MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each

[JoostB]

CGMiner is a very messy program, it is a wonder it does work.
It's like all the other Linux stuff, to many people have put their fingers on it.

[james42]

Well Inno were very rude, I said "Hello" on Skype and they just said "Who are you?". I'm getting sick of all these rude people everywhere, does nobody have any manners or values anymore?

[Ibisy]

There is also Minera that supports the G-Blade with sandor111's CPUminer. It's a very nice interface too

https://github.com/michelem09/minera

Thanks for pointing this out  After +13 hours i get this:

https://i.imgur.com/nLzlwdY.gif

I still think speed is to low and i also get way to many HW errors  I know it's just arround 1Mh/s but I'm 1Mh/s short of the ideal speed and that's 0.001 BTC * 30 days less per month and i'm not sure if MinerEU can replace my G-Blade of if this is cover by the warranty. Also, not a fan of paying for the return shipping 

[james42]

Looks dodgy to me. See if MinerEU will respond to you.

What do you think of Minera?

[Ibisy]

Looks dodgy to me. See if MinerEU will respond to you.

Yes it does look dodgy   I think one or two chips are not working. I could try to lower the temperature but i'm almost sure it's not going to solve anything. Also the track record for MinerEU to respond to emails is very bad right now. But i need to solve this 

What do you think of Minera?

It looks very good to be honest. Many thanks for the tip   Btw, is there a way to check if all the 40 chips on each blade are working?

[james42]

That I don't know I'm afraid

[JoostB]

The hash rate seems way to low. I've had a g-blade in the past and it was always hoovering between 5.2 and 5.6 Mh/s.
This was with cpu-miner from sandor111, auto tuning enabled, default clock 850 MHz.
I don't remember the number of hardware errors exactly, but it was low, somewhere in the region of 1.5% or less.

Strange thing is that both of your blades are under performing. Maybe the problem is not in the g-blade but somewhere else.



 

[james42]

Actually that reminds me search on here for the autotuning feature in Minera. That might help you nail down the problem.

[JoostB]

Looks dodgy to me. See if MinerEU will respond to you.

Yes it does look dodgy   I think one or two chips are not working. I could try to lower the temperature but i'm almost sure it's not going to solve anything. Also the track record for MinerEU to respond to emails is very bad right now. But i need to solve this

What do you think of Minera?

It looks very good to be honest. Many thanks for the tip   Btw, is there a way to check if all the 40 chips on each blade are working?

When you run cpu-miner in a console window, it shows the shares, and from which blade and chip number they came.
Watching this you can easily check if there is a chip not working.
Maybe you can send the output from cpu-miner to a log file when running under minera, I don't know if this works.
 

[Ibisy]

The hash rate seems way to low. I've had a g-blade in the past and it was always hoovering between 5.2 and 5.6 Mh/s.
This was with cpu-miner from sandor111, auto tuning enabled, default clock 850 MHz.
I don't remember the number of hardware errors exactly, but it was low, somewhere in the region of 1.5% or less.

Acording to this link http://cryptomining-blog.com/tag/cpuminer-sandor111/ minera uses the sandor111 cpu-miner. I'm going to try the 850 MHz for a few hours and see how it's goes.

Strange thing is that both of your blades are under performing. Maybe the problem is not in the g-blade but somewhere else.

That already crossed my mind. I have one friend that got one G-Blade and he already agreed to let me test mine on is setup and using his on my setup. Also i will try the autotune  and i think i can output the log file to see if anything pops up

Thank you JoostB and James42 for your help  

[VictorBC]

Today is the day that would send teams MInerEU. And still the silence. So difficult is to have informed customers like going all ...

I do not understand. truth. 

[JPS2K5]

Well Inno were very rude, I said "Hello" on Skype and they just said "Who are you?". I'm getting sick of all these rude people everywhere, does nobody have any manners or values anymore?

Might just be that over 1000 strange people bother them on Skype. Could be anything. At any rate, I'm sure that if they had an updated 'official' Pi image, I would hear about it 

[james42]

Don't give a crap about the Pi image, I just want an updated cgminer 

[JoostB]

The miner that was working for me at Waffle Pool seems to be dead.
I'm very unhappy about the whole situation.

[ShopemNL]

Do you have firmware image for the Zeus 13-15MH/s miner?

[JoostB]

Do you have firmware image for the Zeus 13-15MH/s miner?

There is no real firmware, only a PI image with cgminer.

[JoostB]

You can download it from Zeus or from Hashra.

There also seems to be something called starminer, but I never tried that one.

[ShopemNL]

Do you have firmware image for the Zeus 13-15MH/s miner?

There is no real firmware, only a PI image with cgminer.

Where can i find that? Or can i copy image from the A2 MINI? (read: Scripta)

[JoostB]

http://hashra.com/support/
http://zeusminer.com/user-manual-ver-1-0/

[james42]

I have asked how to get a refund