[ANN] CryptoMETH [METH] SHA-3 Keccak, News and update!

[Gorbash]

KGW at work...diff 51.5k yehey

I think ppl like this Meth 

[fartbags]

KGW wrecks all the initial fun for miners

[ibidem]

MVYir3nvFyW8qoYWzoneWXBSF1e3gcgz7y

I simply cannot mine that with the syntax provided for cudaminer.
Congratulations on smooth launch though. I will surely keep an eye on cryptometh just like German investors have been keeping an eye on PolishCoin.

[_Heisenberg_]

PLEASE SPREAD YOUR POWER OVER POOLS!!

[fartbags]

only 32 blocks found!

This is going to be a rare coin... except for the 0.9% premine. I hope people are watching what it is used for.

[HwM]

Does anybody have a .bat file for a r9 290 for me? I'll take a R9 280x as well...
Don't think i'm getting the hash rate i'm supposed to, first keccak coin for me. Tweaked my rig for scrypt previously...

[jamieebotwin]

GPU Will not work for this coin?

Try this miner. I do not know if it has viruses or not...

http://cryptomining-blog.com/704-download-cgminer-3-7-2-3-with-keccak-support-for-maxcoin-mining-for-windows/


Then use the cgminer.conf


Done... not so hard.

Thanx

[Xardas2014]

MVYir3nvFyW8qoYWzoneWXBSF1e3gcgz7y

I simply cannot mine that with the syntax provided for cudaminer.
Congratulations on smooth launch though. I will surely keep an eye on cryptometh just like German investors have been keeping an eye on PolishCoin.

lulz

[Litoshi]

My rig, with 4@290 amd gpu is pushing 400+MB per card, for 1700MH...... half of standard Scrypt coins.

Hashfever shows me at 234562481.  The hash rates are way off, obviously

[jamieebotwin]

How long will the pool Take to show my worker? Nothing yet, but miner is hashing and getting shares

[mikeyfinn]

My rig, with 4@290 amd gpu is pushing 400+MB per card, for 1700MH...... half of standard Scrypt coins.

Hashfever shows me at 234562481.  The hash rates are way off, obviously

Why dont people pay attention? Look again. Scrypt hash 2 mhs == keccak hash ~950 MHS, not Khs

[kache]

My rig, with 4@290 amd gpu is pushing 400+MB per card, for 1700MH...... half of standard Scrypt coins.

Hashfever shows me at 234562481.  The hash rates are way off, obviously

Look better, it's 400MH/s, not 400KH/s. 500 times higher, not half.

[jamieebotwin]

What does failed Null mean on cg miner? that must be why the pool still does not show my worker? But the miner is showing Lots of Accepted    Should I try a different pool??

[Prelektro]

I'm linux noob can anybody help me ? I did all until the last line, when I type "  ./cgminer --keccak -o pooladdress:port -u user -p pass  "  part, nothing happens. I'm using B.A.M.T. 1.5

help please i checked; it says gpu mining and keccak enabled but nothing happens after typing " ./cgminer --keccak -o stratum+tcp://meth-stratum.hashfever.com:3277 -u Prelektro.1 -p x " . How can i fix this or how can i learn what is wrong ?

[Gorbash]

I have 370MH/s on 280X and 460MH/s on my 290.
Keccak is epic. Stable as hell, less heat, less power. This has to be the future of coins.

[CHMinePeeR]

My rig, with 4@290 amd gpu is pushing 400+MB per card, for 1700MH...... half of standard Scrypt coins.

Hashfever shows me at 234562481.  The hash rates are way off, obviously

Similar problem here:

Hashfever shows me:

My Hashrate

263,882.79 MH/s

cgminer 3.7.3 shows me:

 (5s):1.400G (avg):1.458Gh/s | A:78368  R:0  HW:0  WU:322.8/m  WUE:0.0%

[wzttide]

Trade METH on https://www.swaphole.com/ now!

[CHMinePeeR]

I have 370MH/s on 280X and 460MH/s on my 290.
Keccak is epic. Stable as hell, less heat, less power. This has to be the future of coins.

can you please post your config?

[SharpNieSharp]

This is how should be always.

Max  Keiser should learn from these devs how to make FAIR start.

[jamieebotwin]

WTF, I can not get the CG Miner to show up in the pool, my BAT is right, but it is showing in The cgminer DIFFERENT INFO, NOT CORRECT FOR MY POOL