50Ksol/s 620W, Innosilicon announces World Best Equihash Miner A9 ZMaster

[KaydenC]

I am not regretting my Z9 Mini purchase, mine runs at 750mhz with ZERO HW errors and chip temps are 65 across the board, if only someone would do a custom firmware and unlock the higher frequencies and voltages, ADD a rear FAN and this could turn this into a monster....

My X3 that I did the same thing to would run at 330kH and stay at 65 across the board.

So I paid $100 1kH which is what Innosilicon is charging and you have to spend 10k

I got the z9 mini too, but innosilicon clearly has the better deal if we look at fiat.

$10k for 2 units or 100k sols (more like 120k, as they can do 60k each from screenshots). The Z9 mini is $2k for 16.5k sols, or $10k for 82.5k sols with poorer efficiency. But my Z9 is paid with btc at $9.3k, so that feels good.

[cod3gen]

Guide to setup profit switching in Awesome Miner for A9`s.

https://bitcointalk.org/index.php?topic=4547429

[nadeaup]

Did anyone figure out the id/pw to ssh into the Innosilicon A9?

[Inno_ASIC]

Last promotion day reminder!

Dear customers,

A gentle reminder this is the last day for limited A9 Zmaster buy one get one free Promotion. Do not miss the promotional gift (free A9 gift sent out before July 5th). Price will go back right up in 24 hours. Seize the best opportunity to enjoy best period of mining zcash with little competition. http://www.innosilicon.com/html/a9-miner/index.html

[SeriousOne]

Did anyone figure out the id/pw to ssh into the Innosilicon A9?

Just use some IP Scanner, or look in to the admin panel of your router.
There you will see the IP of your A9, just put that in to the adressbar of your browser.

Then it pops up login panel, there you just put:
Username: Admin
Password: Admin

Then you are in the Panel, there you have to chose your pool and you are up and running!

[vincl]

Did anyone figure out the id/pw to ssh into the Innosilicon A9?

Just use some IP Scanner, or look in to the admin panel of your router.
There you will see the IP of your A9, just put that in to the adressbar of your browser.

Then it pops up login panel, there you just put:
Username: Admin
Password: Admin

Then you are in the Panel, there you have to chose your pool and you are up and running!

he asked for SSH access, not webinterface

[cod3gen]

he asked for SSH access, not webinterface

Have you tried root / innot1t2 ?

[cod3gen]

Have any one here tried theyre A9 on Powermining.pw pool? Interested in knowing if you are experiencing any rejected shares and if you are getting your advertised hashrate.

[swogerino]

A lot of home miners I see have switched from Zcash to something else, I also have done this. There is a bad history of ASICS of very few of them managing to ROI, and this is priced very high for a speculative market like the crypto is.

What is expected longevity that you will be in profit with this device ? What if Zec developers decide to fork and to make this a total worthless investment right after 1 or 2 months from the day the person receives it ? To many questions surrounding ASICS miners and sorry but to many idiots buying them too and trying to go for a centralisation, as that is what ASICS miner do centralisation for a relatively small amount of time. I would never buy one.

[gauldicus]

Anyone that buys this wants their head testing, innosillicon are laughing all the way to the bank, this wont even break even with free electricity

[MagicSmoker]

I got the z9 mini too, but innosilicon clearly has the better deal if we look at fiat.

$10k for 2 units or 100k sols (more like 120k, as they can do 60k each from screenshots). The Z9 mini is $2k for 16.5k sols, or $10k for 82.5k sols with poorer efficiency. But my Z9 is paid with btc at $9.3k, so that feels good.

A lot of people are reporting rather high reject rates on the A9 - to the tune of around 30% - and since you don't get paid for bad shares, the A9 isn't quite as powerful as it claims.

Basically, it looks like the price/hash is roughly the same for both of them.

[yrk1957]

I got the z9 mini too, but innosilicon clearly has the better deal if we look at fiat.

$10k for 2 units or 100k sols (more like 120k, as they can do 60k each from screenshots). The Z9 mini is $2k for 16.5k sols, or $10k for 82.5k sols with poorer efficiency. But my Z9 is paid with btc at $9.3k, so that feels good.

A lot of people are reporting rather high reject rates on the A9 - to the tune of around 30% - and since you don't get paid for bad shares, the A9 isn't quite as powerful as it claims.

Basically, it looks like the price/hash is roughly the same for both of them.

Hence the buy one get one free promotion. And seems people have got the message and are staying away.

Next stop, my guess, buy one get two free...

[serhanni]

I got the z9 mini too, but innosilicon clearly has the better deal if we look at fiat.

$10k for 2 units or 100k sols (more like 120k, as they can do 60k each from screenshots). The Z9 mini is $2k for 16.5k sols, or $10k for 82.5k sols with poorer efficiency. But my Z9 is paid with btc at $9.3k, so that feels good.

A lot of people are reporting rather high reject rates on the A9 - to the tune of around 30% - and since you don't get paid for bad shares, the A9 isn't quite as powerful as it claims.

Basically, it looks like the price/hash is roughly the same for both of them.

Hence the buy one get one free promotion. And seems people have got the message and are staying away.

Next stop, my guess, buy one get two free...

Yeah, like baikal's promotion after monero announced the fork for fighting asics. Baikal said "buy one get 5 for free"

[SeriousOne]

We got 3 pieces now, and they worked all well.

But now after transport&network change one won't work anymore, it is looping at "tunning".
Sometime later it just restart also.

Here are some logs:

Code:

Jan 28 15:58:18 InnoMiner kernel: Booting Linux on physical CPU 0x0
Jan 28 15:58:18 InnoMiner kernel: Linux version 4.14.0-xilinx (yex@localhost.localdomain) (gcc version 6.4.0 (Buildroot 2018.02.1)) #1 SMP PREEMPT Sat Jun 9 09:42:21 CST 2018
Jan 28 15:58:18 InnoMiner kernel: CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
Jan 28 15:58:18 InnoMiner kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan 28 15:58:18 InnoMiner kernel: OF: fdt: Machine model: xlnx,zynq-7000
Jan 28 15:58:18 InnoMiner kernel: Memory policy: Data cache writealloc
Jan 28 15:58:18 InnoMiner kernel: cma: Reserved 16 MiB at 0x0f000000
Jan 28 15:58:18 InnoMiner kernel: On node 0 totalpages: 65536
Jan 28 15:58:18 InnoMiner kernel: free_area_init_node: node 0, pgdat c0a3b940, node_mem_map cedf0000
Jan 28 15:58:18 InnoMiner kernel: Normal zone: 512 pages used for memmap
Jan 28 15:58:18 InnoMiner kernel: Normal zone: 0 pages reserved
Jan 28 15:58:18 InnoMiner kernel: Normal zone: 65536 pages, LIFO batch:15
Jan 28 15:58:18 InnoMiner kernel: random: fast init done
Jan 28 15:58:18 InnoMiner kernel: percpu: Embedded 16 pages/cpu @cedc7000 s35276 r8192 d22068 u65536
Jan 28 15:58:18 InnoMiner kernel: pcpu-alloc: s35276 r8192 d22068 u65536 alloc=16*4096
Jan 28 15:58:18 InnoMiner kernel: pcpu-alloc: [0] 0 [0] 1
Jan 28 15:58:18 InnoMiner kernel: Built 1 zonelists, mobility grouping on. Total pages: 65024
n 28 15:58:18 InnoMiner kernel: Kernel command line: console=ttyPS0,115200 noinitrd root=ubi0:rootfs ro ubi.mtd=8 earlyprintk rootfstype=ubifs rootwait
Jan 28 15:58:18 InnoMiner kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
Jan 28 15:58:18 InnoMiner kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 28 15:58:18 InnoMiner kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 28 15:58:18 InnoMiner kernel: Memory: 233156K/262144K available (6144K kernel code, 241K rwdata, 1612K rodata, 1024K init, 156K bss, 12604K reserved, 16384K cma-reserved, 0K highmem)
Jan 28 15:58:18 InnoMiner kernel: Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0700000 (7136 kB)
.init : 0xc0900000 - 0xc0a00000 (1024 kB)
.data : 0xc0a00000 - 0xc0a3c540 ( 242 kB)
.bss : 0xc0a3c540 - 0xc0a63804 ( 157 kB)
Jan 28 15:58:18 InnoMiner kernel: Preemptible hierarchical RCU implementation.
Jan 28 15:58:18 InnoMiner kernel: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Jan 28 15:58:18 InnoMiner kernel: Tasks RCU enabled.
Jan 28 15:58:18 InnoMiner kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Jan 28 15:58:18 InnoMiner kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jan 28 15:58:18 InnoMiner kernel: efuse mapped to d0800000
Jan 28 15:58:18 InnoMiner kernel: slcr mapped to d0802000
Jan 28 15:58:18 InnoMiner kernel: L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
Jan 28 15:58:18 InnoMiner kernel: L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
Jan 28 15:58:18 InnoMiner kernel: L2C-310 erratum 769419 enabled
Jan 28 15:58:18 InnoMiner kernel: L2C-310 enabling early BRESP for Cortex-A9
Jan 28 15:58:18 InnoMiner kernel: L2C-310 full line of zeros enabled for Cortex-A9
Jan 28 15:58:18 InnoMiner kernel: L2C-310 ID prefetch enabled, offset 1 lines
Jan 28 15:58:18 InnoMiner kernel: L2C-310 dynamic clock gating enabled, standby mode enabled
Jan 28 15:58:18 InnoMiner kernel: L2C-310 cache controller enabled, 8 ways, 512 kB
Jan 28 15:58:18 InnoMiner kernel: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
Jan 28 15:58:18 InnoMiner kernel: zynq_clock_init: clkc starts at d0802100
Jan 28 15:58:18 InnoMiner kernel: Zynq clock init
Jan 28 15:58:18 InnoMiner kernel: sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
Jan 28 15:58:18 InnoMiner kernel: clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Jan 28 15:58:18 InnoMiner kernel: Switching to timer-based delay loop, resolution 3ns
Jan 28 15:58:18 InnoMiner kernel: clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
Jan 28 15:58:18 InnoMiner kernel: timer #0 at d080a000, irq=17
Jan 28 15:58:18 InnoMiner kernel: Console: colour dummy device 80x30
Jan 28 15:58:18 InnoMiner kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=333333)
Jan 28 15:58:18 InnoMiner kernel: pid_max: default: 32768 minimum: 301
Jan 28 15:58:18 InnoMiner kernel: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 28 15:58:18 InnoMiner kernel: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 28 15:58:18 InnoMiner kernel: CPU: Testing write buffer coherency: ok
Jan 28 15:58:18 InnoMiner kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan 28 15:58:18 InnoMiner kernel: Setting up static identity map for 0x100000 - 0x100060
Jan 28 15:58:18 InnoMiner kernel: Hierarchical SRCU implementation.
Jan 28 15:58:18 InnoMiner kernel: smp: Bringing up secondary CPUs ...
Jan 28 15:58:18 InnoMiner kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan 28 15:58:18 InnoMiner kernel: smp: Brought up 1 node, 2 CPUs
Jan 28 15:58:18 InnoMiner kernel: SMP: Total of 2 processors activated (1333.33 BogoMIPS).
Jan 28 15:58:18 InnoMiner kernel: CPU: All CPU(s) started in SVC mode.
Jan 28 15:58:18 InnoMiner kernel: devtmpfs: initialized
Jan 28 15:58:18 InnoMiner kernel: VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Jan 28 15:58:18 InnoMiner kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
Jan 28 15:58:18 InnoMiner kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
Jan 28 15:58:18 InnoMiner kernel: pinctrl core: initialized pinctrl subsystem
Jan 28 15:58:18 InnoMiner kernel: NET: Registered protocol family 16
Jan 28 15:58:18 InnoMiner kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Jan 28 15:58:18 InnoMiner kernel: cpuidle: using governor menu
Jan 28 15:58:18 InnoMiner kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
Jan 28 15:58:18 InnoMiner kernel: hw-breakpoint: maximum watchpoint size is 4 bytes.
oMiner kernel: zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xd0840000
Jan 28 15:58:18 InnoMiner kernel: zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
Jan 28 15:58:18 InnoMiner kernel: e0000000.serial: ttyPS1 at MMIO 0xe0000000 (irq = 26, base_baud = 6249999) is a xuartps
Jan 28 15:58:18 InnoMiner kernel: e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 27, base_baud = 6249999) is a xuartps
Jan 28 15:58:18 InnoMiner kernel: console [ttyPS0] enabled
Jan 28 15:58:18 InnoMiner kernel: vgaarb: loaded
Jan 28 15:58:18 InnoMiner kernel: SCSI subsystem initialized
Jan 28 15:58:18 InnoMiner kernel: usbcore: registered new interface driver usbfs
Jan 28 15:58:18 InnoMiner kernel: usbcore: registered new interface driver hub
Jan 28 15:58:18 InnoMiner kernel: usbcore: registered new device driver usb
Jan 28 15:58:18 InnoMiner kernel: media: Linux media interface: v0.10
Jan 28 15:58:18 InnoMiner kernel: Linux video capture interface: v2.00
Jan 28 15:58:18 InnoMiner kernel: pps_core: LinuxPPS API ver. 1 registered
Jan 28 15:58:18 InnoMiner kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
ered
Jan 28 15:58:18 InnoMiner kernel: EDAC MC: Ver: 3.0.0
Jan 28 15:58:18 InnoMiner kernel: FPGA manager framework
Jan 28 15:58:18 InnoMiner kernel: fpga-region fpga-full: FPGA Region probed
Jan 28 15:58:18 InnoMiner kernel: Advanced Linux Sound Architecture Driver Initialized.
Jan 28 15:58:18 InnoMiner kernel: clocksource: Switched to clocksource arm_global_timer
Jan 28 15:58:18 InnoMiner kernel: NET: Registered protocol family 2
Jan 28 15:58:18 InnoMiner kernel: TCP established hash table entries: 2048 (order: 1, 8192 bytes)
Jan 28 15:58:18 InnoMiner kernel: TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
Jan 28 15:58:18 InnoMiner kernel: TCP: Hash tables configured (established 2048 bind 2048)
Jan 28 15:58:18 InnoMiner kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan 28 15:58:18 InnoMiner kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan 28 15:58:18 InnoMiner kernel: NET: Registered protocol family 1
Jan 28 15:58:18 InnoMiner kernel: RPC: Registered named UNIX socket transport module.
Jan 28 15:58:18 InnoMiner kernel: RPC: Registered udp transport module.
Jan 28 15:58:18 InnoMiner kernel: RPC: Registered tcp transport module.
Jan 28 15:58:18 InnoMiner kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 28 15:58:18 InnoMiner kernel: PCI: CLS 0 bytes, default 64
Jan 28 15:58:18 InnoMiner kernel: hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
Jan 28 15:58:18 InnoMiner kernel: hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
Jan 28 15:58:18 InnoMiner kernel: workingset: timestamp_bits=30 max_order=16 bucket_order=0
Jan 28 15:58:18 InnoMiner kernel: jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
Jan 28 15:58:18 InnoMiner kernel: io scheduler noop registered
Jan 28 15:58:18 InnoMiner kernel: io scheduler deadline registered
Jan 28 15:58:18 InnoMiner kernel: io scheduler cfq registered (default)
Jan 28 15:58:18 InnoMiner kernel: io scheduler mq-deadline registered
Jan 28 15:58:18 InnoMiner kernel: io scheduler kyber registered
Jan 28 15:58:18 InnoMiner kernel: dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
Jan 28 15:58:18 InnoMiner kernel: dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
Jan 28 15:58:18 InnoMiner kernel: brd: module loaded
Jan 28 15:58:18 InnoMiner kernel: loop: module loaded
Jan 28 15:58:18 InnoMiner kernel: libphy: Fixed MDIO Bus: probed
Jan 28 15:58:18 InnoMiner kernel: CAN device driver interface
Jan 28 15:58:18 InnoMiner kernel: libphy: MACB_mii_bus: probed
Jan 28 15:58:18 InnoMiner kernel: macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 29 (a0:b0:45:02:b5:fb)
Jan 28 15:58:18 InnoMiner kernel: RTL8211E Gigabit Ethernet e000b000.ethernet-ffffffff:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=e000b000.ethernet-ffffffff:00, irq=POLL)
Jan 28 15:58:18 InnoMiner kernel: e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
Jan 28 15:58:18 InnoMiner kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Jan 28 15:58:18 InnoMiner kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 28 15:58:18 InnoMiner kernel: ehci-pci: EHCI PCI platform driver
Jan 28 15:58:18 InnoMiner kernel: usbcore: registered new interface driver usb-storage
Jan 28 15:58:18 InnoMiner kernel: i2c /dev entries driver
Jan 28 15:58:18 InnoMiner kernel: cdns-i2c e0004000.i2c: 100 kHz mmio e0004000 irq 23
Jan 28 15:58:18 InnoMiner kernel: IR NEC protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR RC5(x/sz) protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR RC6 protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR JVC protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR Sony protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR SANYO protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR Sharp protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR MCE Keyboard/mouse protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: IR XMP protocol handler initialized
Jan 28 15:58:18 InnoMiner kernel: cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer at d0946000 with timeout 10s
Jan 28 15:58:18 InnoMiner kernel: EDAC MC: ECC not enabled
Jan 28 15:58:18 InnoMiner kernel: Xilinx Zynq CpuIdle Driver started
Jan 28 15:58:18 InnoMiner kernel: sdhci: Secure Digital Host Controller Interface driver
Jan 28 15:58:18 InnoMiner kernel: sdhci: Copyright(c) Pierre Ossman
Jan 28 15:58:18 InnoMiner kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Jan 28 15:58:18 InnoMiner kernel: mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA
Jan 28 15:58:18 InnoMiner kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jan 28 15:58:18 InnoMiner kernel: usbcore: registered new interface driver usbhid
Jan 28 15:58:18 InnoMiner kernel: usbhid: USB HID core driver
Jan 28 15:58:18 InnoMiner kernel: nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
Jan 28 15:58:18 InnoMiner kernel: nand: Micron MT29F2G08ABAEAWP
Jan 28 15:58:18 InnoMiner kernel: nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Jan 28 15:58:18 InnoMiner kernel: nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Jan 28 15:58:18 InnoMiner kernel: Bad block table found at page 131008, version 0x01
Jan 28 15:58:18 InnoMiner kernel: Bad block table found at page 130944, version 0x01
Jan 28 15:58:18 InnoMiner kernel: 11 ofpart partitions found on MTD device pl35x-nand
Jan 28 15:58:18 InnoMiner kernel: Creating 11 MTD partitions on "pl35x-nand":
Jan 28 15:58:18 InnoMiner kernel: 0x000000000000-0x000000400000 : "bootloader"
Jan 28 15:58:18 InnoMiner kernel: 0x000000400000-0x000000480000 : "env"
Jan 28 15:58:18 InnoMiner kernel: 0x000000480000-0x000000500000 : "dtb-main"
Jan 28 15:58:18 InnoMiner kernel: 0x000000500000-0x000000580000 : "dtb-alt"
Jan 28 15:58:18 InnoMiner kernel: 0x000000580000-0x000000980000 : "fpga-main"
Jan 28 15:58:18 InnoMiner kernel: 0x000000980000-0x000000d80000 : "fpga-alt"
Jan 28 15:58:18 InnoMiner kernel: 0x000000d80000-0x000001280000 : "kernel-main"
Jan 28 15:58:18 InnoMiner kernel: 0x000001280000-0x000001780000 : "kernel-alt"
Jan 28 15:58:18 InnoMiner kernel: 0x000001780000-0x0000074c0000 : "rootfs-main"
Jan 28 15:58:18 InnoMiner kernel: 0x0000074c0000-0x00000d200000 : "rootfs-alt"
Jan 28 15:58:18 InnoMiner kernel: 0x00000d200000-0x00000dc00000 : "config"
Jan 28 15:58:18 InnoMiner kernel: fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
Jan 28 15:58:18 InnoMiner kernel: NET: Registered protocol family 10
Jan 28 15:58:18 InnoMiner kernel: Segment Routing with IPv6
Jan 28 15:58:18 InnoMiner kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Jan 28 15:58:18 InnoMiner kernel: NET: Registered protocol family 17
Jan 28 15:58:18 InnoMiner kernel: can: controller area network core (rev 20170425 abi 9)
Jan 28 15:58:18 InnoMiner kernel: NET: Registered protocol family 29
Jan 28 15:58:18 InnoMiner kernel: can: raw protocol (rev 20170425)
Jan 28 15:58:18 InnoMiner kernel: can: broadcast manager protocol (rev 20170425 t)
Jan 28 15:58:18 InnoMiner kernel: can: netlink gateway (rev 20170425) max_hops=1
Jan 28 15:58:18 InnoMiner kernel: Registering SWP/SWPB emulation handler
Jan 28 15:58:18 InnoMiner kernel: ubi0: attaching mtd8
Jan 28 15:58:18 InnoMiner kernel: ubi0: scanning is finished
Jan 28 15:58:18 InnoMiner kernel: ubi0: attached mtd8 (name "rootfs-main", size 93 MiB)
Jan 28 15:58:18 InnoMiner kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Jan 28 15:58:18 InnoMiner kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Jan 28 15:58:18 InnoMiner kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Jan 28 15:58:18 InnoMiner kernel: ubi0: good PEBs: 746, bad PEBs: 0, corrupted PEBs: 0
Jan 28 15:58:18 InnoMiner kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
Jan 28 15:58:18 InnoMiner kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1752358700
Jan 28 15:58:18 InnoMiner kernel: ubi0: available PEBs: 0, total reserved PEBs: 746, PEBs reserved for bad PEB handling: 40
Jan 28 15:58:18 InnoMiner kernel: ubi0: background thread "ubi_bgt0d" started, PID 729
Jan 28 15:58:18 InnoMiner kernel: hctosys: unable to open rtc device (rtc0)
Jan 28 15:58:18 InnoMiner kernel: of_cfs_init
Jan 28 15:58:18 InnoMiner kernel: of_cfs_init: OK
Jan 28 15:58:18 InnoMiner kernel: ALSA device list:
Jan 28 15:58:18 InnoMiner kernel: No soundcards found.
Jan 28 15:58:18 InnoMiner kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
Jan 28 15:58:18 InnoMiner kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Jan 28 15:58:18 InnoMiner kernel: UBIFS (ubi0:0): FS size: 87740416 bytes (83 MiB, 691 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
Jan 28 15:58:18 InnoMiner kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
Jan 28 15:58:18 InnoMiner kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 5A1BAB54-0036-4152-B314-61D156E3B135, small LPT model
Jan 28 15:58:18 InnoMiner kernel: VFS: Mounted root (ubifs filesystem) readonly on device 0:12.
Jan 28 15:58:18 InnoMiner kernel: devtmpfs: mounted
Jan 28 15:58:18 InnoMiner kernel: Freeing unused kernel memory: 1024K
Jan 28 15:58:18 InnoMiner systemd[1]: System time before build time, advancing clock.
Jan 28 15:58:18 InnoMiner systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ +LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
Jan 28 15:58:18 InnoMiner systemd[1]: Detected architecture arm.
Jan 28 15:58:18 InnoMiner systemd[1]: Set hostname to <InnoMiner>.
Jan 28 15:58:18 InnoMiner systemd[1]: Initializing machine ID from random generator.
Jan 28 15:58:18 InnoMiner systemd[1]: Installed transient /etc/machine-id file.
Jan 28 15:58:18 InnoMiner systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
Jan 28 15:58:18 InnoMiner systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
Jan 28 15:58:18 InnoMiner systemd[1]: Created slice System Slice.
Jan 28 15:58:18 InnoMiner systemd[1]: Listening on udev Kernel Socket.
Jan 28 15:58:18 InnoMiner systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Jan 28 15:58:18 InnoMiner systemd-journald[747]: Journal started
Jan 28 15:58:18 InnoMiner systemd-journald[747]: Runtime journal (/run/log/journal/9163954dcfdc48bd91b3c0124f184884) is 640.0K, max 5.0M, 4.3M free.
Jan 28 15:58:18 InnoMiner systemd-sysctl[740]: Couldn't write '16' to 'kernel/sysrq', ignoring: No such file or directory
Jan 28 15:58:18 InnoMiner systemd-sysctl[740]: Couldn't write 'fq_codel' to 'net/core/default_qdisc', ignoring: No such file or directory
Jan 28 15:58:18 InnoMiner systemd[1]: Starting Flush Journal to Persistent Storage...
Jan 28 15:58:18 InnoMiner systemd[1]: Started udev Kernel Device Manager.
Jan 28 15:58:18 InnoMiner systemd[1]: Started Rebuild Journal Catalog.
Jan 28 15:58:18 InnoMiner systemd[1]: Started udev Coldplug all Devices.
Jan 28 15:58:18 InnoMiner systemd-journald[747]: Runtime journal (/run/log/journal/9163954dcfdc48bd91b3c0124f184884) is 640.0K, max 5.0M, 4.3M free.
Jan 28 15:58:18 InnoMiner systemd[1]: Starting Update is Completed...
Jan 28 15:58:18 InnoMiner systemd[1]: Starting Network Service...
Jan 28 15:58:18 InnoMiner systemd[1]: Started Flush Journal to Persistent Storage.
Jan 28 15:58:18 InnoMiner systemd[1]: Started Update is Completed.
Jan 28 15:58:18 InnoMiner systemd[1]: Starting Create Volatile Files and Directories...
Jan 28 15:58:18 InnoMiner systemd-tmpfiles[1251]: [/etc/tmpfiles.d/var-factory.conf:7] Duplicate line for path "/var/lib/systemd", ignoring.
Jan 28 15:58:18 InnoMiner systemd-tmpfiles[1251]: [/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path "/var/log", ignoring.
Jan 28 15:58:18 InnoMiner systemd-tmpfiles[1251]: [/usr/lib/tmpfiles.d/var.conf:21] Duplicate line for path "/var/lib", ignoring.
Jan 28 15:58:18 InnoMiner systemd-networkd[1249]: Enumeration completed
Jan 28 15:58:18 InnoMiner systemd[1]: Started Network Service.
Jan 28 15:58:19 InnoMiner systemd[1]: Found device /dev/ttyPS0.
Jan 28 15:58:19 InnoMiner systemd-udevd[980]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Jan 28 15:58:19 InnoMiner systemd-networkd[1249]: sit0: Link is not managed by us
Jan 28 15:58:19 InnoMiner systemd-networkd[1249]: lo: Link is not managed by us
Jan 28 15:58:19 InnoMiner systemd-networkd[1249]: eth0: IPv6 successfully enabled
Jan 28 15:58:19 InnoMiner kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 28 15:58:19 InnoMiner systemd-udevd[1257]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Jan 28 15:58:19 InnoMiner systemd-udevd[1253]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Jan 28 15:58:20 InnoMiner systemd[1]: Started Create Volatile Files and Directories.
Jan 28 15:58:20 InnoMiner systemd[1]: Starting Network Name Resolution...
Jan 28 15:58:20 InnoMiner systemd[1]: Starting Network Time Synchronization...

[SeriousOne]

Here more, it hangs usually at connecting to the pools.

https://pastebin.com/22RAKeQW

[MagicSmoker]

We got 3 pieces now, and they worked all well.

But now after transport&network change one won't work anymore, it is looping at "tunning".
Sometime later it just restart also.

Here are some logs:

Code:

...
Jan 28 15:58:18 InnoMiner kernel: nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Jan 28 15:58:18 InnoMiner kernel: Bad block table found at page 131008, version 0x01
Jan 28 15:58:18 InnoMiner kernel: Bad block table found at page 130944, version 0x01
...

I don't know the first thing about these miners, but these lines stuck out to me. Maybe check the startup logs from your working units to see if they report something similar.

[wKiV7378U]

Here more, it hangs usually at connecting to the pools.

https://pastebin.com/22RAKeQW

any updates on this issue and the ssh login stuff?

purchased one today and am trying to get all my ducks in a row

[SeriousOne]

Here more, it hangs usually at connecting to the pools.

https://pastebin.com/22RAKeQW

any updates on this issue and the ssh login stuff?

purchased one today and am trying to get all my ducks in a row

Yeah, we figured it out, it is some problem with 100fdx duplex.
I got really strange symptoms. It should be caused by the "stupid" switch.
So one friend took the fault device to his place, there it is plugged right away to the modem.
Since then it runs like 100% without nearly 0 rejection.

So if you use a switch you need one where you can switch manually 100fdx duplex.

Or you can try to force it with a twisted cable, this worked, but after i took the router of it didn't helped anymore even when i put the router back.

[cod3gen]

Here more, it hangs usually at connecting to the pools.

https://pastebin.com/22RAKeQW

any updates on this issue and the ssh login stuff?

purchased one today and am trying to get all my ducks in a row

Perhaps you should join Powermining.pw Pool where SeriousOne got all his help... ;-)

Join us on Discord; https://discord.gg/epFf8bF

[SeriousOne]

Yeah the discord chat of powermining.pw brought me most far by now. - https://discord.gg/epFf8bF
Thanks guys!

But it still accrues, the one got "fixed" by taking it out and plug it single in to a modem somewhere else.

Now it seems like a second one got "infected".

So i will watch out for a Switch witch can force 100fdx, is my last hope by now.


EDIT: Ok updating netowork settings kinda helped now for now, by pressing just update.