The computer has rebooted from a bugcheck.

[anakbaruza]

Hello,
i am running claymore in few hours.
and sometimes my windows look restarting with unknown reason

Mobo ASROCK B250 gaming k4
Memory RAM PC HyperX Fury DDR4 8GB
INTEL PROCESSOR G4400 BOX LGA1151
SSD 120
PSU CORSAIR RMX 1000W GOLD
Sapphire RX 580 nitro+ special edition x 6


can you help me what's wrong ?

and here is my claymore command

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool ssl://asia1.ethermine.org:5555 -ewal wallet.worker -epsw x -mode 1 -etha 0 -cclock 1150,1150,1150,1150,1150,1155 -cvddc 880,900,890,880,880,880 -mclock 2000,2000,2000,2000,2000,2000 -mvddc 880,905,895,885,875,880 -tt 60 -fanmin 65 -fanmax 80 -platform 1 -eres 3 -tstop 80 -tstart 50 -dcri 8,14,14,14,14,14

[leonix007]

Hello,
i am running claymore in few hours.
and sometimes my windows look restarting with unknown reason

Mobo ASROCK B250 gaming k4
Memory RAM PC HyperX Fury DDR4 8GB
INTEL PROCESSOR G4400 BOX LGA1151
SSD 120
PSU CORSAIR RMX 1000W GOLD
Sapphire RX 580 nitro+ special edition x 6


can you help me what's wrong ?

and here is my claymore command

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool ssl://asia1.ethermine.org:5555 -ewal wallet.worker -epsw x -mode 1 -etha 0 -cclock 1150,1150,1150,1150,1150,1155 -cvddc 880,900,890,880,880,880 -mclock 2000,2000,2000,2000,2000,2000 -mvddc 880,905,895,885,875,880 -tt 60 -fanmin 65 -fanmax 80 -platform 1 -eres 3 -tstop 80 -tstart 50 -dcri 8,14,14,14,14,14

a lot of possible cause, might be a clock issue, overheat, risers, Power supplies, etc

Are your GPU's modded?

Start with a default command lines and default clocks excluding those above

check also your miner logs and windows logs thru event viewer

you may get a hint what would be the cause

in windows type eventvwr\windows Logs\Application

[anakbaruza]

a lot of possible cause, might be a clock issue, overheat, risers, Power supplies, etc

Are your GPU's modded?

Start with a default command lines and default clocks excluding those above

check also your miner logs and windows logs thru event viewer

you may get a hint what would be the cause

in windows type eventvwr\windows Logs\Application

Yes, My gpu is modded
im check windows logs
i found some errors there

from System

Code:

The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000ea (0xffff90854aa3f080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 585eea90-3d66-4476-9908-2e491f4e08f6.
The previous system shutdown at 17:48:19 on ‎10/‎08/‎2018 was unexpected.

[ciprianpt]

Best way to identify which card is crashing is to add the following command in config file "-wd 0", this will disable watchdog and it will not restart the rig when a gpu freeze, -wd 0 will disable that card from mining and will show an error message like "GPU 0 bla bla bla needs to restart the miner"

[fanatic26_]

You can fix this issue by running linux, which you should be doing anyway if you are mining.

[MagicSmoker]

Yes, My gpu is modded
im check windows logs
i found some errors there

from System

Code:

The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000ea ...

If you search for "windows bugcheck 0x000000ea" one of the first results explains this is basically a driver crash, but that is the effect, not the cause; the cause is most likely pushing GPU clocks too high.

[crairezx20]

Have you tried to set your paging file to 32gb or 64gb?
It might be the reasons why your claymore couldn't run properly and you must use some tools to monitor the GPU temps and maybe your cards reach the higher temp that is why it keeps rebooting.

[anakbaruza]

Have you tried to set your paging file to 32gb or 64gb?
It might be the reasons why your claymore couldn't run properly and you must use some tools to monitor the GPU temps and maybe your cards reach the higher temp that is why it keeps rebooting.

i sett my paging file to 32800
sometimes .
i will try 64gb
my card not higher temp.
53 only