[ANN][FLAP] FlappyCoin ★ OLD/DEAD THREAD GO TO NEW ONE ★

[roslinpl]

Added nodes from the OP to .conf and still after half an hour - No block sources available. Any other nodes to try?

I had same problem today. Make sure you save .conf file as a flappycoin.conf 

By mistake I did save it as flappycoin.conf.txt maybe you did same mistake?

and make sure you put it into right folder.

User>Name>AppData>Roaming>Flappycoin>flappycoin.conf

[dgross0818]

You can also try https://www.dropbox.com/s/bca3vckr8lzi95x/flappy.conf

It's on Page 30 and what I used to get my wallet up and running

[byteflush]

Nope, flappycoin.conf it is. I'm mining at a pool and would like my Flappies to find a way to my wallet.

[roslinpl]

Nope, flappycoin.conf it is. I'm mining at a pool and would like my Flappies to find a way to my wallet.

maybe firewall blocking?

[byteflush]

Nope, flappycoin.conf it is. I'm mining at a pool and would like my Flappies to find a way to my wallet.

maybe firewall blocking?

All other wallets work fine, my router is only blocking incoming connections on several ports.

You can also try https://www.dropbox.com/s/bca3vckr8lzi95x/flappy.conf

It's on Page 30 and what I used to get my wallet up and running

Trying that one right now, but still no luck. I'll wait for a while and see if anything comes up.

Meanwhile, I'm thinking that maybe some other wallet I have running is conflicting with Flappy. I'll check that while I'm waiting.

[byteflush]

OK, no luck so far. Can any of you post getpeerinfo?
(Help - Debug - Console - getpeerinfo)

[barryzand]

Flappycoin is the new Dogecoin for sure.   Everyone should be mining this now while the diff is still low.  I started mining it.  It's going to blow up just like doge did... 3 weeks min. 

dont count on that man... well be lucky if it even hits 20 satoshi... this is a hype coin... hypes die  

[barryzand]

OK, no luck so far. Can any of you post getpeerinfo?

are you sure you saved it to the right extension??

is it flappycoin.conf

OR

does it say flappycoin.conf.TXT

[byteflush]

OK, no luck so far. Can any of you post getpeerinfo?

are you sure you saved it to the right extension??

is it flappycoin.conf

OR

does it say flappycoin.conf.TXT

Thank you for your help, but no, I did not do THAT.

[fearisfearless]

OK, no luck so far. Can any of you post getpeerinfo?
(Help - Debug - Console - getpeerinfo)

Where did you put the .conf file?  AppData\Roaming\Flappycoin?  

[byteflush]

Yep. It's there.

[roslinpl]

Yep. It's there.

Copy your .conf file here :-)
Maybe we will sort that out

[byteflush]

Yep. It's there.

Copy your .conf file here :-)
Maybe we will sort that out

Well, it's the same one that was suggested to me, I only changed the ports in case it conflicted with some other wallet...

Code:

rpcuser=u
rpcpassword=p
daemon=1
server=1
listen=1
port=13130
rpcport=13131

addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651

I would just like to get some "getpeerinfo" to compare the nodes.

Thanks for all the help, though. This is the first time I encounter such problem with a wallet, and I've had about 20-30-ish wallets on this machine.

[fearisfearless]

Yep. It's there.

look at my post close to the bottom.  https://bitcointalk.org/index.php?topic=464743.640  See if this helps.  I put my conf file with my flappycoin-qt.exe and others put in AppData\Roaming\Flappycoin.  I can fire up my webex and help you, if you'd like

[dgross0818]

Flappycoin is the new Dogecoin for sure.   Everyone should be mining this now while the diff is still low.  I started mining it.  It's going to blow up just like doge did... 3 weeks min. 

dont count on that man... well be lucky if it even hits 20 satoshi... this is a hype coin... hypes die  

Nothing wrong with 20 satoshi... that's 5x where it is now, and it means every million is worth 0.2BTC You can still mine that even with 1 2-3 card rig in a day :5-P

If I invest 0.5BTC in renting rigs then I can expect to make around 4-4.5BTC if it goes to 20 Satoshi :]

[fearisfearless]

Yep. It's there.

Copy your .conf file here :-)
Maybe we will sort that out

Well, it's the same one that was suggested to me, I only changed the ports in case it conflicted with some other wallet...

Code:

rpcuser=u
rpcpassword=p
daemon=1
server=1
listen=1
port=13130
rpcport=13131

addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651

I would just like to get some "getpeerinfo" to compare the nodes.

Thanks for all the help, though. This is the first time I encounter such problem with a wallet, and I've had about 20-30-ish wallets on this machine.

Replace config file with this

rpcuser=flappy
rpcpassword=mario
daemon=1
server=1
listen=1
rpcport=11555

addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651

[minerman1234]

Yep. It's there.

Copy your .conf file here :-)
Maybe we will sort that out

Well, it's the same one that was suggested to me, I only changed the ports in case it conflicted with some other wallet...

Code:

rpcuser=u
rpcpassword=p
daemon=1
server=1
listen=1
port=13130
rpcport=13131

addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651

I would just like to get some "getpeerinfo" to compare the nodes.

Thanks for all the help, though. This is the first time I encounter such problem with a wallet, and I've had about 20-30-ish wallets on this machine.

To begin, the "port" field shouldn't be necessary.  Secondly, it looks like you're missing the rpcconnect field, try adding:

rpcconnect=127.0.0.1

If you're mining from a rig that's separate from the one on your wallet, you'll also need to add rpcallowip as a field as well.

[alchebyte]

OK, no luck so far. Can any of you post getpeerinfo?
(Help - Debug - Console - getpeerinfo)

getpeerinfo


[
{
"addr" : "173.58.8.110:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601476,
"bytessent" : 527098,
"bytesrecv" : 11744651,
"blocksrequested" : 0,
"conntime" : 1392593284,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5315,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "213.114.129.89:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601475,
"bytessent" : 675301,
"bytesrecv" : 3455514,
"blocksrequested" : 0,
"conntime" : 1392593290,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5315,
"banscore" : 0
},
{
"addr" : "99.241.74.216:11556",
"services" : "00000003",
"lastsend" : 1392601477,
"lastrecv" : 1392601476,
"bytessent" : 353498,
"bytesrecv" : 1963709,
"blocksrequested" : 0,
"conntime" : 1392593291,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5315,
"banscore" : 0
},
{
"addr" : "98.196.133.57:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601475,
"bytessent" : 267624,
"bytesrecv" : 2100373,
"blocksrequested" : 0,
"conntime" : 1392593297,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5316,
"banscore" : 0
},
{
"addr" : "137.226.148.87:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601473,
"bytessent" : 329021,
"bytesrecv" : 1963115,
"blocksrequested" : 0,
"conntime" : 1392593313,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5316,
"banscore" : 0
},
{
"addr" : "78.90.137.167:11556",
"services" : "00000003",
"lastsend" : 1392601477,
"lastrecv" : 1392601475,
"bytessent" : 286214,
"bytesrecv" : 1548176,
"blocksrequested" : 0,
"conntime" : 1392593348,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5317,
"banscore" : 0
},
{
"addr" : "173.51.180.254:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601475,
"bytessent" : 243209,
"bytesrecv" : 1518156,
"blocksrequested" : 0,
"conntime" : 1392593352,
"version" : 70002,
"subver" : "/Satoshi:1.0.0.1/",
"inbound" : false,
"startingheight" : 5317,
"banscore" : 0
},
{
"addr" : "5.175.193.221:11556",
"services" : "00000003",
"lastsend" : 1392601476,
"lastrecv" : 1392601476,
"bytessent" : 114248,
"bytesrecv" : 199770,
"blocksrequested" : 0,
"conntime" : 1392596218,
"version" : 70002,
"subver" : "/Satoshi:0.8.6.2/",
"inbound" : false,
"startingheight" : 5370,
"banscore" : 0
}
]

[byteflush]

Thank you all for your help, this really is a nice community. I have tried:

- Using the .conf fearisfearless pasted (it's the same .conf I used before changing ports and username/password) - no luck
- Copying the .conf to qt folder as suggested by fearisfearless (I though this might work) - but still no luck
- Adding the rpcconnect line as minerman1234 suggested (and also removing port line later, though I don't think that's necessary) - nothing

Thank you very much for your suggestions, though.

As I mentioned, I could debug this issue myself if anyone would paste getpeerinfo from their windows wallet (addresses:ports, you can censor everything else if you want to).
Thank you alchebyte!

[byteflush]

Working now thanks to new nodes. If anyone needs it, my addnodes:

Code:

addnode=173.58.8.110:11556
addnode=213.114.129.89:11556
addnode=99.241.74.216:11556
addnode=98.196.133.57:11556
addnode=137.226.148.87:11556
addnode=78.90.137.167:11556
addnode=173.51.180.254:11556
addnode=5.175.193.221:11556
addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651

First 8 lines were added thanks to alchebyte's getpeerinfo.