[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[erre]

I hope the disconnection issues are resolved. I'm re-trying now

[erre]

111% LTC profitability ?

Not so much... 

[byt411]

Hi, I just pointed 4 workers at the pool, is there a way to see the stats for all four at the same time?
I.e. I have a four different boxes so the all have different BTC addreses, how do I view the stats for them at the same time?

You cannot, this is on his to-do list.

Terk, let me report that I have had like 60% uptime, and the 40% were disconnects so automatically switched to failover pool.
This was during the last 15 hours.

[Ritual]

111% LTC profitability ?

Not so much... 

Check the historical figures on the site. Also bear in mind the pool did have some problems over the last 24 hours or so - hardly surprising considering it's gone from 20 users to nearly 400 in that time. The fact that it's up and running AT ALL seems to me to be a minor miracle, and is a great testament to the admin.

Fixes have been implemented at lightning speed, and seem to have resolved most issues, so I am confident that value will rise again very quickly.

Having said that, you might consider that 111% is still pretty good, even if it stays there....?

Rit

[Terk]

I'm really sorry for turbulences and instability. I think we managed to handle this issue and the pool seem to work stable now. There were couple of manual restarts needed, the last one just 10 minutes ago, but from now on I hope to don't need any frequent restarts and don't see any disconnection problems. Please report your experiences. I'll be monitoring unexpected disconnects on my side as well.

Our 24-hour profitability dropped a lot because of these issues, but if you look at hourly chart it seems we're back in business and recent hours are good: http://www.clevermining.com/profits/24-hours

I'm sorry if I didn't answer some other questions but I was really busy with tech problems.

I hope we'll all enjoy a smooth ride from now on!

[Ritual]

I'm really sorry for turbulences and instability. I think we managed to handle this issue and the pool seem to work stable now. There were couple of manual restarts needed, the last one just 10 minutes ago, but from now on I hope to don't need any frequent restarts and don't see any disconnection problems. Please report your experiences. I'll be monitoring unexpected disconnects on my side as well.

Our 24-hour profitability dropped a lot because of these issues, but if you look at hourly chart it seems we're back in business and recent hours are good: http://www.clevermining.com/profits/24-hours

I'm sorry if I didn't answer some other questions but I was really busy with tech problems.

I hope we'll all enjoy a smooth ride from now on!

You're doing a sterling job, and the fact that this thread is not growing by 100 posts per hour of people complaining shows that.

So from me, at least, thanks.

Rit.

[byt411]

Suggested feature: Add a "suggested username" in the user search bar. When you type something like 1ABC, all users starting with "1ABC" show up.

[borris123]

I'm using expiry 1, scan-time 1 as well as Kalroth's fork of cgminer.  Both my r9 280x and 7950 are killing it using 2 threads @ 4xintensity.  

280x: 750kh/s (4 percent reject)
7950: 675kh/s (3.3 percent reject)

5s total hash: 1.420M
WU: 1398 shares/min
Total Rejected: 3.22 percent

EDIT:  I had been running the 7950 using Intensity 19 on different pools, but it had double the amount of rejects as the 280X.  I think shifting it to 2 threads @ 4xintensity (equal to 13 Intensity) has dramatically reduced its rejects, but its hard to be sure since Terk was busy fixing his pool at the same time I was busy tweaking my rig. 

I have just tried 2 threads but it crashes after few mins saying thread 6 still exists killing it off. What does this mean?

[byt411]

I'm using expiry 1, scan-time 1 as well as Kalroth's fork of cgminer.  Both my r9 280x and 7950 are killing it using 2 threads @ 4xintensity.  

280x: 750kh/s (4 percent reject)
7950: 675kh/s (3.3 percent reject)

5s total hash: 1.420M
WU: 1398 shares/min
Total Rejected: 3.22 percent

EDIT:  I had been running the 7950 using Intensity 19 on different pools, but it had double the amount of rejects as the 280X.  I think shifting it to 2 threads @ 4xintensity (equal to 13 Intensity) has dramatically reduced its rejects, but its hard to be sure since Terk was busy fixing his pool at the same time I was busy tweaking my rig. 

I have just tried 2 threads but it crashes after few mins saying thread 6 still exists killing it off. What does this mean?

That is a problem with your graphic card.

[sdhayes12345]

I'm using expiry 1, scan-time 1 as well as Kalroth's fork of cgminer.  Both my r9 280x and 7950 are killing it using 2 threads @ 4xintensity.  

280x: 750kh/s (4 percent reject)
7950: 675kh/s (3.3 percent reject)

5s total hash: 1.420M
WU: 1398 shares/min
Total Rejected: 3.22 percent

EDIT:  I had been running the 7950 using Intensity 19 on different pools, but it had double the amount of rejects as the 280X.  I think shifting it to 2 threads @ 4xintensity (equal to 13 Intensity) has dramatically reduced its rejects, but its hard to be sure since Terk was busy fixing his pool at the same time I was busy tweaking my rig. 

I have just tried 2 threads but it crashes after few mins saying thread 6 still exists killing it off. What does this mean?

When running 2 threads, my 280x likes 8192 thread concurrency while my 7950 likes 16384 thread concurrency.  I don't really understand it.  Check to make sure you aren't maintaining your 1 thread TC which would likely be too high?

[borris123]

I'm using expiry 1, scan-time 1 as well as Kalroth's fork of cgminer.  Both my r9 280x and 7950 are killing it using 2 threads @ 4xintensity.  

280x: 750kh/s (4 percent reject)
7950: 675kh/s (3.3 percent reject)

5s total hash: 1.420M
WU: 1398 shares/min
Total Rejected: 3.22 percent

EDIT:  I had been running the 7950 using Intensity 19 on different pools, but it had double the amount of rejects as the 280X.  I think shifting it to 2 threads @ 4xintensity (equal to 13 Intensity) has dramatically reduced its rejects, but its hard to be sure since Terk was busy fixing his pool at the same time I was busy tweaking my rig. 

I have just tried 2 threads but it crashes after few mins saying thread 6 still exists killing it off. What does this mean?

When running 2 threads, my 280x likes 8192 thread concurrency while my 7950 likes 16384 thread concurrency.  I don't really understand it.  Check to make sure you aren't maintaining your 1 thread TC which would likely be too high?

It is on 16384

[ti3go]

I'm in

[erre]

seems to work good right now  

How about the payouts? Seems that "multiple daily payouts" are not out there yet..

[Ritual]

seems to work good right now  

How about the payouts? Seems that "multiple daily payouts" are not out there yet..

You need 0.01 BTC to get a payout. Otherwise there is a Sunday payout for small balances of 0.001 or less.

And yeah, I agree, it's bloody flying. Terk is doing an awesome job of managing it too - when does the guy sleep?

Rit.

[Terk]

There were three payouts today and the money for the fourth is on its way from exchanges - tx has just been confirmed so it will be paid out in the next batch in half an hour.

[Terk]

Here's the list of recent payouts: http://www.clevermining.com/payouts
And here are current balances: http://www.clevermining.com/balances

in case you didn't find them in the left menu. Most of the unexchanged balance is already on its way back from exchanges so it will be updated to “ready to pay” and paid soon. Payouts jobs run every hour at 55 minutes.

[ixobelle]

What is the pool fee? Are the number on stats pages before or after fee?
All numbers are after fee, so they are your actual earnings. Our fee is progressive and depends on how good we perform in a given day. On good days we take a bit higher fee but on bad days we take very little fee. This ensures that your profits aren't hit that much on a bad day. Our fee during bad days is as low as 1%.

How high does it get on a "good day"? This seems to have been intentionally left out.

[XliptTit]

Disconnects are no longer an issue

But rejected rates are still high, I left the miner runing for about 30 minutes and one miner would get aprox 5% reject,which is ok, but the other miner got aprox 10% reject rate. After some reboot the reject rate swapped, could it be an username/btc adress issue?

I added --scan-time 1 and --expiry 1 , I think it helped a little.


Anyway keep improving

[zneww]

What is the pool fee? Are the number on stats pages before or after fee?
All numbers are after fee, so they are your actual earnings. Our fee is progressive and depends on how good we perform in a given day. On good days we take a bit higher fee but on bad days we take very little fee. This ensures that your profits aren't hit that much on a bad day. Our fee during bad days is as low as 1%.

How high does it get on a "good day"? This seems to have been intentionally left out.

I asked this couple pages back and couldn't get a straight answer.

[pindis]

about 6 % rejects atm. Think I have to swap to middlecoin again until there's an eu server