it will allow me to do testing in house before I bring to clifton nj
and i will be able to go well over 3000 watts with no issues.
The m20 is in the house doing its tuning
and it is up doing 69 th
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FeCIlM3M.png&t=663&c=KV-hO4EPkgTu3Q)
Multiple issues abound.
I could not find it on my d-link router. Address of that router is 192.168.0.1 I have 20 pieces of gear on it.
Must be a conflict I moved it to my trendnet router
Address 192.168.10.1
Put a pc on it and found the gear.
other issue is it has a firmware error for low speed only runs high speed.
low speed generates error 201 p20 not found in cgminer.
@ frodo can you merge my thread into this one.
https://bitcointalk.org/index.php?topic=5126286.0i just locked it.
so this gear is loud 80-84 db
not super high pitched but loud.
it only runs full speed.
I had an issue with my router d-link router 192.168.0.1
but my trend net router 192.168.10.1 was fine as i only have 1 pc 1 miner 1 router on it so no conflicts.
seems to run at 68.8 th temps are 72 c
will give a power readout.
very soon.
2.02 kwatts
3.17 kwatts
1.15 kwatts in 20 minutes test x 3 = 3.45 kwatt or 3,450 watts so 3450/68900 = 50.07 watts a th.
tired will be shut this off due to noise will do a movie or 2 on it.
This is complex call to say it is better then the s17 or worse since I don't have working slow speed firmware.
my new meter does kwatts
I am doing a 1 hour test.
I was at 6.06 kwatts
after 1 hour I am at 9.43 kwatts
that is 3.370 or 3370/68.6 = 49.12 watts a gh which is close to last nights test of 50.007 watts a th
here is a gui screenshot 68.6th
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FKIqH6fF.png&t=663&c=fAXguTXnjPU_6w)
this is too long of a post
here is a youtube link for unboxing
your video can be found at
https://youtu.be/wpyIHm9Z6BEhere it is up and running it is set into a sound proof setup so you do not get to see a good view of it in this video
Your video will be live at:
https://youtu.be/jnkELiOSYu4