[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[zneww]

nope

[buffalojr]

Terk,

Great pool. Small time miner here.

My rejects have been averaging in the 2-3%, though I've had up to 6% and once I had a 12%. Would it be possible to add a chart like the hashrate chart but documenting the rejected hashrate? I think another user mentioned this as well.

I understand if this gets pushed a little down the road since you are currently working reject/profitability issues.

Keep up the awesome work.

[Terk]

My rejects have been averaging in the 2-3%, though I've had up to 6% and once I had a 12%. Would it be possible to add a chart like the hashrate chart but documenting the rejected hashrate? I think another user mentioned this as well.

Yes, I have this on my (very long) todo list in a nice-to-have category.

I understand if this gets pushed a little down the road since you are currently working reject/profitability issues.

Correct. I have few more urgent lists before I start nice-to-have.

[roy7]

Best looking pool I've seen. Love the layout, design, colors, everything.

[STT]

Not a fan of high diff but it does depend on the coin.  Its working fine right now, not sure which one this is.    On some coins it'll just keep finding new blocks before any shares are submitted, in theory no problem to big miners or farms but I reboot and use machine for other things

We can take this over PM, don't want to derail.

[justin2k5]

Im getting arround 8-12% rejects (2 rigs) , my ping going skyhigh (800-1000ms) this could be the problem? for now im back to MC.

Keep up your good work, !

[borris123]

What are your plans for sorting out the reject rate? I can say I have tested the server enough to give an exact % of rejects roughly 9% after few hours but my connection keeps dropping out...stupid BT.

[XliptTit]

ping should not be a problem for that rate of reject, we are not in P2pool. It would be nice,after you finish the urgent things, to have the overall reject of the pool, so we can see if the rejects are because of the coin or on our end. 15min status upgrade would be great too

Keep the good work

[TazMan143]

So I am liking the pool so far. I had previously been mining on MC for about 2 months. What I have seen so far I am liking. Definitely like the layout of the site alot more than MC. But I would make one suggestion. Maybe look at putting up a USEast server. I know that MC was struggling with rejections alot before there USEast server went online. Getting shares back to the server and high ping rates do actually matter. If alot of your users are in the East or in the EU region then there rejection rate will always be high. Just a suggestion.

Keep up the good work.

[Ritual]

Sorry if this is a stupid question but just one thing I don't really get about the user stats page...

I see my hash rate as a green circle. Sometimes the circle is complete, other times there is a missing arc (in grey).

Is the grey part rejects? Or is it the percentage of my 24hr avg hash rate that is currently being measured?

And why does my hash rate seem to vary a lot? Miner stats is showing it solid as a rock...

Thanks!

Rit.

[cokeman0]

Hi

I'm getting a lot of these:

[15:45:50] CelverMine stale share detected, submitting as user requested

Are they counted, or do I have to see if I can reduce then ? and if I need to reduce then, are there any hints on how to reduce them ?

[Capttech08]

With my 5 cards (3.5mh/s) pointed here, I'm down to 4.8% rejection rate. Much lower than any other pool I have been on recently. Keep up the good work! Pay out is looking good for today!

[byt411]

Terk, even when you turn off vardiff, can you please make the default 256 -_- I'm having some trouble here, with a crappy miner.

[Capttech08]

With my 5 cards (3.5mh/s) pointed here, I'm down to 4.8% rejection rate. Much lower than any other pool I have been on recently. Keep up the good work! Pay out is looking good for today!

And it just jumped to 13.7% /sigh. with the vardiff off, my difficulty shouldnt really matter right? I have 4 of my cards running 1024 and 1 running 256 atm.

[borris123]

Reject rate has gone down few % whether that's me messing observer aide. But o still getting a lot of stale shares

[MagicSnow]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

[Capttech08]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

[MagicSnow]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

[cokeman0]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

I'm using cgminer, kalroth edition (version 3.7.3)

[Capttech08]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

I use GUIMiner and have never had any issues with it. The only thing I dislike about it, and I may have just never figured it out, is there is no way to set up failover server connections. So if 1 server goes down, it doesn't auto switch to another, online server. But I have teamviewer all over the place so it is easy to remote in and switch servers. I can even do it on my phone to my rigs