DavinciJ15
|
|
November 09, 2011, 03:13:46 PM Last edit: November 14, 2011, 06:37:32 PM by DavinciJ15 |
|
I thought you couldn't run rc3 because of? [05:25:51.758] Realm resolved null for key: ms2.nmcbit.com:9098/ Realm: jsonrpc 722 [shared-httpclient-38] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [05:25:51.758] RETRY [05:25:51.760] getblocknumber response status: 401 for url: http://ms2.nmcbit.com:8337/ No, 3 worked fine I was just pointing the above out, I had problems at first but I mentioned I fixed them in another post. However after rolling back to 3 it worked for a while and now stopped working for some reason not sure why when It was working all night long.
|
|
|
|
cablepair
|
|
November 09, 2011, 06:24:55 PM |
|
Hi
I am also upgrading to 0.40rc1 can someone explain : source.local.1.p2p.hostport=localhost:8373 and what this does?
thanks
|
|
|
|
urstroyer
|
|
November 09, 2011, 06:52:39 PM |
|
Hi
I am also upgrading to 0.40rc1 can someone explain : source.local.1.p2p.hostport=localhost:8373 and what this does?
thanks
Yep: thats the port where bitcoind connects to the network (default: 8333, if you doesn't change the port in your Bitcoin.conf).
|
|
|
|
cablepair
|
|
November 09, 2011, 07:15:08 PM |
|
thanks for the response. Do I need bitcoind 0.50 for this to work properly? I have setup pushpool successfully quite a few times, this is my first attempt with poolserverj and I got it running but am having a hard time [11:17:53.891] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177913 [shared-httpclient-88] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [11:17:53.891] RETRY [11:17:53.892] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177914 [shared-httpclient-63] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [11:17:53.892] RETRY [11:17:53.893] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177915 [shared-httpclient-69] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [11:17:53.893] RETRY [11:17:53.903] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.903] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177927 [shared-httpclient-105] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc anyone got any ideas for me? thanks!!!
|
|
|
|
urstroyer
|
|
November 09, 2011, 07:26:07 PM |
|
thanks for the response. Do I need bitcoind 0.50 for this to work properly? I have setup pushpool successfully quite a few times, this is my first attempt with poolserverj and I got it running but am having a hard time [11:17:53.891] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177913 [shared-httpclient-88] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [11:17:53.891] RETRY [11:17:53.892] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177914 [shared-httpclient-63] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [11:17:53.892] RETRY [11:17:53.893] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177915 [shared-httpclient-69] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [11:17:53.893] RETRY [11:17:53.903] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.903] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] getblocknumber response status: 401 for url: http://localhost:8330/[11:17:53.904] Realm resolved null for key: localhost:8331/ Realm: jsonrpc 177927 [shared-httpclient-105] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc anyone got any ideas for me? thanks!!! You need a bitcoind with getmemorypool rpc call. Grab version 0.5 here https://github.com/bitcoin/bitcoin or apply an existing getmemorypool patch to a previous version.
|
|
|
|
DavinciJ15
|
|
November 09, 2011, 08:13:31 PM |
|
RC3 works fine now. After rolling back to an older settings file I will do more testing.
On a side note I would like to add a feature request... Where do I add those again?
Anyhow my request is to accept Tx that should have a fee because of the size but do not because the user recoded bitcoin or namecoin to send out a Tx without a fee. I want to create a zero fee node. Also a there should be a max number of illegal zero fee tx that it will include into the next block if possible.
This feature request can be done at your leisure. If you (shadders) are wondering why I would want this msg me on the IRC and I will tell you.
Cheers
Davinci
|
|
|
|
cablepair
|
|
November 09, 2011, 09:23:31 PM |
|
yeah I think I fixed all my problems simply by compiling a new namecoind and bitcoind 0.5
|
|
|
|
ThiagoCMC
Legendary
Offline
Activity: 1204
Merit: 1000
฿itcoin: Currency of Resistance!
|
|
November 10, 2011, 09:17:03 AM |
|
Guys, Just a newbie question: Is it possible to create a pool with merged-mining enabled for: Bitcoin, Namecoin and Litecoin? As a miner, do I still need CGMiner, for Bitcoin/Namecoin and Minerd for Litecoin?! Also, I would like to first, start just a Litecoin pool, with merged-mining disabled... So, can you guys provide at the final poolserverj-0.4.0.tar.gz a conf-example for each chain isolated and, a conf-example for merged-mining enabled for the 3 chains (BTC/NMC/LTC)? For the web interface, is there only Simplecoin and Coinmines with PSJ support out there?! I like mmcFE very much... Best! Thiago
|
|
|
|
eleuthria
Legendary
Offline
Activity: 1750
Merit: 1007
|
|
November 10, 2011, 11:11:01 AM |
|
Testing of the new build is going great for BTC Guild. Took a bit of tinkering after you first launched, but the bug fixes we found definitely seem to be going smooth. Looking hopeful for full deployment at BTC Guild this weekend! Just waiting on a valid namecoin block to be generated before I attempt a push to live.
|
RIP BTC Guild, April 2011 - June 2015
|
|
|
shads (OP)
|
|
November 10, 2011, 11:26:13 AM |
|
Guys, Just a newbie question: Is it possible to create a pool with merged-mining enabled for: Bitcoin, Namecoin and Litecoin? As a miner, do I still need CGMiner, for Bitcoin/Namecoin and Minerd for Litecoin?! Also, I would like to first, start just a Litecoin pool, with merged-mining disabled... So, can you guys provide at the final poolserverj-0.4.0.tar.gz a conf-example for each chain isolated and, a conf-example for merged-mining enabled for the 3 chains (BTC/NMC/LTC)? For the web interface, is there only Simplecoin and Coinmines with PSJ support out there?! I like mmcFE very much... Best! Thiago Litecoin is not merged mining capable as far as I know. And even if it was you wouldn't be able share hashes as it uses SCrypt proof work instead double sha256. You'd be able to run a scrypt chain merged mining group and sha merged mining group in separate poolerverj instances but not combined into one.
|
|
|
|
cablepair
|
|
November 10, 2011, 01:19:58 PM |
|
I thought you couldn't run rc3 because of? [05:25:51.758] Realm resolved null for key: ms2.nmcbit.com:9098/ Realm: jsonrpc 722 [shared-httpclient-38] WARN org.eclipse.jetty.util.log - Unknown Security Realm: jsonrpc [05:25:51.758] RETRY [05:25:51.760] getblocknumber response status: 401 for url: http://ms2.nmcbit.com:8337/ No, 3 worked fine I was just pointing the above out, I had problems at first but I mentioned I fixed them in another post. However after rolling back to 3 it worked for a while and now stopped working for some reason not sure why when It was working all night long. I am having this exact same error, anyone know the fix for it?
|
|
|
|
shads (OP)
|
|
November 10, 2011, 02:17:43 PM |
|
which RC are you using?
Depending on which you can try putting in the ip address instead of hostname
|
|
|
|
shads (OP)
|
|
November 10, 2011, 02:33:37 PM |
|
just posted rc5 mini binary. It should fix this issue: [06:07:45.255] Exception in Cleaner Thread java.lang.NullPointerException at com.shadworld.poolserver.workmaker.WorkMaker.update(WorkMaker.java:178) at com.shadworld.poolserver.source.merged.MergedMiningGroup.updateAuxes(MergedMiningGroup.java:249) at com.shadworld.poolserver.Cleaner.run(Cleaner.java:54) There is a problem currently with namecoin blocks being rejected by the namecoind. I won't be able to follow this up in detail until tomorrow. Of course it worked perfectly in test environment but things are different out in the wild I guess...
|
|
|
|
cablepair
|
|
November 10, 2011, 03:29:26 PM |
|
thanks so much for all your support shads, I will be sure to send a donation once I get this working It looks a lot better now but I still can't connect miners PoolServerJ Service Finished Thu Nov 10 07:23:51 PST 2011 [07:23:51.700] RETRY [07:23:51.703] RETRY [07:23:51.719] New Block detected [152716] from source: DaemonSource[bitcoind-mm].bitcoin - 0 lagging sources. [07:23:51.735] New Block detected [27224] from source: DaemonSource[bitcoind-mm].namecoin - 0 lagging sources. [07:23:51.736] Restoring workmap from file: /home/smart/Downloads/poolserverj-0.4.0rc2/tmp/workmap-8332.bin [07:23:55.682] Exception in Cleaner Thread java.lang.NullPointerException at com.shadworld.poolserver.workmaker.WorkMaker.update(WorkMaker.java:180) at com.shadworld.poolserver.source.merged.MergedMiningGroup.updateAuxes(MergedMiningGroup.java:249) at com.shadworld.poolserver.Cleaner.run(Cleaner.java:54) [07:24:08.689] Checking for previously failed share commits. [07:24:10.738] Exception in Cleaner Thread java.lang.NullPointerException at com.shadworld.poolserver.workmaker.WorkMaker.update(WorkMaker.java:180) at com.shadworld.poolserver.source.merged.MergedMiningGroup.updateAuxes(MergedMiningGroup.java:249) at com.shadworld.poolserver.Cleaner.run(Cleaner.java:54) [07:24:18.704] Checking for previously failed share commits. only [07:24:28.720] Checking for previously failed share commits. [07:24:38.735] Checking for previously failed share commits. [07:24:43.936] Retrieving worker from database: test1 [07:24:48.753] Checking for previously failed share commits. [07:24:58.768] Checking for previously failed share commits. [07:25:08.784] Checking for previously failed share commits.
What is this Exception in Cleaner Thread and is it what is preventing mining from connecting? looks like its connecting to rpcs [07:23:51.719] New Block detected [152716] from source: DaemonSource[bitcoind-mm].bitcoin - 0 lagging sources. [07:23:51.735] New Block detected [27224] from source: DaemonSource[bitcoind-mm].namecoin - 0 lagging sources.
it tries to retrieve worker from database... [07:24:43.936] Retrieving worker from database: test1
but cgminer does not connect ;/
|
|
|
|
shads (OP)
|
|
November 10, 2011, 03:40:31 PM |
|
yes the problem is that the jsonrpc client is null... something must be going wrong when it's initialised. Is that with rc5? If so can you send me yr psj properties file. Just paste it into a PM but don't forget to blank your passwords.
|
|
|
|
cablepair
|
|
November 10, 2011, 06:21:55 PM |
|
ok I have narrowed this down a bit I have poolserverj Up and running I can connect to the rpc via firefox with a user/pass from the database but its not giving work check this out { "error": { "code": -31001, "message": "No work available" }, "id": 1, "result": null }
any help would be amazingly appreciated!
|
|
|
|
shads (OP)
|
|
November 10, 2011, 10:58:15 PM |
|
Well I know there's still some glitches being ironed out but we at least have confirmation of real blocks now, both for bitcoin and namecoin $cd ~ $tail -c 100000000 ../.bitcoin/blk0001.dat | strings -n 3 | grep BTC Mined by BTC Guild Mined by BTC Guild Mined by BTC Guild $tail -c 100000000 ../.namecoin/blk0001.dat | strings -n 3 | grep BTC BTC Mined by BTC Guild Mined by BTC Guild Mined by BTC Guild Mined by BTC Guild Mined by BTC Guild Mined by BTC Guild Mined by BTC Guild BTC Guild
|
|
|
|
Retard
Prime Minister
VIP
Sr. Member
Offline
Activity: 448
Merit: 252
|
|
November 11, 2011, 12:36:17 AM |
|
ok know all running but i dont understand whos testnet works ... surfe name coin and bitcoin testnet=1 and poolserverj config testnet =true but poolserverj after them didnt started .... any idea whats wrong ?
|
|
|
|
shads (OP)
|
|
November 11, 2011, 12:49:12 AM |
|
ok know all running but i dont understand whos testnet works ... surfe name coin and bitcoin testnet=1 and poolserverj config testnet =true but poolserverj after them didnt started .... any idea whats wrong ? If you want help you need to give me more useful information than 'didnt start'. What was the error message? In this case I can probably guess, you've got production net payout addresses so it's failing address validation. If you're using the latest rc5 I've added a feature to make switching between testnet/mainnet easier. All the places where you set a payout address you can add a second entry with '.testnet' appended to the property name. e.g. source.local.1.localWorkGeneration.payoutAddress=1LezqRatQz7MeNoCVziYwcdwtqeEbvrdAq ### this allows you define a testnet address so you don't have to keep ### changing it when you switch to testnet source.local.1.localWorkGeneration.payoutAddress.testnet=mnn7vBgZgbCXMDts7zFf4xqEpiBWfMEQmQ psj will pick the appropriate one depending on whether you're on testnet or not
|
|
|
|
shads (OP)
|
|
November 11, 2011, 12:53:19 AM |
|
If anyone is getting rejected NMC blocks it's proven to work on production network without namecoin coinbasing. e.g. comment out this line: #source.local.1.merged.namecoin.localCoinbasing=true I will figure out what the problem is this weekend but that should get you going in the meantime..
|
|
|
|
|