Mathero11
Jr. Member
Offline
Activity: 36
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2018, 02:34:16 PM |
|
lc power platinum series 1200w
6x RX 580s (185W x 6) is an overload for a 1,200W PSU. Even though that model has 100A on its +12v rail, it is still at its peak with a 1110W load ( only have 90W window). Since you're mining Ethereum, it's alright to underclock to lower the power consumption, or use only 5 GPUs for now. And this bugs me: " my friend has two rigs with 2 x 6 RX 580 sapphire nitro 8gb" Two rigs with 2x6 RX580, means 12GPU in each rig? No, right? so 6GPUs each. The error is pretty normal and shouldn't cause a reboot, both of the rigs seems out of juice that can trigger a shutdown but your BIOS was set to restart whenever the system was abruptly powered down. I have also 6x rx 580 running on a 1000W psu lol now mining for 180h straight
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
drale (OP)
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2018, 07:15:19 PM |
|
I have new information.
It is not problem with risers at all. When I unplug any GPU, rig works perfect. So rig works perfect with 5 GPUs. Perhaps problem is with voltage or something else.
What should I do?
|
|
|
|
OhHaiAndy
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2018, 09:59:30 PM |
|
I have new information.
It is not problem with risers at all. When I unplug any GPU, rig works perfect. So rig works perfect with 5 GPUs. Perhaps problem is with voltage or something else.
What should I do?
Every time I have had issues like this it was due to using an insufficient PSU. You can get a very inexpsensive 500-750w PSU + a dual PSU connector and give that a shot. Likely will get you running.
|
|
|
|
drale (OP)
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2018, 10:28:08 PM |
|
I have new information.
It is not problem with risers at all. When I unplug any GPU, rig works perfect. So rig works perfect with 5 GPUs. Perhaps problem is with voltage or something else.
What should I do?
Every time I have had issues like this it was due to using an insufficient PSU. You can get a very inexpsensive 500-750w PSU + a dual PSU connector and give that a shot. Likely will get you running. Is it possible? Rig was working perfectly more than 6 months with same PSU. That PSU is on rig right now, no changes.
|
|
|
|
OhHaiAndy
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2018, 11:39:35 PM |
|
I have new information.
It is not problem with risers at all. When I unplug any GPU, rig works perfect. So rig works perfect with 5 GPUs. Perhaps problem is with voltage or something else.
What should I do?
Every time I have had issues like this it was due to using an insufficient PSU. You can get a very inexpsensive 500-750w PSU + a dual PSU connector and give that a shot. Likely will get you running. Is it possible? Rig was working perfectly more than 6 months with same PSU. That PSU is on rig right now, no changes. If they are running at full power, then that's right at the max capacity for a 1200w PSU. If they are running at lower wattage, then it should be fine. Have you swapped the PSU out with another 1200w and tried that? I have had rigs with reboot issues because of insufficient PSUs and I've had reboot issues because the PSU was dying. If the issue isn't the riser, but removing a GPU and it's load from the system makes the rig stable, it sounds like a power issue to me, but of course there are lots of possibilities and variables.
|
|
|
|
leonix007
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1008
Merit: 297
Grow with community
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 01:52:08 AM |
|
I have new information.
It is not problem with risers at all. When I unplug any GPU, rig works perfect. So rig works perfect with 5 GPUs. Perhaps problem is with voltage or something else.
What should I do?
Well, Congrats, you already pointed out the culprit what to do? options: Repair, Replace or Add
|
|
|
|
drale (OP)
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 11:30:27 AM |
|
I have new information.
It is not problem with risers at all. When I unplug any GPU, rig works perfect. So rig works perfect with 5 GPUs. Perhaps problem is with voltage or something else.
What should I do?
Every time I have had issues like this it was due to using an insufficient PSU. You can get a very inexpsensive 500-750w PSU + a dual PSU connector and give that a shot. Likely will get you running. Is it possible? Rig was working perfectly more than 6 months with same PSU. That PSU is on rig right now, no changes. If they are running at full power, then that's right at the max capacity for a 1200w PSU. If they are running at lower wattage, then it should be fine. Have you swapped the PSU out with another 1200w and tried that? I have had rigs with reboot issues because of insufficient PSUs and I've had reboot issues because the PSU was dying. If the issue isn't the riser, but removing a GPU and it's load from the system makes the rig stable, it sounds like a power issue to me, but of course there are lots of possibilities and variables. Is there some software or some other way to test PSU?
|
|
|
|
honestinvestor
Newbie
Offline
Activity: 124
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 12:45:16 PM |
|
The same problem, the whole point was redrawing the cards, so do not strangle them to the maximum!
|
|
|
|
drale (OP)
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 01:04:31 PM |
|
The same problem, the whole point was redrawing the cards, so do not strangle them to the maximum!
How? If you think about reducing memory clock, I tried it, same problem with often reboot.
|
|
|
|
Mohondoa
Newbie
Offline
Activity: 154
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 01:28:34 PM |
|
The problem seem like at your windows system. Because your event log say "The application-specific permission settings do not grant Local..." and "....this security permission can be modified using the Component Services administrative tool", from that clue log it seems there are some activities that are not allowed by the windows system.
|
|
|
|
drale (OP)
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 02:22:05 PM |
|
The problem seem like at your windows system. Because your event log say "The application-specific permission settings do not grant Local..." and "....this security permission can be modified using the Component Services administrative tool", from that clue log it seems there are some activities that are not allowed by the windows system.
I already uninstalled all updates, what I need to do now?
|
|
|
|
Kronos21
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2018, 02:44:22 PM |
|
The problem seem like at your windows system. Because your event log say "The application-specific permission settings do not grant Local..." and "....this security permission can be modified using the Component Services administrative tool", from that clue log it seems there are some activities that are not allowed by the windows system.
I already uninstalled all updates, what I need to do now? Removing updates won't help you. In such cases, I recommend that you reinstall the entire operating system. After the update, you cannot delete everything. I recommend that after reinstalling the operating system to install software that blocks the automatic updates.
|
|
|
|
|