[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[dency45]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

I'm using cgminer, kalroth edition (version 3.7.3)

I thought version above 3.7.2 does not support scrypt mining.

[byt411]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

I use GUIMiner and have never had any issues with it. The only thing I dislike about it, and I may have just never figured it out, is there is no way to set up failover server connections. So if 1 server goes down, it doesn't auto switch to another, online server. But I have teamviewer all over the place so it is easy to remote in and switch servers. I can even do it on my phone to my rigs

How the heck are you using GUIMiner on scrypt?! You surely mean GUIMiner-Scrypt?!

[cokeman0]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

I'm using cgminer, kalroth edition (version 3.7.3)

I thought version above 3.7.2 does not support scrypt mining.

Kalroth edition, is a 3.7.2 but  mod'ed. it's still scrypt :-) only with some fixes...

[Capttech08]

Hi, compliments to the devs for the awesome pool, but i have a problem... im mining for like 5h but in the "Last Hour Hashrate" it say 0, i have more than 150 accepted shares and mining at about 44 mh/s

If you are up for 5 hours and running 44MH/s and only have 150 accepted, you have an issue on your end I would be. I have 1 card running at 277kh/s and for the past 1 hour it has 27 shares accepted. So your number seems crazy low to me. I would restart your rig just to be safe if oyu haven't yet. Link your address and I will look up and let you know if I can find anything to help

Thank you, i will restart my rig btw what software are you using for mining(maybe is a software problem)?

Thanks

I use GUIMiner and have never had any issues with it. The only thing I dislike about it, and I may have just never figured it out, is there is no way to set up failover server connections. So if 1 server goes down, it doesn't auto switch to another, online server. But I have teamviewer all over the place so it is easy to remote in and switch servers. I can even do it on my phone to my rigs

How the heck are you using GUIMiner on scrypt?! You surely mean GUIMiner-Scrypt?!

Yeah, with crypt of course. Sorry

[Alexoc]

I don't get why the profitability is so low? When i look at Coinwarz then there are everytime some Coins with 0.013 BTC/Msh/Day. So why does clevermining don't get over 0.0127 BTC/Msh/Day the last 24 hours? Is this becaus of the server problems? The last 24 houres run fine for me with normal reject rate.

[XliptTit]

is hashrate report fine? I am getting a lower hashrate than expected in the site.

[Terk]

Sorry if this is a stupid question but just one thing I don't really get about the user stats page...

I see my hash rate as a green circle. Sometimes the circle is complete, other times there is a missing arc (in grey).

Is the grey part rejects? Or is it the percentage of my 24hr avg hash rate that is currently being measured?

And why does my hash rate seem to vary a lot? Miner stats is showing it solid as a rock...

Thanks!

Rit.

It's your last hour hashrate compared to 24 hour average.

Regarding variance, please be aware that pool only estimates your hashrate based on shares you submitted. Your miner is more lucky in one hour and less lucky in another. With vardiff disabled it affects smaller rigs more.

I don't get why the profitability is so low? When i look at Coinwarz then there are everytime some Coins with 0.013 BTC/Msh/Day. So why does clevermining don't get over 0.0127 BTC/Msh/Day the last 24 hours? Is this becaus of the server problems? The last 24 houres run fine for me with normal reject rate.

Part of it are technical issues but most of them are resolved now (I am still working on some though). Part is not considering orphan blocks in what these sites show (their numbers assume that none of your blocks ecome orphaned, which is not possible and the faster the coin is the more there are orphaned blocks). I am monitoring competition and other altcoin switching pools have similar results today - we're not doing worse than them. Not that I'm happy with that - my goal is to deliver better profits than others and once I deal with all tech problems we should go back to exceptional profitability.

[Ritual]

Thanks Terk. My miner is indeed a very small one, so I'm happy with your reply.

Keep up the good work - and try to get some sleep man!

Rit.

[bitter_miner]

It's your last hour hashrate compared to 24 hour average.

any plans to have personal stats update more frequently, say every 30 minutes (even 15) instead of hourly or would this incur too much overhead??

[borris123]

It's your last hour hashrate compared to 24 hour average.

any plans to have personal stats update more frequently, say every 30 minutes (even 15) instead of hourly or would this incur too much overhead??

Defo needed and a timer for when its next going to be refreshed

[TazMan143]

I would have to agree. I would love to be able to get better stats updates. I would also be fine with a json or api pull I could do to build my own stats page.

[RickJamesBTC]

Ok, I'll give it a shot. Lots of problems with middlecoin so I'll point a few rigs your way. hope its stable!

[shango]

Allright I am in!
One relatively small rig with 1.75mh/s pointed to us.clevermining.com.
I am in the EU and for the 1st hour there are at about 5% rejects which is not so bad. If it is stable for the next week we can move the other rigs over too. We will be comparing to middlecoin results on a similar rig.
I 'll post the reject rate in the morning, after some 8 hours of mining there.

[ponech]

Rejected: 0.4 MH/s (17.6%)   

[Glandoux]

Is anyone still having the problems of not mining for like 10-20min pretty often?  And high rejects?

[borris123]

Rejected: 0.4 MH/s (17.6%)   

Rejects are getting bad. Stale shares are high. Pool 0 stale share detected submitting as users requested loads

[BuildTheFuture]

I've been trying out us.clevermining.com for the past hour, only getting 1.8% rejects.

[byt411]

I have chosen to point at altcoins for now since my tiny miner does not work with 512 difficulty.

[RickJamesBTC]

What's up with the reject rates?? I've pointed enough miners at your pool to be the second biggest user, but some of my machines suddenly have 9,10, 12 % rejects. I'll be leaving soon if I don't hear about an answer.

[borris123]

I've been trying out us.clevermining.com for the past hour, only getting 1.8% rejects.

put  --no-submit-stale and then see what your accepted rate is...