Blueman666
Member
Offline
Activity: 108
Merit: 10
|
|
March 13, 2014, 11:53:17 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
|
|
|
|
studio1one (OP)
|
|
March 13, 2014, 11:54:51 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
stock now all sold apart from a few.
|
BINTEX | | ● ● ● ● ● ● ●
| | | | ● ● ● ● ● ● ●
| | Powered by,
|
|
|
|
TookDk
Legendary
Offline
Activity: 1960
Merit: 1062
One coin to rule them all
|
|
March 13, 2014, 12:03:47 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
|
Cryptography is one of the few things you can truly trust.
|
|
|
Blueman666
Member
Offline
Activity: 108
Merit: 10
|
|
March 13, 2014, 12:40:44 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
You don't need the fan at all for scrypt only.
|
|
|
|
tertius993
|
|
March 13, 2014, 01:10:03 PM |
|
Thinking about getting a couple of these. What mining software are people using with these? Currently use bfgminer with my AntMiners and cgminer with GPU.
|
|
|
|
crackfoo
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
March 13, 2014, 01:18:42 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
You don't need the fan at all for scrypt only. really? I do find them fairly loud compared to my cubes. Would be nice if you didn't need it on....
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
PMB
Member
Offline
Activity: 109
Merit: 10
|
|
March 13, 2014, 01:39:53 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
If you have a lot then it gets NOISY.... I have 2 and on one the fan made a lot of noise, i cutted it out and inserted a new 80mm fan. Now it is silent and works great. As someone already said, if it is for scrypt only you don't need then fan and it gets only warm to the touch... for SHA you have to have the fan.. regards, P.
|
|
|
|
crackfoo
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
March 13, 2014, 01:41:27 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
If you have a lot then it gets NOISY.... I have 2 and on one the fan made a lot of noise, i cutted it out and inserted a new 80mm fan. Now it is silent and works great. As someone already said, if it is for scrypt only you don't need then fan and it gets only warm to the touch... for SHA you have to have the fan.. regards, P. interesting. I'm only using scrypt so maybe I'll try dropping the fan off.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
PMB
Member
Offline
Activity: 109
Merit: 10
|
|
March 13, 2014, 01:44:47 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
If you have a lot then it gets NOISY.... I have 2 and on one the fan made a lot of noise, i cutted it out and inserted a new 80mm fan. Now it is silent and works great. As someone already said, if it is for scrypt only you don't need then fan and it gets only warm to the touch... for SHA you have to have the fan.. regards, P. interesting. I'm only using scrypt so maybe I'll try dropping the fan off. If you are not certain that you want to use scrypt for the rest of your life then add a micro-switch to the cables and you can turn the fan on and off... regards, P.
|
|
|
|
Blueman666
Member
Offline
Activity: 108
Merit: 10
|
|
March 13, 2014, 05:15:18 PM |
|
I have a few questions: How noisy are the fan? How hot do they get? - do fan need to run at full speed? If not overcloking and running scrypt only
If you have a lot then it gets NOISY.... I have 2 and on one the fan made a lot of noise, i cutted it out and inserted a new 80mm fan. Now it is silent and works great. As someone already said, if it is for scrypt only you don't need then fan and it gets only warm to the touch... for SHA you have to have the fan.. regards, P. interesting. I'm only using scrypt so maybe I'll try dropping the fan off. If you are not certain that you want to use scrypt for the rest of your life then add a micro-switch to the cables and you can turn the fan on and off... regards, P. The fan in the gridseed only connects across the 12V supply so just unsolder or cut off close to the board. Should you want to refit the fan later you can just connect it to 12V (or 5V for a slower fan), no need to connect it internally again.
|
|
|
|
Blueman666
Member
Offline
Activity: 108
Merit: 10
|
|
March 14, 2014, 02:08:27 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
stock now all sold apart from a few. How many is a few? I would like to order some more.
|
|
|
|
studio1one (OP)
|
|
March 14, 2014, 07:26:50 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
stock now all sold apart from a few. How many is a few? I would like to order some more. Out of stock for now, doing a stock reconcile today against orders, we last did it on Wednesday and sometimes the cart software can go a little screwy so we don't want to oversell. I think we still have around 8 left but will update when we have reconciled. Also we have some bank transfer orders pending payment from last week that I think people aren't going to confirm so some more stock may become available from there. Going to email everyone who ordered bank transfer more than 5 working days ago and we haven't received funds today Will be paying for round 3 today and will open on Monday when delivery schedule is confirmed.
|
BINTEX | | ● ● ● ● ● ● ●
| | | | ● ● ● ● ● ● ●
| | Powered by,
|
|
|
|
ShopemNL
Legendary
Offline
Activity: 1025
Merit: 1001
|
|
March 14, 2014, 07:59:20 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
stock now all sold apart from a few. How many is a few? I would like to order some more. Out of stock for now, doing a stock reconcile today against orders, we last did it on Wednesday and sometimes the cart software can go a little screwy so we don't want to oversell. I think we still have around 8 left but will update when we have reconciled. Also we have some bank transfer orders pending payment from last week that I think people aren't going to confirm so some more stock may become available from there. Going to email everyone who ordered bank transfer more than 5 working days ago and we haven't received funds today Will be paying for round 3 today and will open on Monday when delivery schedule is confirmed. I payd my order (287) today with bank for the 20 Gridseeds, please let me know when you got them controller boards on stock again.
|
|
|
|
markusvon
Newbie
Offline
Activity: 29
Merit: 0
|
|
March 14, 2014, 08:49:48 AM |
|
Checked your website, guess you are all out of stock now ;(
|
|
|
|
vanycon
Sr. Member
Offline
Activity: 317
Merit: 252
In Rarity I trust!
|
|
March 14, 2014, 10:45:11 AM |
|
Any news regarding to shipping? (:
|
Aeron 1.250.000 CryptoBonusMiles Giveaway
|
|
|
Mymine
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 14, 2014, 12:25:22 PM |
|
Also wondering about shipping (order 271)
|
|
|
|
studio1one (OP)
|
|
March 14, 2014, 12:37:32 PM |
|
Goods have shipped from China with ups www.ups.com1z8837110460139668 all those that ordered direct from China shipping should receive them by Monday. The main package should be here Monday and with customers 2-3 days after.
|
BINTEX | | ● ● ● ● ● ● ●
| | | | ● ● ● ● ● ● ●
| | Powered by,
|
|
|
|
ShopemNL
Legendary
Offline
Activity: 1025
Merit: 1001
|
|
March 15, 2014, 06:48:56 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
stock now all sold apart from a few. Can you confirm my order will be sent?
|
|
|
|
studio1one (OP)
|
|
March 15, 2014, 08:09:29 AM |
|
Your front page of this thread says 10 units for £1300 but I cant seem to get that rate on the website, only £1400 and that comes up as out of stock. Will it be changed soon?
stock now all sold apart from a few. Can you confirm my order will be sent? Of course, all orders placed will be filled.
|
BINTEX | | ● ● ● ● ● ● ●
| | | | ● ● ● ● ● ● ●
| | Powered by,
|
|
|
|
HackaB321
|
|
March 15, 2014, 03:37:44 PM |
|
Hi I'm interested to buy 3 or 4 units. In this case:
1) Can I order 3 (or 4) "Gridseed Dual ASIC with accessories" (each one with its power supply) or it's better if I order one 12V 30A switching DC power supply in place of the 3/4 single 60w ps?
2)The control board is not necessary if I connect directly the usb hub to my pc. Correct?
Thanks
|
|
|
|
|