lolMiner-144 0.38 Preview, Equihash 144.5 for AMD & Nvidia, Linux & Windows

[MinermanNC]

Its crazy to believe that so many people are still using the Tahiti's according to this thread.

Basically if you got a Tahiti you are better off mining XMR at the moment.

Reason why is because those you can reduce the voltage to the min value of 0.950V and if you got a decent ASIC quality you can run them at 1000/1500 core and you will get like 600H/s and it will only use like 130 Watts of power.

With ZEC it always used almost 200 Watts or so. With ETH it used even more electricity. The worst was Scrypt which was like 350 Watts per GPU from the wall.

That's a great summary for 7950's

Actually I still run 6 x 7950's and one 7970  Doing well on an ethhash clone with them, but they always hold their weight even with the coins you mentioned. Some better some worse 

Bet ya the Tahiti cores have stood the test of time. It was that nice (384-Bit memory) that gave these bad boys the edge lol

[1715304893]

1715304893

[1715304893]

1715304893

[1715304893]

1715304893

[nansafap]

we got minus difficulty on the pool on tahiti card and high abnormal hashrate, like 90s/s per card
this miner ok for other amd card? or just not ok for tahiti ?

[Paulc2011]

Any updates at all ? Miners not working very well any tweaks comming ?

[egyptianbman]

All the links give an error about potential virus. Is there somewhere else we can download this miner?

[ivomm]

All the links give an error about potential virus. Is there somewhere else we can download this miner?

Some browsers like chrome detect the mining software and block the download. Others like IE usually don't. Try different browsers and if they all block, perhaps there is an option to check the links for viruses which can be turned off temporarily.

[Racko]

Any updateds on this miner or another miner? NVIDIA already had 3-4 miner updates

[Lolliedieb]

I just updated the download links, because some were not able to load the miner.

Working heavily on new code, but I am only one person with dayjob and family beside, so it takes some time - but new (faster) code will come

[nansafap]

I just updated the download links, because some were not able to load the miner.

Working heavily on new code, but I am only one person with dayjob and family beside, so it takes some time - but new (faster) code will come

only this miner support amd card..
amd user will wait , dont forget about tahiti , thank u 

[restless]

Win7 + drivers 15.12 (!!!)
3*7950
average speed ~30 sol/s (10 per card @ stock clocks, mem striped)

On 2 other systems which are almost identical it doesn't work
One is with same 15.12, the other with blockchain drivers from 27.07.2017, both Win7 with 4 * 7950s

Is adding parameters to control intensity/memory usage possible? Or more detailed debug info.

[nansafap]

Win7 + drivers 15.12 (!!!)
3*7950
average speed ~30 sol/s (10 per card @ stock clocks, mem striped)

On 2 other systems which are almost identical it doesn't work
One is with same 15.12, the other with blockchain drivers from 27.07.2017, both Win7 with 4 * 7950s

Is adding parameters to control intensity/memory usage possible? Or more detailed debug info.

work on drivers 15.12?
adrenalin driver n blockchain driver not working so far, thanks mate, ill try it
what coin are u mine?

[kyputejib]

Win7 + drivers 15.12 (!!!)
3*7950
average speed ~30 sol/s (10 per card @ stock clocks, mem striped)

On 2 other systems which are almost identical it doesn't work
One is with same 15.12, the other with blockchain drivers from 27.07.2017, both Win7 with 4 * 7950s

Is adding parameters to control intensity/memory usage possible? Or more detailed debug info.

work on drivers 15.12?

work

[nansafap]

Win7 + drivers 15.12 (!!!)
3*7950
average speed ~30 sol/s (10 per card @ stock clocks, mem striped)

On 2 other systems which are almost identical it doesn't work
One is with same 15.12, the other with blockchain drivers from 27.07.2017, both Win7 with 4 * 7950s

Is adding parameters to control intensity/memory usage possible? Or more detailed debug info.

not working

http://prntscr.com/k4dohl

hashing but still negative difficulty

[cryptomaxsun]

RX480 4 Gb, Windows 7 x64, pool zhash.pro.

Miner takes the job, hashing, but there are no shares accepted, there is no display on the pool.
What is the problem?

[swisstrader]

I have Win7 64bit and AMD Radeon RX Vega 64, driver v18.6.1,
but the miner doesn't start.

I see N number of shell windows running after starting the miner.

Have overwritten the kernel gfx901.bin ...

What I need to do?

Thank you.

[swisstrader]

I have Win7 64bit and AMD Radeon RX Vega 64, driver v18.6.1,
but the miner doesn't start.

I see N number of shell windows running after starting the miner.

Have overwritten the kernel gfx901.bin ...

What I need to do?

Thank you.

Here is the solution for AMD RX Vega 64 8GB cards:

1. Download the extra compiled Vega64 file named gfx901.bin.

2. Delete in subfolder lolMiner_v0.38\kernels\144_5 the files gfx900.bin and gfx901.bin .

3. Then copy the extra file gfx901.bin into the same folder and rename the file to gfx900.bin,
    now will run the miner perfectly with your AMD RX Vega 64 8GB.

Enjoy!

Thanks to the developer Lolliedieb, got the solution by starting cmd line lolMiner-144.exe -h
 

[SuppaHash]

Cool! Waiting for amd polaris optimization!

[boo50]

RX480 4 Gb, Windows 7 x64, pool zhash.pro.

Miner takes the job, hashing, but there are no shares accepted, there is no display on the pool.
What is the problem?

are you mining Snowgem ?

[matbz]

Any updates in windows dependences?

[joeykolb]

what am i doing wrong here? i have account on suprnova



{
   "DEFAULTS" : {
      "PLATFORM"         : "AUTO",
      "DEVICES"         : "AUTO"    
   },

   "EXAMPLE1" :
   {
      "COIN" : "BTG",
      "POOLS" : [
         {"POOL" : "btg.suprnova.cc:8866",
          "PORT" : "8866",
          "USER" : "GUu6zU3rfL38VQ7Qqsy5XtGkQGq4Pi3hEn",
          "PASS" : "x"}
      ]
   },

   "EXAMPLE2" :
   {
      "COIN" : "BTG",
      "POOLS" : [
         {"POOL" : "btg.suprnova.cc:8866",
          "PORT" : "8866",
          "USER" : "GUu6zU3rfL38VQ7Qqsy5XtGkQGq4Pi3hEn",
          "PASS" : "x"},
         {"POOL" : "btg.suprnova.cc",
          "PORT" : "8866",
          "USER" : "joeykolb.joe",
          "PASS" : "x"}
      ]
   }   [img]

[joeykolb]

says:  Lost connection to stratum server : or server not reachable. with this conf.