akokkon
Newbie
 Offline
Activity: 15
Merit: 0
|
 |
April 29, 2019, 01:34:27 PM |
|
as i wrote before the gpuinfo prints the same results before and after algo_specific _oc
Does it show nvidia-settings applying OC values after miner restart on gnome-terminal? Please set OVERCLOCK_MODE to " NO", "GLOBAL" and "ALGO_SPECIFIC" with different values. Restart NVOC after editing 1bash with: bash ~/NVOC/mining/nvOC restart
Check if gnome-terminal shows nvidia-settings applying OC values or not Run report command after every nvOC restart and post results. bash ~/NVOC/mining/nvOC report
Report generator for nvOC v0019-3.2 v0012
Operating System info:
Kernel : 4.4.0-138-generic
OS : Ubuntu 16.04.5 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10)
nvidia driver : 410.78
nvOC info:
nvOC path : /home/m1/NVOC/mining
nvOC : 0019-3.2
Report : 0012
1bash : 0058
1bash.template: 0058
3main : 0028
5watchdog : 0024
6tempcontrol : 0012
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0013
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3735200 kB
Mem Free : 1130092 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
CUDA SDK version
nvcc path : /usr/local/cuda/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2018 NVIDIA Corporation
Built on Tue_Jun_12_23:07:04_CDT_2018
Cuda compilation tools, release 9.2, V9.2.148
nvoc.service systemd's log
● nvoc.service - nvOC Service
Loaded: loaded (/etc/systemd/system/nvoc.service; enabled; vendor preset: enabled)
Active: inactive (dead)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 14.3G disk 1 1 usb SanDisk Ultra Fit 1.00
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 14.3G ext4 part 1 1 /
VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
Local git branch and submodules status:
## release...origin/release
M 3main
+8baabf41eacfbcb5d0e3aa8db0e94289c91e516a miners (heads/3.2-miners)
## HEAD (no branch)
1bash settings:
1bash version .............: 0058
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 20
GPU Utilization Threshold .: 70
Alternate Pool ............: NO
Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 60
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 38
MAXIMAL_FAN_SPEED .........: 90
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 30
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO
POWERLIMIT MODE ...........: GLOBAL
Power Limit WATTS .........: 110
OVERCLOCK MODE ............: GLOBAL
Memory Overclock ..........: 1000
Core Overclock ............: 100
GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: nv074
plusCPU ...................: NO
AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: AION;BTCZ;BTG;NICE_LYRA2REV3;NICE_X16R;RVN;XMN;ZEL
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: ZEL
ALGO ......................: ZHASH
MINER .....................: GMINER
ZEL WORKER ................: nv074
ZEL ADDRESS ...............: t1VPYLF9...
ZEL POOL ..................: zel-eu.coinblockers.com
ZEL PORT ..................: 4446
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the tags. This will ensure proper alignment when posting the Report. ID | PS | T° | FAN | LOAD | POWER / LIMIT / MAX | GPUCLOCK | MEMCLOCK | VENDOR - MODEL 0 | P2 | 63 | 37 | 100 | 91 / 110 / 110 | 1556 | 3802 | ZOTAC - GeForce GTX 1070 1 | P2 | 64 | 41 | 100 | 111 / 110 / 110 | 1531 | 3802 | ZOTAC - GeForce GTX 1070 2 | P2 | 62 | 43 | 100 | 105 / 110 / 110 | 1506 | 3802 | GIGABYTE - GeForce GTX 1070 3 | P2 | 58 | 36 | 100 | 106 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070 4 | P2 | 63 | 43 | 100 | 110 / 110 / 110 | 1518 | 3802 | GIGABYTE - GeForce GTX 1070 5 | P2 | 60 | 39 | 100 | 112 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070 6 | P2 | 59 | 36 | 100 | 111 / 110 / 110 | 1531 | 3802 | GIGABYTE - GeForce GTX 1070 7 | P2 | 67 | 49 | 100 | 107 / 110 / 110 | 1885 | 3802 | GIGABYTE - GeForce GTX 1060 3GB --------------------- the problem remains... |
|
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
April 30, 2019, 05:40:04 AM
Last edit: April 30, 2019, 09:25:24 AM by papampi |
|
as i wrote before the gpuinfo prints the same results before and after algo_specific _oc
Does it show nvidia-settings applying OC values after miner restart on gnome-terminal? Please set OVERCLOCK_MODE to " NO", "GLOBAL" and "ALGO_SPECIFIC" with different values. Restart NVOC after editing 1bash with: bash ~/NVOC/mining/nvOC restart
Check if gnome-terminal shows nvidia-settings applying OC values or not Run report command after every nvOC restart and post results. bash ~/NVOC/mining/nvOC report
Report generator for nvOC v0019-3.2 v0012
Operating System info:
Kernel : 4.4.0-138-generic
OS : Ubuntu 16.04.5 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10)
nvidia driver : 410.78
nvOC info:
nvOC path : /home/m1/NVOC/mining
nvOC : 0019-3.2
Report : 0012
1bash : 0058
1bash.template: 0058
3main : 0028
5watchdog : 0024
6tempcontrol : 0012
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0013
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3735200 kB
Mem Free : 1130092 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
CUDA SDK version
nvcc path : /usr/local/cuda/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2018 NVIDIA Corporation
Built on Tue_Jun_12_23:07:04_CDT_2018
Cuda compilation tools, release 9.2, V9.2.148
nvoc.service systemd's log
● nvoc.service - nvOC Service
Loaded: loaded (/etc/systemd/system/nvoc.service; enabled; vendor preset: enabled)
Active: inactive (dead)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 14.3G disk 1 1 usb SanDisk Ultra Fit 1.00
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 14.3G ext4 part 1 1 /
VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
Local git branch and submodules status:
## release...origin/release
M 3main
+8baabf41eacfbcb5d0e3aa8db0e94289c91e516a miners (heads/3.2-miners)
## HEAD (no branch)
1bash settings:
1bash version .............: 0058
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 20
GPU Utilization Threshold .: 70
Alternate Pool ............: NO
Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 60
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 38
MAXIMAL_FAN_SPEED .........: 90
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 30
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO
POWERLIMIT MODE ...........: GLOBAL
Power Limit WATTS .........: 110
OVERCLOCK MODE ............: GLOBAL
Memory Overclock ..........: 1000
Core Overclock ............: 100
GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: nv074
plusCPU ...................: NO
AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: AION;BTCZ;BTG;NICE_LYRA2REV3;NICE_X16R;RVN;XMN;ZEL
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: ZEL
ALGO ......................: ZHASH
MINER .....................: GMINER
ZEL WORKER ................: nv074
ZEL ADDRESS ...............: t1VPYLF9...
ZEL POOL ..................: zel-eu.coinblockers.com
ZEL PORT ..................: 4446
ID | PS | T° | FAN | LOAD | POWER / LIMIT / MAX | GPUCLOCK | MEMCLOCK | VENDOR - MODEL
0 | P2 | 63 | 37 | 100 | 91 / 110 / 110 | 1556 | 3802 | ZOTAC - GeForce GTX 1070
1 | P2 | 64 | 41 | 100 | 111 / 110 / 110 | 1531 | 3802 | ZOTAC - GeForce GTX 1070
2 | P2 | 62 | 43 | 100 | 105 / 110 / 110 | 1506 | 3802 | GIGABYTE - GeForce GTX 1070
3 | P2 | 58 | 36 | 100 | 106 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070
4 | P2 | 63 | 43 | 100 | 110 / 110 / 110 | 1518 | 3802 | GIGABYTE - GeForce GTX 1070
5 | P2 | 60 | 39 | 100 | 112 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070
6 | P2 | 59 | 36 | 100 | 111 / 110 / 110 | 1531 | 3802 | GIGABYTE - GeForce GTX 1070
7 | P2 | 67 | 49 | 100 | 107 / 110 / 110 | 1885 | 3802 | GIGABYTE - GeForce GTX 1060 3GB --------------------- the problem remains... Thats for OVERCLOCK_MODE=GLOBAL please post for OVERCLOCK_MODE=NO and OVERCLOCK_MODE=ALGO_SPECIFIC too And you did not answer my question: Does it show nvidia-settings applying OC values after miner restart on gnome-terminal or not? |
|
|
|
akokkon
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 30, 2019, 11:12:28 AM |
|
as i wrote before the gpuinfo prints the same results before and after algo_specific _oc
Does it show nvidia-settings applying OC values after miner restart on gnome-terminal? Please set OVERCLOCK_MODE to " NO", "GLOBAL" and "ALGO_SPECIFIC" with different values. Restart NVOC after editing 1bash with: bash ~/NVOC/mining/nvOC restart
Check if gnome-terminal shows nvidia-settings applying OC values or not Run report command after every nvOC restart and post results. bash ~/NVOC/mining/nvOC report
Report generator for nvOC v0019-3.2 v0012
Operating System info:
Kernel : 4.4.0-138-generic
OS : Ubuntu 16.04.5 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10)
nvidia driver : 410.78
nvOC info:
nvOC path : /home/m1/NVOC/mining
nvOC : 0019-3.2
Report : 0012
1bash : 0058
1bash.template: 0058
3main : 0028
5watchdog : 0024
6tempcontrol : 0012
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0013
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3735200 kB
Mem Free : 1130092 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
CUDA SDK version
nvcc path : /usr/local/cuda/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2018 NVIDIA Corporation
Built on Tue_Jun_12_23:07:04_CDT_2018
Cuda compilation tools, release 9.2, V9.2.148
nvoc.service systemd's log
● nvoc.service - nvOC Service
Loaded: loaded (/etc/systemd/system/nvoc.service; enabled; vendor preset: enabled)
Active: inactive (dead)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 14.3G disk 1 1 usb SanDisk Ultra Fit 1.00
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 14.3G ext4 part 1 1 /
VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
Local git branch and submodules status:
## release...origin/release
M 3main
+8baabf41eacfbcb5d0e3aa8db0e94289c91e516a miners (heads/3.2-miners)
## HEAD (no branch)
1bash settings:
1bash version .............: 0058
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 20
GPU Utilization Threshold .: 70
Alternate Pool ............: NO
Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 60
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 38
MAXIMAL_FAN_SPEED .........: 90
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 30
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO
POWERLIMIT MODE ...........: GLOBAL
Power Limit WATTS .........: 110
OVERCLOCK MODE ............: GLOBAL
Memory Overclock ..........: 1000
Core Overclock ............: 100
GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: nv074
plusCPU ...................: NO
AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: AION;BTCZ;BTG;NICE_LYRA2REV3;NICE_X16R;RVN;XMN;ZEL
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: ZEL
ALGO ......................: ZHASH
MINER .....................: GMINER
ZEL WORKER ................: nv074
ZEL ADDRESS ...............: t1VPYLF9...
ZEL POOL ..................: zel-eu.coinblockers.com
ZEL PORT ..................: 4446
ID | PS | T° | FAN | LOAD | POWER / LIMIT / MAX | GPUCLOCK | MEMCLOCK | VENDOR - MODEL
0 | P2 | 63 | 37 | 100 | 91 / 110 / 110 | 1556 | 3802 | ZOTAC - GeForce GTX 1070
1 | P2 | 64 | 41 | 100 | 111 / 110 / 110 | 1531 | 3802 | ZOTAC - GeForce GTX 1070
2 | P2 | 62 | 43 | 100 | 105 / 110 / 110 | 1506 | 3802 | GIGABYTE - GeForce GTX 1070
3 | P2 | 58 | 36 | 100 | 106 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070
4 | P2 | 63 | 43 | 100 | 110 / 110 / 110 | 1518 | 3802 | GIGABYTE - GeForce GTX 1070
5 | P2 | 60 | 39 | 100 | 112 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070
6 | P2 | 59 | 36 | 100 | 111 / 110 / 110 | 1531 | 3802 | GIGABYTE - GeForce GTX 1070
7 | P2 | 67 | 49 | 100 | 107 / 110 / 110 | 1885 | 3802 | GIGABYTE - GeForce GTX 1060 3GB --------------------- the problem remains... Thats for OVERCLOCK_MODE=GLOBAL please post for OVERCLOCK_MODE=NO and OVERCLOCK_MODE=ALGO_SPECIFIC too And you did not answer my question: Does it show nvidia-settings applying OC values after miner restart on gnome-terminal or not? 1. it does not apply nvidia oc settings after miner restart 2. I will post OVERCLOCK_MODE=NO and OVERCLOCK_MODE=ALGO_SPECIFIC reports |
|
|
|
|
akokkon
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 30, 2019, 12:25:25 PM |
|
Report generator for nvOC v0019-3.2 v0012
Operating System info:
Kernel : 4.4.0-138-generic
OS : Ubuntu 16.04.5 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10)
nvidia driver : 410.78
nvOC info:
nvOC path : /home/m1/NVOC/mining
nvOC : 0019-3.2
Report : 0012
1bash : 0058
1bash.template: 0058
3main : 0028
5watchdog : 0024
6tempcontrol : 0012
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0013
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3735200 kB
Mem Free : 1243092 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
CUDA SDK version
nvcc path : /usr/local/cuda/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2018 NVIDIA Corporation
Built on Tue_Jun_12_23:07:04_CDT_2018
Cuda compilation tools, release 9.2, V9.2.148
nvoc.service systemd's log
● nvoc.service - nvOC Service
Loaded: loaded (/etc/systemd/system/nvoc.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2019-04-30 14:41:55 EEST; 39min ago
Process: 1018 ExecStart=/usr/bin/screen -c /home/m1/NVOC/mining/screenrc-main -dmSL main /bin/bash /home/m1/NVOC/mining/2unix (code=exited, status=0/SUCCESS)
Main PID: 1020 (screen)
CGroup: /system.slice/nvoc.service
├─1020 /usr/bin/SCREEN -c /home/m1/NVOC/mining/screenrc-main -dmSL main /bin/bash /home/m1/NVOC/mining/2unix
├─1023 /bin/bash /home/m1/NVOC/mining/2unix
├─1126 bash /home/m1/NVOC/mining/3main
├─2119 python2 -m guake.main -n /home/m1/NVOC/mining/6tempcontrol -r MINER_TEMP_CONTROL -e tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/tempcontrol-screenlog.0
├─2139 dbus-launch --autolaunch c6d74f6db47d497d8fa5576b2545bdf5 --binary-syntax --close-stderr
├─2140 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
├─2142 /usr/lib/x86_64-linux-gnu/gconf/gconfd-2
├─2144 gnome-pty-helper
├─2145 /bin/bash
├─2162 /usr/lib/x86_64-linux-gnu/notify-osd
├─2166 /usr/lib/gvfs/gvfsd
├─2171 /usr/lib/gvfs/gvfsd-fuse /home/m1/.gvfs -f -o big_writes
├─2181 /usr/bin/gnome-screensaver --no-daemon
├─2186 /bin/bash
├─2199 tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/tempcontrol-screenlog.0
├─2212 /bin/bash
├─2225 bash /home/m1/NVOC/mining/7telegram
├─2316 SCREEN -c /home/m1/NVOC/mining/screenrc-wtm -dmSL wtm bash /home/m1/NVOC/mining/8wtm_auto_switch
├─2319 bash /home/m1/NVOC/mining/8wtm_auto_switch
├─2374 /bin/bash
├─2387 tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/8_wtmautoswitchlog
├─2460 SCREEN -c /home/m1/NVOC/mining/screenrc-watchdog -dmSL wdog bash /home/m1/NVOC/mining/5watchdog
├─2464 bash /home/m1/NVOC/mining/5watchdog
├─2488 /bin/bash
├─2501 tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/watchdog-screenlog.0
├─2552 tail -f -n 1 /home/m1/NVOC/mining/nvoc_logs/screenlog.0
├─7662 sleep 1800
├─8742 sleep 180
├─9328 sleep 20
├─9329 bash /home/m1/NVOC/mining/nvOC report
├─9455 systemctl status nvoc.service
└─9456 cat
Apr 30 14:42:20 m1-desktop sudo[2409]: pam_unix(sudo:session): session closed for user root
Apr 30 14:42:20 m1-desktop sudo[2480]: m1 : TTY=pts/23 ; PWD=/home/m1/NVOC/mining ; USER=root ; COMMAND=/usr/bin/renice -n -19 -p 2464
Apr 30 14:42:20 m1-desktop sudo[2480]: pam_unix(sudo:session): session opened for user root by (uid=0)
Apr 30 14:42:20 m1-desktop sudo[2480]: pam_unix(sudo:session): session closed for user root
Apr 30 14:42:20 m1-desktop sudo[2482]: m1 : TTY=pts/23 ; PWD=/home/m1/NVOC/mining ; USER=root ; COMMAND=/usr/bin/ionice -c2 -n0 -p2464
Apr 30 14:42:20 m1-desktop sudo[2482]: pam_unix(sudo:session): session opened for user root by (uid=0)
Apr 30 14:42:20 m1-desktop sudo[2482]: pam_unix(sudo:session): session closed for user root
Apr 30 14:42:38 m1-desktop sudo[2862]: m1 : TTY=pts/17 ; PWD=/home/m1/NVOC/mining ; USER=root ; COMMAND=/usr/bin/nvidia-settings -a [fan:0]/GPUTargetFanSpeed=38 -a [fan:1]/GPUTargetFanSpeed=38 -a [fan:2]/GPUTargetFanSpeed=38 -a [fan:3]/GPUTargetFanSpeed=38 -a [fan:4]/GPUTargetFanSpeed=38 -a [fan:5]/GPUTargetFanSpeed=38 -a [fan:6]/GPUTargetFanSpeed=38
Apr 30 14:42:38 m1-desktop sudo[2862]: pam_unix(sudo:session): session opened for user root by (uid=0)
Apr 30 14:42:44 m1-desktop sudo[2862]: pam_unix(sudo:session): session closed for user root
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 14.3G disk 1 1 usb SanDisk Ultra Fit 1.00
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 14.3G ext4 part 1 1 /
VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
Local git branch and submodules status:
## release...origin/release
M 3main
+8baabf41eacfbcb5d0e3aa8db0e94289c91e516a miners (heads/3.2-miners)
## HEAD (no branch)
1bash settings:
1bash version .............: 0058
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 20
GPU Utilization Threshold .: 70
Alternate Pool ............: NO
Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 60
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 38
MAXIMAL_FAN_SPEED .........: 90
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 30
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO
POWERLIMIT MODE ...........: ALGO_SPECIFIC
Power Limit WATTS .........: 113
OVERCLOCK MODE ............: NO
GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: nv074
plusCPU ...................: NO
AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: AION;BTCZ;BTG;NICE_LYRA2REV3;NICE_X16R;RVN;XMN;ZEL
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: ZEL
ALGO ......................: ZHASH
MINER .....................: GMINER
ZEL WORKER ................: nv074
ZEL ADDRESS ...............: t1VPYLF9...
ZEL POOL ..................: zel-eu.coinblockers.com
ZEL PORT ..................: 4446
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the tags. This will ensure proper alignment when posting the Report. =============================================================== m1@m1-desktop:~/NVOC/mining$ bash ~/NVOC/mining/nvOC gpuinfo [3;J m1@m1-desktop:~$/home/m1/NVOC/mining/nvOC gpuinfo ID | PS | T° | FAN | LOAD | POWER / LIMIT / MAX | GPUCLOCK | MEMCLOCK | VENDOR - MODEL 0 | P2 | 62 | 38 | 100 | 98 / 113 / 113 | 1607 | 3802 | ZOTAC - GeForce GTX 1070 1 | P2 | 63 | 42 | 100 | 109 / 113 / 113 | 1531 | 3802 | ZOTAC - GeForce GTX 1070 2 | P2 | 62 | 46 | 100 | 114 / 113 / 113 | 1518 | 3802 | GIGABYTE - GeForce GTX 1070 3 | P2 | 58 | 38 | 100 | 110 / 113 / 113 | 1556 | 3802 | GIGABYTE - GeForce GTX 1070 4 | P2 | 62 | 46 | 100 | 112 / 113 / 113 | 1518 | 3802 | GIGABYTE - GeForce GTX 1070 5 | P2 | 60 | 41 | 100 | 110 / 113 / 113 | 1569 | 3802 | GIGABYTE - GeForce GTX 1070 6 | P2 | 58 | 38 | 100 | 109 / 113 / 113 | 1556 | 3802 | GIGABYTE - GeForce GTX 1070 7 | P2 | 68 | 51 | 100 | 110 / 113 / 113 | 1898 | 3802 | GIGABYTE - GeForce GTX 1060 3GB |
|
|
|
|
akokkon
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 30, 2019, 12:44:09 PM |
|
Report generator for nvOC v0019-3.2 v0012
Operating System info:
Kernel : 4.4.0-138-generic
OS : Ubuntu 16.04.5 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10)
nvidia driver : 410.78
nvOC info:
nvOC path : /home/m1/NVOC/mining
nvOC : 0019-3.2
Report : 0012
1bash : 0058
1bash.template: 0058
3main : 0028
5watchdog : 0024
6tempcontrol : 0012
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0013
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3735200 kB
Mem Free : 1338496 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
CUDA SDK version
nvcc path : /usr/local/cuda/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2018 NVIDIA Corporation
Built on Tue_Jun_12_23:07:04_CDT_2018
Cuda compilation tools, release 9.2, V9.2.148
nvoc.service systemd's log
● nvoc.service - nvOC Service
Loaded: loaded (/etc/systemd/system/nvoc.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2019-04-30 15:39:50 EEST; 1min 36s ago
Process: 917 ExecStart=/usr/bin/screen -c /home/m1/NVOC/mining/screenrc-main -dmSL main /bin/bash /home/m1/NVOC/mining/2unix (code=exited, status=0/SUCCESS)
Main PID: 926 (screen)
CGroup: /system.slice/nvoc.service
├─ 926 /usr/bin/SCREEN -c /home/m1/NVOC/mining/screenrc-main -dmSL main /bin/bash /home/m1/NVOC/mining/2unix
├─ 927 /bin/bash /home/m1/NVOC/mining/2unix
├─1149 bash /home/m1/NVOC/mining/3main
├─2161 python2 -m guake.main -n /home/m1/NVOC/mining/6tempcontrol -r MINER_TEMP_CONTROL -e tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/tempcontrol-screenlog.0
├─2174 dbus-launch --autolaunch c6d74f6db47d497d8fa5576b2545bdf5 --binary-syntax --close-stderr
├─2175 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
├─2177 /usr/lib/x86_64-linux-gnu/gconf/gconfd-2
├─2179 gnome-pty-helper
├─2180 /bin/bash
├─2197 /usr/lib/x86_64-linux-gnu/notify-osd
├─2201 /usr/lib/gvfs/gvfsd
├─2206 /usr/lib/gvfs/gvfsd-fuse /home/m1/.gvfs -f -o big_writes
├─2216 /usr/bin/gnome-screensaver --no-daemon
├─2221 /bin/bash
├─2234 tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/tempcontrol-screenlog.0
├─2248 /bin/bash
├─2261 bash /home/m1/NVOC/mining/7telegram
├─2351 SCREEN -c /home/m1/NVOC/mining/screenrc-wtm -dmSL wtm bash /home/m1/NVOC/mining/8wtm_auto_switch
├─2354 bash /home/m1/NVOC/mining/8wtm_auto_switch
├─2409 /bin/bash
├─2422 tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/8_wtmautoswitchlog
├─2491 sleep 1800
├─2501 SCREEN -c /home/m1/NVOC/mining/screenrc-watchdog -dmSL wdog bash /home/m1/NVOC/mining/5watchdog
├─2505 bash /home/m1/NVOC/mining/5watchdog
├─2531 /bin/bash
├─2545 tail -n 0 -f /home/m1/NVOC/mining/nvoc_logs/watchdog-screenlog.0
├─2594 tail -f -n 1 /home/m1/NVOC/mining/nvoc_logs/screenlog.0
├─2606 sleep 180
├─3291 sleep 20
├─3292 /bin/bash /home/m1/NVOC/mining/nvOC report
├─3418 systemctl status nvoc.service
└─3419 cat
Apr 30 15:40:20 m1-desktop sudo[2521]: m1 : TTY=pts/23 ; PWD=/home/m1/NVOC/mining ; USER=root ; COMMAND=/usr/bin/renice -n -19 -p 2505
Apr 30 15:40:20 m1-desktop sudo[2521]: pam_unix(sudo:session): session opened for user root by (uid=0)
Apr 30 15:40:20 m1-desktop sudo[2521]: pam_unix(sudo:session): session closed for user root
Apr 30 15:40:20 m1-desktop sudo[2523]: m1 : TTY=pts/23 ; PWD=/home/m1/NVOC/mining ; USER=root ; COMMAND=/usr/bin/ionice -c2 -n0 -p2505
Apr 30 15:40:20 m1-desktop sudo[2523]: pam_unix(sudo:session): session opened for user root by (uid=0)
Apr 30 15:40:20 m1-desktop sudo[2523]: pam_unix(sudo:session): session closed for user root
Apr 30 15:40:20 m1-desktop sudo[2489]: pam_unix(sudo:session): session closed for user root
Apr 30 15:40:37 m1-desktop sudo[2837]: m1 : TTY=pts/17 ; PWD=/home/m1/NVOC/mining ; USER=root ; COMMAND=/usr/bin/nvidia-settings -a [fan:0]/GPUTargetFanSpeed=38 -a [fan:1]/GPUTargetFanSpeed=38 -a [fan:2]/GPUTargetFanSpeed=38 -a [fan:3]/GPUTargetFanSpeed=38 -a [fan:4]/GPUTargetFanSpeed=38 -a [fan:5]/GPUTargetFanSpeed=38 -a [fan:6]/GPUTargetFanSpeed=38 -a [fan:7]/GPUTargetFanSpeed=42
Apr 30 15:40:37 m1-desktop sudo[2837]: pam_unix(sudo:session): session opened for user root by (uid=0)
Apr 30 15:40:44 m1-desktop sudo[2837]: pam_unix(sudo:session): session closed for user root
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 14.3G disk 1 1 usb SanDisk Ultra Fit 1.00
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 14.3G ext4 part 1 1 /
VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
Local git branch and submodules status:
## release...origin/release
M 3main
+8baabf41eacfbcb5d0e3aa8db0e94289c91e516a miners (heads/3.2-miners)
## HEAD (no branch)
1bash settings:
1bash version .............: 0058
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 20
GPU Utilization Threshold .: 70
Alternate Pool ............: NO
Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 60
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 38
MAXIMAL_FAN_SPEED .........: 90
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 30
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO
POWERLIMIT MODE ...........: ALGO_SPECIFIC
Power Limit WATTS .........: 113
OVERCLOCK MODE ............: ALGO_SPECIFIC
Core Overclock ............: 150
Memory Overclock ..........: 1390
GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: nv074
plusCPU ...................: NO
AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: AION;BTCZ;BTG;NICE_LYRA2REV3;NICE_X16R;RVN;XMN;ZEL
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: ZEL
ALGO ......................: ZHASH
MINER .....................: GMINER
ZEL WORKER ................: nv074
ZEL ADDRESS ...............: t1VPYLF9...
ZEL POOL ..................: zel-eu.coinblockers.com
ZEL PORT ..................: 4446
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the tags. This will ensure proper alignment when posting the Report. ===================================================== m1@m1-desktop:~/NVOC/mining$ nvOC gpuinfo [3;J m1@m1-desktop:~$/home/m1/NVOC/mining/nvOC gpuinfo ID | PS | T° | FAN | LOAD | POWER / LIMIT / MAX | GPUCLOCK | MEMCLOCK | VENDOR - MODEL 0 | P2 | 63 | 36 | 100 | 108 / 113 / 113 | 1594 | 3802 | ZOTAC - GeForce GTX 1070 1 | P2 | 63 | 41 | 100 | 111 / 113 / 113 | 1556 | 3802 | ZOTAC - GeForce GTX 1070 2 | P2 | 63 | 44 | 100 | 107 / 113 / 113 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070 3 | P2 | 59 | 36 | 100 | 113 / 113 / 113 | 1569 | 3802 | GIGABYTE - GeForce GTX 1070 4 | P2 | 63 | 44 | 100 | 113 / 113 / 113 | 1531 | 3802 | GIGABYTE - GeForce GTX 1070 5 | P2 | 60 | 39 | 100 | 112 / 113 / 113 | 1569 | 3802 | GIGABYTE - GeForce GTX 1070 6 | P2 | 59 | 36 | 100 | 114 / 113 / 113 | 1556 | 3802 | GIGABYTE - GeForce GTX 1070 7 | P2 | 68 | 50 | 100 | 104 / 113 / 113 | 1911 | 3802 | GIGABYTE - GeForce GTX 1060 3GB |
|
|
|
|
nanominer.official
Jr. Member
Offline
Activity: 55
Merit: 5
|
|
April 30, 2019, 02:02:13 PM |
|
Dear miners and friends This is nvOC Community Release based on the original nvOC easy-to-use Linux Nvidia by fullzeronvOC Community Release like the original nvOC is free and has No Dev-Fee. You can always check 1bash to find developers BTC addresses if you wish to donate. nvOC Community Release is set of scripts can be use in any Ubuntu system (need some expert edits) or use with provided images (Ubuntu 16.04/18.04) build with Nvidia individual card OC and individual card power limit support, manual fan support, auto launching on boot, auto switch coin based on wtm profits and a single easy to configure Bash Script (1bash) which can be configured from any computer using a text editor. With nvOC Community Releaed you can set almost anything you wish for in your mining rig and easily add any new coin, algo or miners from 1bash. Built-in Algorithms:
BITCORE CRYPTONIGHT CRYPTONIGHTHEAVY CRYPTONIGHTV7 CRYPTONIGHTV8 CUCKAROO29 CUCKATOO31 CUCKOOCYCLE DECRED ENERGI EQUIHASH ETHASH GRS LBRY LYRA2V2 LYRA2RE3 LYRA2Z MYR_GR NEOSCRYPT PASCAL PHI1612 PHI2 SIA SIB SKEIN SKUNK X13 X16R X21S X22I XEVAN ZHASH Builtin miners:
BMINER CLAYMORE CryptoDredge DSTM ENERGIMINER ETHMINER EWBF GMINER LOLMINER NBMiner PhoenixMiner Tpccminer T_Rex XMR_Stak ZENEMYminer Z_EWBF cpuOPT Available Settings: - Set Auto Start Miner on boot
- Set Auto Switching coins
- Set the GPUs you want to mine with
- Use TEAMVIEWER and set the resolution you want to use with it
- Auto Reboot rig timer
- Auto restart miner timer
- Schedule mining to stop and start between given times in a day
- Set your desired worker names
- Set to clear logs on reboot
- Use of SRR
- Control GPU LED and brightness
- Miner Watchdog: Monitors the rig and automatically corrects the detected problems if possible by restarting miner or rig
- Load Check to check system load average and reboot if needed
- Use sys request reboot or normal reboot
- WatchDog check cycle period
- Set Minimum GPU utilization threshold to warn and restart mining if it goes bellow
- Alternate pool settings
- Power limit and Overclock modes: Global, GPU Specific, Algo Specific, Global with GPU Offset, Algo Specific with GPU Offset
- Use Headless mode (for P100 card variants with no monitor output)
- Use OhGodAnETHlargementPill
- Miner Temp Control to automatically adjusts the fan speed to keep the desired temp
- Use manual fan control individual target temps
- Set Hot ShutDown to shutdown rig if temp exceeds
- Set TempControl check cycles
- Set Minimal and Maximal fan speeds
- Set Allowed fan difference, fan adjust and power adjust steps
- Foreman monitoring
- Supports Nicehash, Zpool and MPH Algo mining
Check contributors and all the settings available in 1bash.templateHello there, I'd like to ask you, is there any chance you can add Nanominer to nvOC? Here's the website: https://nanominer.orgThanks in advance! |
|
|
|
|
noct01!
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 30, 2019, 06:30:49 PM
Last edit: April 30, 2019, 07:17:07 PM by noct01! |
|
Hi,
Can someone walk me through how to add new miners to NVOC please? I've added new coins/algos before quite easily using the existing miners but I don't understand how the json files work for integrating new miners.
I can get the miner working on it's own by running it as a standalone program through the terminal but obviously don't get any of NVOCs wonderful extra features...
Thanks!
|
|
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
May 01, 2019, 06:15:49 AM
Last edit: September 18, 2019, 10:14:40 PM by mprep |
|
as i wrote before the gpuinfo prints the same results before and after algo_specific _oc
Does it show nvidia-settings applying OC values after miner restart on gnome-terminal? Please set OVERCLOCK_MODE to " NO", "GLOBAL" and "ALGO_SPECIFIC" with different values. Restart NVOC after editing 1bash with: bash ~/NVOC/mining/nvOC restart
Check if gnome-terminal shows nvidia-settings applying OC values or not Run report command after every nvOC restart and post results. bash ~/NVOC/mining/nvOC report
--------------------- the problem remains... Thats for OVERCLOCK_MODE=GLOBAL please post for OVERCLOCK_MODE=NO and OVERCLOCK_MODE=ALGO_SPECIFIC too And you did not answer my question: Does it show nvidia-settings applying OC values after miner restart on gnome-terminal or not? 1. it does not apply nvidia oc settings after miner restart 2. I will post OVERCLOCK_MODE=NO and OVERCLOCK_MODE=ALGO_SPECIFIC reports I'm asking what it shows when miner start on gnome terminal. Stop nvOC, close gnome-terminal and open it it again. Check it to see what errors it gives when trying to apply OC values
Dear miners and friends This is nvOC Community Release based on the original nvOC easy-to-use Linux Nvidia by fullzeronvOC Community Release like the original nvOC is free and has No Dev-Fee. You can always check 1bash to find developers BTC addresses if you wish to donate. nvOC Community Release is set of scripts can be use in any Ubuntu system (need some expert edits) or use with provided images (Ubuntu 16.04/18.04) build with Nvidia individual card OC and individual card power limit support, manual fan support, auto launching on boot, auto switch coin based on wtm profits and a single easy to configure Bash Script (1bash) which can be configured from any computer using a text editor. With nvOC Community Releaed you can set almost anything you wish for in your mining rig and easily add any new coin, algo or miners from 1bash. Built-in Algorithms:
BITCORE CRYPTONIGHT CRYPTONIGHTHEAVY CRYPTONIGHTV7 CRYPTONIGHTV8 CUCKAROO29 CUCKATOO31 CUCKOOCYCLE DECRED ENERGI EQUIHASH ETHASH GRS LBRY LYRA2V2 LYRA2RE3 LYRA2Z MYR_GR NEOSCRYPT PASCAL PHI1612 PHI2 SIA SIB SKEIN SKUNK X13 X16R X21S X22I XEVAN ZHASH Builtin miners:
BMINER CLAYMORE CryptoDredge DSTM ENERGIMINER ETHMINER EWBF GMINER LOLMINER NBMiner PhoenixMiner Tpccminer T_Rex XMR_Stak ZENEMYminer Z_EWBF cpuOPT Available Settings: - Set Auto Start Miner on boot
- Set Auto Switching coins
- Set the GPUs you want to mine with
- Use TEAMVIEWER and set the resolution you want to use with it
- Auto Reboot rig timer
- Auto restart miner timer
- Schedule mining to stop and start between given times in a day
- Set your desired worker names
- Set to clear logs on reboot
- Use of SRR
- Control GPU LED and brightness
- Miner Watchdog: Monitors the rig and automatically corrects the detected problems if possible by restarting miner or rig
- Load Check to check system load average and reboot if needed
- Use sys request reboot or normal reboot
- WatchDog check cycle period
- Set Minimum GPU utilization threshold to warn and restart mining if it goes bellow
- Alternate pool settings
- Power limit and Overclock modes: Global, GPU Specific, Algo Specific, Global with GPU Offset, Algo Specific with GPU Offset
- Use Headless mode (for P100 card variants with no monitor output)
- Use OhGodAnETHlargementPill
- Miner Temp Control to automatically adjusts the fan speed to keep the desired temp
- Use manual fan control individual target temps
- Set Hot ShutDown to shutdown rig if temp exceeds
- Set TempControl check cycles
- Set Minimal and Maximal fan speeds
- Set Allowed fan difference, fan adjust and power adjust steps
- Foreman monitoring
- Supports Nicehash, Zpool and MPH Algo mining
Check contributors and all the settings available in 1bash.templateHello there, I'd like to ask you, is there any chance you can add Nanominer to nvOC? Here's the website: https://nanominer.orgThanks in advance! Sure will do, Send miner command line example and we will take a look into it.
Hi,
Can someone walk me through how to add new miners to NVOC please? I've added new coins/algos before quite easily using the existing miners but I don't understand how the json files work for integrating new miners.
I can get the miner working on it's own by running it as a standalone program through the terminal but obviously don't get any of NVOCs wonderful extra features...
Thanks!
Make your new miner folder and version sub folder Put miner executable inside the version sub folder Copy an existing .nvoc-miner.json from one of the miners/miner/version folder to your miner/version folder and edit it. Its best to pick one that has closest command line settings to your new miner. For example PhoenixMiner and Claymore are almost same and ccminer based miners are almost same too. Which part you dont understand? Edit: You can also skip editing .nvoc-miner.json and use old 0miner style if you are more comfortable with that |
|
|
|
|
Heguli97
|
|
May 02, 2019, 01:15:25 PM |
|
Hi  I run older versions of this software on my rigs. Are there any specific instructions on how to update Teamviewer? I can't access my rigs anymore because the teamviewer version is too old, can i just update through teamviewer and it won't mess up any of the startup scripts etc.? Thanks. |
|
|
|
|
dhan000
|
|
May 02, 2019, 01:20:56 PM |
|
We are unable to mining BEAM with NVOC.
google translate.
|
|
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
May 03, 2019, 09:14:18 AM
Last edit: September 18, 2019, 10:30:59 PM by mprep |
|
Latest stable version: 19-3.2Latest Image: nvOC-19-3.2 Ubuntu-16.04 Cuda-9.2 Nvidia-418 2019-05-02: MEGA.nz: Direct Download LinkGDrive: Direct Download Link (Thanks to damNmad) OneDrive: Direct Download Link (Thanks to LuKePicci) nvOC-3.2_Ubuntu-16.04_Cuda-9.2_Nvidia-418_2019-05-02.7z sha256 8379e98ddcfb5daf7d33fed66d6c33298c2198ee2c272ee59909e8faffc943de
nvOC-3.2_Ubuntu-16.04_Cuda-9.2_Nvidia-418_2019-05-02.img sha256 ef3146abb080bc158f814b46ea7fb065c6a997515a9bdd21d21a6edee21144ba
Download size: 2.85 Gb
Image size: 10 Gb
As always: Download latest 1bash.template Edit and rename it to 1bash Put it in small fat partition Connect your SSD, HDD, USB to rig
Hi I run older versions of this software on my rigs. Are there any specific instructions on how to update Teamviewer? I can't access my rigs anymore because the teamviewer version is too old, can i just update through teamviewer and it won't mess up any of the startup scripts etc.? Thanks. Dont think it cause any problems to update it.
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
May 03, 2019, 10:25:47 AM |
|
|
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
May 03, 2019, 11:40:17 AM |
|
|
|
|
|
|
Heguli97
|
|
May 03, 2019, 11:51:39 AM |
|
Hi I run older versions of this software on my rigs. Are there any specific instructions on how to update Teamviewer? I can't access my rigs anymore because the teamviewer version is too old, can i just update through teamviewer and it won't mess up any of the startup scripts etc.? Thanks. Dont think it cause any problems to update it. Thank you worked like a charm. I used these command to do it, if anyone's interested # 64 bits version
wget https://download.teamviewer.com/download/linux/teamviewer_amd64.deb
Install it :
sudo dpkg -i teamviewer_*.deb
Install missing dependencies :
sudo apt-get -f install |
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
May 04, 2019, 06:21:29 AM
Last edit: September 18, 2019, 11:25:35 PM by mprep |
|
Hi I run older versions of this software on my rigs. Are there any specific instructions on how to update Teamviewer? I can't access my rigs anymore because the teamviewer version is too old, can i just update through teamviewer and it won't mess up any of the startup scripts etc.? Thanks. Dont think it cause any problems to update it. Thank you worked like a charm. I used these command to do it, if anyone's interested # 64 bits version
wget https://download.teamviewer.com/download/linux/teamviewer_amd64.deb
Install it :
sudo dpkg -i teamviewer_*.deb
Install missing dependencies :
sudo apt-get -f install Glad its solved, I forgot to update teamviewer in latest image. Your solution may help many.
We are unable to mining BEAM with NVOC.
google translate.
Why not? Just add the coin info in 1bash In Algo section add it to Equihash coins: EQUIHASH_COINS="BEAM,...." Set you Equihash miner to GMINER or whichever you like: Add coin info: # BEAM (BEAM)
BEAM_ADDRESS="replace_with_your_address"
BEAM_OPTS="--algo 150_5"
BEAM_POOL="beam.sparkpool.com"
BEAM_PORT="2222"
BEAM_WORKER="$WORKERNAME"
BEAM_POOL_PROTOCOL="stratum+tcp" Set your coin: Restart nvOC bash ~/NVOC/mining/nvOC restart
Why the algo_specific_oc is not working ?
the hashrate is the same as OC core=0 and mem=0
My system is based on nvOC_19-3.x_U16.04_Cuda_8-9.2_N410_2018-10-27.7z and on the automated upgrades (NVOC V0019-3.2)
A new pre built image is available, Try it and see if it solves your problem or not. Latest stable version: 19-3.2Latest Image: nvOC-19-3.2 Ubuntu-16.04 Cuda-9.2 Nvidia-418 2019-05-02: MEGA.nz: Direct Download LinkGDrive: Direct Download Link (Thanks to damnmad) OneDrive: Direct Download Link (Thanks to LuKePicci) nvOC-3.2_Ubuntu-16.04_Cuda-9.2_Nvidia-418_2019-05-02.7z sha256 8379e98ddcfb5daf7d33fed66d6c33298c2198ee2c272ee59909e8faffc943de
nvOC-3.2_Ubuntu-16.04_Cuda-9.2_Nvidia-418_2019-05-02.img sha256 ef3146abb080bc158f814b46ea7fb065c6a997515a9bdd21d21a6edee21144ba
Download size: 2.85 Gb
Image size: 10 Gb
As always: Download latest 1bash.template Edit and rename it to 1bash Put it in small fat partition Connect your SSD, HDD, USB to rig |
|
|
|
|
dhan000
|
|
May 04, 2019, 10:42:51 AM |
|
We are unable to mining BEAM with NVOC.
google translate.
Why not? Just add the coin info in 1bash In Algo section add it to Equihash coins: EQUIHASH_COINS="BEAM,...." thanks papampi |
|
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
May 06, 2019, 10:47:07 AM |
|
GMiner updated to 1.41Change Logs: v1.41+ Improved performance for BEAM (Equihash 150,5) on Nvidia cards v1.40+ Significant performance improvements for BEAM (Equihash 150,5) on Nvidia cards v1.39+ Added 4GB Solver for Aeternity (Nvidia GPUs) + Improved 144,5 and 192,7 performance for Nvidia GPUs (more optimizations coming soon) + Minor performance improvements for Grin29, Swap and Aeternity on Nvidia GPUs + Improved performance on Grin29, Swap and Aeternity in OC mode on Nvidia GPUs + Fixed anti-hacking error on newest Nvidia drivers To get latest updates, Run: bash ~/NVOC/mining/nvOC upgrade You can always remind us if you noticed a miner is updated so we update it faster in nvOC miners repo
|
|
|
|
Brainfruit_Me
Newbie
Offline
Activity: 23
Merit: 0
|
|
May 10, 2019, 03:13:33 AM |
|
Do we have a progpow miner on nvoc? Antone tried this yet?
|
|
|
|
|
papampi (OP)
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
May 12, 2019, 09:21:29 AM |
|
Do we have a progpow miner on nvoc? Antone tried this yet?
Check the builtin miners list in 1st post. If none support it let us know the miner for it and we can add it. |
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
May 14, 2019, 10:18:27 PM |
|
Do we have a progpow miner on nvoc? Antone tried this yet?
Check the builtin miners list in 1st post. If none support it let us know the miner for it and we can add it. Don't think we have that one @papampi Also, I tried to compile the latest xmr-stak, failing to compile! I've tried to mine sumo coin, not working as expected, when you got a min please look into this screen -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh --config /home/m1/NVOC/mining/miners/XMR_Stak/recommended/config.txt --nvidia /home/m1/NVOC/mining/miners/XMR_Stak/recommended/nvidia.txt --currency cryptonight_r --noCPU -o sumokoin.miner.rocks:4005 -u Sumoo3JbC5Vd2hSngWM6EW8t6ZgpbifSF6QgyQkRbtotH9xpSAX7CPWK1bsbn2kCEzBjYbHZidu9VJt3WTWV458S1iyX82JdD2b.RIGV1932 -p x -r RIGV1932 -i 0
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 3: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: Bad substitution
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 6: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: [[: not found
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 14: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: [[: not found
vm.nr_hugepages = 128
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 25: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: /home/m1/xmr-stak: not found
[WARNING] - Unable to instruct /home/m1/NVOC/mining/miners/XMR_Stak/recommended about which GPUs to enable, it will likely use all of them
screen -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh --config /home/m1/NVOC/mining/miners/XMR_Stak/recommended/config.txt --nvidia /home/m1/NVOC/mining/miners/XMR_Stak/recommended/nvidia.txt --currency cryptonight_r --noCPU -o sumokoin.miner.rocks:4005 -u Sumoo3JbC5Vd2hSngWM6EW8t6ZgpbifSF6QgyQkRbtotH9xpSAX7CPWK1bsbn2kCEzBjYbHZidu9VJt3WTWV458S1iyX82JdD2b.RIGV1932 -p x -r RIGV1932 -i 0
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 3: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: Bad substitution
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 6: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: [[: not found
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 14: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: [[: not found
vm.nr_hugepages = 128
/home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: 25: /home/m1/NVOC/mining/miners/XMR_Stak/recommended/xmr-stak.nvoc.sh: /home/m1/xmr-stak: not found It is failing to find/generate the nvidia.txt file The json needs tweaking as the default coin is hard coded as monero, it should be a variable (user should be able to select coins from the below list) Supported coin options:
- aeon7
- bbscoin
- bittube
- cryptonight
- cryptonight_bittube2
- cryptonight_masari
- cryptonight_haven
- cryptonight_heavy
- cryptonight_lite
- cryptonight_lite_v7
- cryptonight_lite_v7_xor
- cryptonight_r
- cryptonight_superfast
- cryptonight_turtle
- cryptonight_v7
- cryptonight_v8
- cryptonight_v8_double
- cryptonight_v8_half
- cryptonight_v8_reversewaltz
- cryptonight_v8_zelerius
- cryptonight_v7_stellite
- cryptonight_gpu
- cryptonight_conceal
- freehaven
- graft
- haven
- lethean
- masari
- monero
- qrl
- ryo
- stellite
- turtlecoin
- plenteum
- zelerius
- xcashPlease let me know if you need any further information. |
|
|
|
|
