GekkoScience Terminus R606 750GH (up to 1TH) quiet miner, now shipping

[sidehack]

That's... not well at all, sir. I bet if you check, it's plateaued and re-targeted for around 600MHz. If you step the voltage up (top button) and restart cgminer it'll draw more power but you'll see a more frequency-appropriate hashrate.

The formula for these guys is basically six times the NewPac formula. MHz * 12 * 0.114 so 700MHz should see about 960GH if it's running full steam.

[1715602193]

1715602193

[1715602193]

1715602193

[1715602193]

1715602193

[1715602193]

1715602193

[nuanicaj]

That's... not well at all, sir. I bet if you check, it's plateaued and re-targeted for around 600MHz. If you step the voltage up (top button) and restart cgminer it'll draw more power but you'll see a more frequency-appropriate hashrate.

The formula for these guys is basically six times the NewPac formula. MHz * 12 * 0.114 so 700MHz should see about 960GH if it's running full steam.

Can't wait to get mine

[philipma1957]

That's... not well at all, sir. I bet if you check, it's plateaued and re-targeted for around 600MHz. If you step the voltage up (top button) and restart cgminer it'll draw more power but you'll see a more frequency-appropriate hashrate.

The formula for these guys is basically six times the NewPac formula. MHz * 12 * 0.114 so 700MHz should see about 960GH if it's running full steam.

let me check it this morning

it had tuned to freq 612.5

so I restarted it with  volts higher

o
x
x                

is now  

o
x
o

can you  do a volt chart for us.

o
x
x   = ?
___________________
__________________

o
x
o  = ?
___________________
__________________

o
o
o = ?
__________________________
_________________________

I will see if this setting bold type gets me to freq 700.

[sidehack]

There's a nice illustration in the first post.

[philipma1957]

There's a nice illustration in the first post.

okay found it.

[sidehack]

It would not be painless, because the seller is responsible for his own customer's service and support and if I get reports that so-and-so is leaving his customers in the lurch I get to blacklist that guy forever and then have to handle his customers anyway.

The reason I didn't jump at the offer is the same reason I haven't sent these pods to my international guys yet, or to a couple other domestic folks I already know and trust: headache reduction.

[gt_addict]

IF and I do mean IF someone was to change the fan on the R606 what is the amp rating for the connector?

[sidehack]

More than is practical.

[gt_addict]

More than is practical.

Superb! good to know.

[philipma1957]

So are you putting in a 100cfm blaster fan?

If I crank volts to max. Put in two 100cfm fans

Can this do 800mhz?

Or more then that?

Ie what is the highest 24 hour number done so far?

I see one of side hacks was doing 900mhz and 1.195th.

[sidehack]

Yep, and it did that with one stock fan and no case, which means no ducting so the airflow from that one stock fan wasn't even optimal.

It'd stay cooler with a stronger fan, but there's no need to go overboard. And two fans is stupidly wasteful, only necessary for highly constricted airflows like this specifically isn't. Why does everyone think everything needs two high-end server fans these days? It's frickin' 120 watts tops. Keep it simple.

If you're worried about heat, just watch the red lights. They start blinking at 75C.

(but hey, you buy it you can do whatever the heck you want to it; hacking up hardware is the reason I got into this game in the first place)

[philipma1957]

I think it is pretty good set to 775mhz  and power is set to

O
X
O

It does just about 920gh  and stays at 95-100%

with the 3 newpacs set to 225mhz  I am doing close to 1.1th

http://solo.ckpool.org/users/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

which reads  about 1.03th poolside

I have a pc running  a cpu and a gpu

a plat evga psu has spare pcie cables

one powers your hub and 3 newpacs
one power the terminus r606

the cpu is an amd 2700
the gpu is an rx 470

it appears  after two 1 day tests.  the nicehash mining drops the sidehack gear from  1.05 to 1.03  on ck's pool

but  I am taxing the cpu  mining with it must use 50-75% .
the gpu is only 1 card and taxes the cpu less.

I should do a rasp pi build  have to look to see if I have one laying around.

[gt_addict]

Yep, and it did that with one stock fan and no case, which means no ducting so the airflow from that one stock fan wasn't even optimal.

It'd stay cooler with a stronger fan, but there's no need to go overboard. And two fans is stupidly wasteful, only necessary for highly constricted airflows like this specifically isn't. Why does everyone think everything needs two high-end server fans these days? It's frickin' 120 watts tops. Keep it simple.

If you're worried about heat, just watch the red lights. They start blinking at 75C.

(but hey, you buy it you can do whatever the heck you want to it; hacking up hardware is the reason I got into this game in the first place)

Im not going to be going overboard. I was thinking of putting a dust filter on the front and slightly upgrade the pull fan on the back to compensate for the restriction. Im not putting a howler of a fan on. Just didnt want to get a slightly more powerful fan and end up burning something out. Thats all. I totally appreciate that its only 120w of heat dissipation necessary 

[sidehack]

It's a push fan, not a pull (but of course you can turn it around). Dust filter's not a bad idea and the added restriction would be a good reason to upgrade.

Phil, 920GH at 775MHz is terrible efficiency. It's probably re-targeting for 675MHz. 730MHz at 100% will get you 1TH. 920GH on volt setting 5 is pretty good though.

[philipma1957]

typo   freq setting was 675

I just set to volt 6 with  freq 750 looking to see where it settles

It is doing freq 750 at volt setting 6  just a bit over 1 th.
the 3 new pacs at are 250 around 180gh

I am touching 1.2 th for this counting the 3 sticks.

[ColfaxJones]

Hello from a new member, excited to have my R606 in hand. Can someone direct me to instructions or tutorial on to use a Raspberry Pi 3 B+ as a controller for Terminus R606? much appreciated. I've searched high low online with little luck.

[sidehack]

Check the NewPac support thread. This guy is basically a 12-chip NewPac with a few extra bells and/or whistles so the same cgminer installation instructions apply.

[419mining]

Hello from a new member, excited to have my R606 in hand. Can someone direct me to instructions or tutorial on to use a Raspberry Pi 3 B+ as a controller for Terminus R606? much appreciated. I've searched high low online with little luck.

The NewPac/R606 official support forums list the Raspbian compile instructions on page 1: https://bitcointalk.org/index.php?topic=5053833.0.

[cjsummers82]

As those number approach near 1 ms, we'll begin hitting the usb bus limit per miner.
Those other chip states were part of an earlier attempt to sense per chip health.
The extra details is for the early phase releases and sidehack's burn in testing.

They'll fade further into the debug logs in future builds as they become un-interesing for normal use.

@cjsummers82
new build (0d524aa) : works with prohashing.com in --gekko-noboost mode.   they report vmask support but then rejects shares.  adding to review later pile.

vh,

Any update on ASICBOOST functionality for prohashing.com on the newest version of cgminer?  The newpac sticks accept asicboost on previous versions/releases of cgminer (@ 3339a51), but do not on the current release(s).

Thanks!

[anorganix]

Looking forward to global sales (2nd batch).
I'm assuming BitShopper will have them in the EU?

Can't wait to get my hands on one of these babies.