

Got minerd working, could you tell me how I set it up on cudaminer? it won't work with just the address in there.

[Acidyo]

Testing my pool with 1.8Mh/s, got a block in 10 first minutes.
Btw i failed with dns, i needed to re-do the record so the pool should be reachable in around 2 hours from now
http://ttc.incoinswetrust.com

those who don't want to wait for the DNS to spread can add this entry to their host file :
95.130.9.118  ttc.incoinswetrust.com

and access the pool now

what do you mean with adding 95.130.9.118 to your host file? How does one do that?

[afulton2013]

im a noob what would i put as the server in the ttitiecoin client?

[0btc]

I set up a p2pool node (patch) at http://tittiecoin.p2p.0x0a.nl:28008 (0.9% fee). The DNS is fresh as well so you might want to use the IP version http://149.210.168.71:28008 (as long as the URL works in the browser, it's good). I'd appreciate it if someone were to vet the patch values and perhaps strengthen the network by setting up another node

Got minerd working, could you tell me how I set it up on cudaminer? it won't work with just the address in there.

This is the cudaminer line I'm using:

Code:

./cudaminer -a scrypt -o http://tittiecoin.p2p.0x0a.nl:28008 -u TJcR1Pr1naER4eDnm1RgviMrHj3AJBwhCg

Alternatively, with the IP:

Code:

./cudaminer -a scrypt -o http://149.210.168.71:28008 -u TJcR1Pr1naER4eDnm1RgviMrHj3AJBwhCg

[Gcr0n]

finally i'm getting titties..

bbl i'm getting my fapcoin on

[Acidyo]

I set up a p2pool node (patch) at http://tittiecoin.p2p.0x0a.nl:28008 (0.9% fee). The DNS is fresh as well so you might want to use the IP version http://149.210.168.71:28008 (as long as the URL works in the browser, it's good). I'd appreciate it if someone were to vet the patch values and perhaps strengthen the network by setting up another node

Got minerd working, could you tell me how I set it up on cudaminer? it won't work with just the address in there.

This is the cudaminer line I'm using:

Code:

./cudaminer -a scrypt -o http://tittiecoin.p2p.0x0a.nl:28008 -u TJcR1Pr1naER4eDnm1RgviMrHj3AJBwhCg

Alternatively, with the IP:

Code:

./cudaminer -a scrypt -o http://149.210.168.71:28008 -u TJcR1Pr1naER4eDnm1RgviMrHj3AJBwhCg

Thanks! Never used it with p2pool before!

[InCoinsWeTrust]

Testing my pool with 1.8Mh/s, got a block in 10 first minutes.
Btw i failed with dns, i needed to re-do the record so the pool should be reachable in around 2 hours from now
http://ttc.incoinswetrust.com

those who don't want to wait for the DNS to spread can add this entry to their host file :
95.130.9.118  ttc.incoinswetrust.com

and access the pool now

what do you mean with adding 95.130.9.118 to your host file? How does one do that?

On windows go on C:\Windows\System32\drivers\etc and edit the "hosts" file
add this line to the file :
95.130.9.118  ttc.incoinswetrust.com

and save it. Make sure you overwrite the original and it's named "hosts" no txt extension at the end

after doing this you should be able to reach the website by typing http://ttc.incoinswetrust.com in your browser

[PyroTekNeks]

Ahhh. I is locked out. WTF.

[opusdigitus]

I can't get the solo mining to work ... can't connect to the local server ...

This is my tittiecoin.conf that is working solo

rpcuser=titan
rpcpassword=tit
rpcport=8008
server=1
addnode=86.1.252.20
addnode=14.202.86.250
addnode=98.154.27.203
rpcallowip=192.168.1.*

Then in the .bat
--scrypt -o 192.168.1.64:8008 -u titan -p tit

(I am pointing my rig via LAN to my wallet holding PC. otherwise I believe you use 127.0.0.1 for both places I put an ip)

I entered the 127.0.0.1 in both the .conf file and the cgminer command line but I keep getting the error:  "Pool 0 slow/down or URL or credentials invalid"  

Any ideas?  My username and password are correct as well.

[incorrect]

LONGPOLL, huh? 

TAvUBqLmnGXxRWiQYfBYbjtKspRGTsLpZa

[Shadey]

Got my first set of Titties!!!

TJPBkK9ywhXorwPduedGLyQ1xUsaaHLrdj

[InCoinsWeTrust]

Huh i rebooted the server by mistake  The pool will be up again in 5 mins

[afulton2013]

sent you a email cause im a noob,

using the client to pool mine with your ppol,

what do i put in server? the stratum stuff dont work i get http://prntscr.com/2nj9nh