Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
October 25, 2018, 10:05:07 AM |
|
Same hashrate and decrease in temperature.
|
|
|
|
daniel232388
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 25, 2018, 11:32:58 AM Last edit: October 25, 2018, 10:01:56 PM by frodocooper |
|
Same hashrate and decrease in temperature.
my hash rate decreased slightly for some reason.....and my temperature too.
|
|
|
|
VTdude12
Member
Offline
Activity: 76
Merit: 10
|
|
October 25, 2018, 11:50:40 AM |
|
Hi all. Had success at first with this firmware, but my total hashrate has slowly dropped day-over-day...
In total I've gone from ~330 to ~310 as reported by Slush. Anyone else seeing this???
|
Block # 456099 & 515126 @ Slush 25 - S9 8 - D3 16 - L3+ 9 - 8x 1070 6 - 8x 1060 7 - 8x RX580 1 - 7x RX480 1 - 6x RX470
|
|
|
daniel232388
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 25, 2018, 12:35:01 PM Last edit: October 25, 2018, 10:02:27 PM by frodocooper |
|
Hi all. Had success at first with this firmware, but my total hashrate has slowly dropped day-over-day...
In total I've gone from ~330 to ~310 as reported by Slush. Anyone else seeing this???
yes....my hash rate has drop too. every s9 drop about 300 to 400gh. anyone else facing this
|
|
|
|
Shad0wSmurf
Jr. Member
Offline
Activity: 59
Merit: 10
|
|
October 25, 2018, 12:37:46 PM Last edit: October 25, 2018, 10:02:48 PM by frodocooper |
|
yes....my hash rate has drop too. every s9 drop about 300 to 400gh. anyone else facing this
It down clock's your volts so less hashrate
|
|
|
|
Gabrics
Full Member
Offline
Activity: 191
Merit: 121
Just digging around
|
|
October 25, 2018, 01:20:29 PM |
|
My hash rate is down about 1-2% average. Still a good result for 11-13% power down though.
|
|
|
|
VTdude12
Member
Offline
Activity: 76
Merit: 10
|
|
October 25, 2018, 02:11:56 PM |
|
Yea I'm aware of downlocking V, but I've now gone from ~330 TH to ~305 and seems to be going lower by the hour! That's almost 10% hashrate loss!
|
Block # 456099 & 515126 @ Slush 25 - S9 8 - D3 16 - L3+ 9 - 8x 1070 6 - 8x 1060 7 - 8x RX580 1 - 7x RX480 1 - 6x RX470
|
|
|
Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
October 25, 2018, 02:27:35 PM |
|
Where you see hashrate lose, on pool?
|
|
|
|
justinjja
Newbie
Offline
Activity: 44
Merit: 0
|
|
October 25, 2018, 02:54:51 PM |
|
My 13.5GH/s miners defaluted to 550mhz or like 11.5GH/s Anyone know what voltage/frequency I need to set to get back to 13.5?
Edit: I'm trying 634mhz, that is what one of my other miners is running at, Leaving the voltage unchanged for now. Seems to be working, getting 13.5gh/s again, and not seeing any errors.
Where are the fan settings?
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
October 25, 2018, 04:11:16 PM Last edit: October 25, 2018, 10:03:38 PM by frodocooper |
|
hi, do you experience lesser or slightly lower hashing on s9?
ok so after a bit wait I did update my farm partially 40 units for now and yes there's a change in power consumption but also in hashrate. Some of them even dropped from 13.8 to 12.5 almost about 10%, freqs are 2x627 and 640MHz, some of them dropped slightly lower rates I think they are still working on FW so let's wait and see
|
|
|
|
fanatic26_
|
|
October 25, 2018, 06:09:06 PM Last edit: October 25, 2018, 10:04:09 PM by frodocooper |
|
Now that I got my pool issue cleared up I have multiple miners running with lower consumption.
I am averaging a 200w savings on each machine and these are the hash rates after 24 hours (these are all on HP 2450w 94% efficiency server PSUs):
#1: 13.5TH s9 currently averaging 13.502 TH @ 1305w #2: 13.5TH s9 currently averaging 13.532 TH @ 1285w #3: 14.0TH s9 currently averaging 13.747 TH @ 1352w #4: 13.5TH s9 currently averaging 13.715 TH @ 1298w #5: 13.5TH s9 currently averaging 13.608 TH @ 1288w
I am going to throw the firmware on a couple more 14TH units and see if they lose any speed but so far all of my 13.5 TH units are at full speed if not a tiny bit more.
|
|
|
|
daniel232388
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 25, 2018, 06:36:35 PM Last edit: October 25, 2018, 10:04:29 PM by frodocooper |
|
Now that I got my pool issue cleared up I have multiple miners running with lower consumption.
I am averaging a 200w savings on each machine and these are the hash rates after 24 hours (these are all on HP 2450w 94% efficiency server PSUs):
#1: 13.5TH s9 currently averaging 13.502 TH @ 1305w #2: 13.5TH s9 currently averaging 13.532 TH @ 1285w #3: 14.0TH s9 currently averaging 13.747 TH @ 1352w #4: 13.5TH s9 currently averaging 13.715 TH @ 1298w #5: 13.5TH s9 currently averaging 13.608 TH @ 1288w
I am going to throw the firmware on a couple more 14TH units and see if they lose any speed but so far all of my 13.5 TH units are at full speed if not a tiny bit more.
hi, pls update us with your hash rate after 24 hours. as a lot of us are losing our hash rate. thanks
|
|
|
|
ccgllc
Copper Member
Full Member
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
|
October 25, 2018, 06:38:21 PM Last edit: October 25, 2018, 10:05:05 PM by frodocooper |
|
Running on 115 S9s now. I'm seeing about 15% in power savings, but the hash rate drops slowly over 24 hours until I'm at about a 6% hash loss (averaged across all the miners). Rebooting brings them back to full hash.
hi, pls update us with your hash rate after 24 hours. as a lot of us are losing our hash rate. thanks
He said those were his 24 hour numbers...
|
Mined for a living since 2017. Dabbled for years before that. Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
October 25, 2018, 06:39:47 PM Last edit: October 25, 2018, 10:06:20 PM by frodocooper |
|
Running on 115 S9s now. I'm seeing about 15% in power savings, but the hash rate drops slowly over 24 hours until I'm at about a 6% hash loss (averaged across all the miners). Rebooting brings them back to full hash.
Still dropping back down though? Mine is doing the same, reboot, hash up but steadily declines. Is this a mem leak? Or maybe fixing the frequency?
|
|
|
|
daniel232388
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 25, 2018, 06:48:34 PM Last edit: October 25, 2018, 10:05:49 PM by frodocooper |
|
He said those were his 24 hour numbers...
ooopss yes....its 24 hours. but mine is dropping steadily...lol. rebooting helps but drops again...steadily too. not sure whats the problem or any solutions.
|
|
|
|
ccgllc
Copper Member
Full Member
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
|
October 25, 2018, 08:05:27 PM Last edit: October 25, 2018, 10:06:50 PM by frodocooper |
|
Still dropping back down though? Mine is doing the same, reboot, hash up but steadily declines.
Is this a mem leak? Or maybe fixing the frequency?
I've coded a twice a day reboot into Awesome Miner which is a patch, but should keep me from suffering too badly. I've asked Patrik to let us reboot based on a % of max hashrate, but such things can take awhile.
|
Mined for a living since 2017. Dabbled for years before that. Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
|
|
|
Hockeybum
Member
Offline
Activity: 113
Merit: 31
|
|
October 25, 2018, 09:06:20 PM Last edit: October 25, 2018, 09:16:31 PM by Hockeybum |
|
Is everyone running Nov 17 auto-tune firmware with the LPM patch or is there a variety of firmware that causes the same result of decaying hash rate? Also for CCG or others who are able to use the 10/22 LPM patch are you running the 10/22 or 10/23 LPM update?
|
|
|
|
fanatic26_
|
|
October 25, 2018, 09:24:44 PM |
|
The November firmware is the worst bitmain has ever released for the s9, I do not run it on my machines. non stop PIC flash errors and other weird problems. I have both the 10/22 and 10/23 fw running and I am seeing no difference. I will update again tomorrow and see what has changed.
|
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2226
Merit: 2376
EIN: 82-3893490
|
|
October 25, 2018, 11:04:48 PM |
|
Is everyone running Nov 17 auto-tune firmware with the LPM patch or is there a variety of firmware that causes the same result of decaying hash rate? Also for CCG or others who are able to use the 10/22 LPM patch are you running the 10/22 or 10/23 LPM update?
what do you mean? doesnt the 10/23 firmware completely replace the prior version? I dont think they both are being used once you update to the LPM version. The November firmware is the worst bitmain has ever released for the s9, I do not run it on my machines. non stop PIC flash errors and other weird problems. I have both the 10/22 and 10/23 fw running and I am seeing no difference. I will update again tomorrow and see what has changed.
I have had no issues at all with the November firmware - other than when the miners get cleaned, they have run nonstop since April with zero issues. I am currently using the 10/23 firmware as well right now. I dont have a way to measure the power consumption yet but I will for sure the difference in my next electric bill. I need to get inline meter set up asap as well.
|
|
|
|
ccgllc
Copper Member
Full Member
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
|
October 25, 2018, 11:16:14 PM Last edit: October 26, 2018, 11:37:20 AM by frodocooper |
|
This is amusing: I put a new controller into one of my early batch (maybe batch 1) S9s (12.93 rated TH), upgraded to 1023, and pushed it until I started seeing issues, then backed down a bit. e.g. It has serious problems at 750, but not 725. No other changes, no voltage tweaks, etc. Basically those early models rock.
|
Mined for a living since 2017. Dabbled for years before that. Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
|
|
|
|