Bitcoin Forum
March 28, 2024, 11:10:24 PM *
News: Latest Bitcoin Core release: 26.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: XFX 5830 cooling before and after  (Read 1841 times)
pandemic (OP)
Sr. Member
****
Offline Offline

Activity: 434
Merit: 250


View Profile
October 21, 2011, 11:26:13 PM
Last edit: October 22, 2011, 01:16:15 AM by pandemic
 #1

So I've got a 2nd gen XFX 5830 with the 5 heat pipe cooler and a 1st gen XFX 5830 with the 2 pipe cooler.

Right now they're both running at 958/300 and they both get about 305-307mh/s.
1st gen is at 100% fan speed and 2nd gen is at 50%
Right now the 1st gen is at 72.5c and the 2nd gen is at 64c.

I'm going to let it run for a while and then see what the temps are then. After that I'm going to replace the cooler with a new one that XFX sent (current one is sometimes not running right) and I'll put arctic silver on to see the difference. I'll try to keep ambient temps the same. Doors/windows are shut.

edit:
1st gen is at 100% fan speed, 307mh/s and 69.5C
2nd gen is at 60% fan speed, 307mh/s and 59.5C

Going to do arctic silver swap now.

put the new OEM fan on with artic silver
1st gen is at 100% fan speed, 306mh/s and 66C
2nd gen is at 60% fan speed, 306mh/s and 59C

In summary, I guess arctic silver helps a bit... but not much. Adding 3 more heat pipes would help a lot more.
1711667424
Hero Member
*
Offline Offline

Posts: 1711667424

View Profile Personal Message (Offline)

Ignore
1711667424
Reply with quote  #2

1711667424
Report to moderator
1711667424
Hero Member
*
Offline Offline

Posts: 1711667424

View Profile Personal Message (Offline)

Ignore
1711667424
Reply with quote  #2

1711667424
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1711667424
Hero Member
*
Offline Offline

Posts: 1711667424

View Profile Personal Message (Offline)

Ignore
1711667424
Reply with quote  #2

1711667424
Report to moderator
1711667424
Hero Member
*
Offline Offline

Posts: 1711667424

View Profile Personal Message (Offline)

Ignore
1711667424
Reply with quote  #2

1711667424
Report to moderator
pekv2
Hero Member
*****
Offline Offline

Activity: 770
Merit: 502



View Profile
October 22, 2011, 08:54:36 AM
 #2

edit:
1st gen is at 100% fan speed, 307mh/s and 69.5C
2nd gen is at 60% fan speed, 307mh/s and 59.5C

Going to do arctic silver swap now.

put the new OEM fan on with artic silver
1st gen is at 100% fan speed, 306mh/s and 66C
2nd gen is at 60% fan speed, 306mh/s and 59C

In summary, I guess arctic silver helps a bit... but not much. Adding 3 more heat pipes would help a lot more.

Arctic silver takes 300 hours to cure then shutdown/cool points. Most newer technology TIMs do not have a cure time. Meaning you won't get the full effect from AS5 for a full 300 hours.

If you're running a stock xfx fan at 100%, your gonna burn up/seize that fan in no time.

Most of us run between 65-80% speed of the fans to keep them living.

Just a few suggestions.
pandemic (OP)
Sr. Member
****
Offline Offline

Activity: 434
Merit: 250


View Profile
October 22, 2011, 05:50:48 PM
 #3

edit:
1st gen is at 100% fan speed, 307mh/s and 69.5C
2nd gen is at 60% fan speed, 307mh/s and 59.5C

Going to do arctic silver swap now.

put the new OEM fan on with artic silver
1st gen is at 100% fan speed, 306mh/s and 66C
2nd gen is at 60% fan speed, 306mh/s and 59C

In summary, I guess arctic silver helps a bit... but not much. Adding 3 more heat pipes would help a lot more.

Arctic silver takes 300 hours to cure then shutdown/cool points. Most newer technology TIMs do not have a cure time. Meaning you won't get the full effect from AS5 for a full 300 hours.

If you're running a stock xfx fan at 100%, your gonna burn up/seize that fan in no time.

Most of us run between 65-80% speed of the fans to keep them living.

Just a few suggestions.

Lifetime warranty. Good point though, I'll see what the temps are at 80%. What's the safe temp range, under 80c?
pandemic (OP)
Sr. Member
****
Offline Offline

Activity: 434
Merit: 250


View Profile
October 22, 2011, 07:50:45 PM
 #4

I'm now running the 1st gen with 80% fan, 330mh/s (1040/300) at 73.5C.
Eveofwar
Sr. Member
****
Offline Offline

Activity: 406
Merit: 250


View Profile
October 23, 2011, 12:46:51 AM
 #5

If you're running a stock xfx fan at 100%, your gonna burn up/seize that fan in no time.

Does this statement apply to all xfx fans or only the ones on 5830s?

I'm pretty sure that goes for almost all fans @ 100% continuous use.
pandemic (OP)
Sr. Member
****
Offline Offline

Activity: 434
Merit: 250


View Profile
October 23, 2011, 01:04:32 AM
 #6

Probably all fans. Some are likely better than others. I wouldn't be so abusive if I didn't have the lifetime warranty.
pekv2
Hero Member
*****
Offline Offline

Activity: 770
Merit: 502



View Profile
October 23, 2011, 11:06:25 AM
 #7

If you're running a stock xfx fan at 100%, your gonna burn up/seize that fan in no time.

Does this statement apply to all xfx fans or only the ones on 5830s?

Most of all of any gfx card stock fan. After market coolers with after market fans, you can oil the bearing and run them fans 100% all the time. Just these stock fans are junk and fragile I guess you can say.
tritium
Member
**
Offline Offline

Activity: 81
Merit: 10


View Profile
October 23, 2011, 12:57:30 PM
 #8

all 3 of my XFX 5830 fans have siezed, it works if i stick a 92mm case fan where the old one was but it makes it a 3 slot card then.

does anyone know where I can get replacement fans from, I can't find any here in the UK and i don't want to get a full aftermarket cooler unless they are under £10. I don't mind ordering from abroard aslong as they are cheap

1FCzN34C1xCLsDaLxfY7yB5CQKN74ruGHV
pekv2
Hero Member
*****
Offline Offline

Activity: 770
Merit: 502



View Profile
October 23, 2011, 01:12:55 PM
 #9

does anyone know where I can get replacement fans from, I can't find any here in the UK and i don't want to get a full aftermarket cooler unless they are under £10. I don't mind ordering from abroard aslong as they are cheap

If you still have the warranty on your name, fill out a ticket form at xfx, they most likely will mail off a new fan to you, they mailed me like 5 of em, and each of em just ended up dieing within weeks. I ended up taking off the plastic shield and fan, wire tied a 120mm fan to the hs.
pekv2
Hero Member
*****
Offline Offline

Activity: 770
Merit: 502



View Profile
October 23, 2011, 01:18:02 PM
 #10

Should we all be oiling our fan bearings??

If your gfx card fan has an oil well, look no further > Lubricate Your Fan: Prepping a sleeve bearing fan for work . If it doesn't which in most cases the stock fan doesn't, well kinda screwed.
tritium
Member
**
Offline Offline

Activity: 81
Merit: 10


View Profile
October 23, 2011, 02:52:39 PM
 #11

does anyone know where I can get replacement fans from, I can't find any here in the UK and i don't want to get a full aftermarket cooler unless they are under £10. I don't mind ordering from abroard aslong as they are cheap

If you still have the warranty on your name, fill out a ticket form at xfx, they most likely will mail off a new fan to you, they mailed me like 5 of em, and each of em just ended up dieing within weeks. I ended up taking off the plastic shield and fan, wire tied a 120mm fan to the hs.

they're not under warranty unfortunatly, i think i'm going to have to do the same as you and attach some case fans and run the cards from the MB with some extenders to spread them out

1FCzN34C1xCLsDaLxfY7yB5CQKN74ruGHV
pekv2
Hero Member
*****
Offline Offline

Activity: 770
Merit: 502



View Profile
October 23, 2011, 07:51:00 PM
 #12

Should we all be oiling our fan bearings??

If your gfx card fan has an oil well, look no further > Lubricate Your Fan: Prepping a sleeve bearing fan for work . If it doesn't which in most cases the stock fan doesn't, well kinda screwed.
Cheeers - that's useful. I don't think any of mine look that sophisticated, but given that I've got a temperature monitoring system in place, if a fan starts to fail then there's *some* hope of rescuing the card with a new fan (potentially with higher performance).

Of course, given consumer electronics, it may cost less (esp. in terms of my time) to simply buy a new card...

You won't really be screwed, dunno y I said that... But, attaching a 120mm fan to the hs if the stock fan goes would be suffice. Oiling them increases the life of the fan if it can be oiled. I've got a few 4 year old 120mm fan, when I found that guide, I opened them 4 y/o fans up, they were bone dry. Hit it up with some oil, now they should last much longer.

does anyone know where I can get replacement fans from, I can't find any here in the UK and i don't want to get a full aftermarket cooler unless they are under £10. I don't mind ordering from abroard aslong as they are cheap

If you still have the warranty on your name, fill out a ticket form at xfx, they most likely will mail off a new fan to you, they mailed me like 5 of em, and each of em just ended up dieing within weeks. I ended up taking off the plastic shield and fan, wire tied a 120mm fan to the hs.

they're not under warranty unfortunatly, i think i'm going to have to do the same as you and attach some case fans and run the cards from the MB with some extenders to spread them out

Believe or not, doing this will increase the card to be cooler, just need to align the fan just right. Make sure air flow also hits the memory heatsinks. I was gonna post a photo of mine, camera is dead, I'll post a photo as a reference in a day, if you like.
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!