S17+ S9k/SE T17 S17/Pro DR5 B7 Others All Overclock per chip and Voltage Control

[chipless]

New update Z11 Chipless Nitro Public and Private v1.9 now supports Nicehash, better power effiecency as well as couple other small tweaks.

[efudd]

New update Z11 Chipless Nitro Public and Private v1.9 now supports Nicehash, better power effiecency as well as couple other small tweaks.

So, did you end up frying a board in that 2nd Z11?

-j

[chipless]

New update Z11 Chipless Nitro Public and Private v1.9 now supports Nicehash, better power effiecency as well as couple other small tweaks.

So, did you end up frying a board in that 2nd Z11?

-j

Don't know what you are talking about. I haven't fried any boards.

edit.....

I will add I have pushed these machines @1.4v and 105-108 temps for a few weeks without any problems. Currently I am getting 158k with temps below 100c I wont disclose the voltage but it is much less then the first releases.

Most board dropout issues are voltage not the heat. The voltage regulators arent monitored and get very hot at times causing them to thermal shutdown or reduce power and at certain freq it isnt enough to keep going. That is why getting rid of the heat in the room and pre-cooling the air coming in by fan or air conditioner helps. My current cost for 490k a month is 700 in electric. Which still leaves a good profit.

Overall I am happy with the outcome of my machines.

[chipless]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

[smoothyvo]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?

[chipless]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?

The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.

[smoothyvo]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?

The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.

Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.

[chipless]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?

The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.

Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.

I can do that....the main feature is the unlock of the controls. Everything from the 4.xx versions are locked down and not controllable by the user.This image unlcoks it and allows the clocking and voltage to be adjusted. It will give up to 1v instead of 850mv and allows clocking of any frequency.

[chipless]

Now Available Z11 v2.0 Chipless Nitrous Private - Provides user frequency control, more voltage settings per frequency, improved performance and better power efficiency. Nicehash Support!!!

PM for purchase details. Cost for Z11 Nitrous Private Image is .75 ZEC or equivalent value in BTC

Limited public Nitrous v2.0 version will be available in the next couple of days.

[efudd]

Now Available Z11 v2.0 Chipless Nitrous Private - Provides user frequency control, more voltage settings per frequency, improved performance and better power efficiency. Nicehash Support!!!

PM for purchase details. Cost for Z11 Nitrous Private Image is .75 ZEC or equivalent value in BTC

Limited public Nitrous v2.0 version will be available in the next couple of days.

Reference this post in a PM, get a license for mine, free.

-j

[chipless]

Now Available Z11 v2.0 Chipless Nitrous Private - Provides user frequency control, more voltage settings per frequency, improved performance and better power efficiency. Nicehash Support!!!

PM for purchase details. Cost for Z11 Nitrous Private Image is .75 ZEC or equivalent value in BTC

Limited public Nitrous v2.0 version will be available in the next couple of days.

Reference this post in a PM, get a license for mine, free.

-j

Really we are going to back to this bullshit efudd. I was being respectful and not posting on your thread the new releases and you have to get it all started again.


At least with mine they dont have any dev fee problems or accidental connections to your dev server.

[tps_star]

hi i am new and have question
i have z11 miner with APW7 (1800W)power
1: i can overclock with this power or i need buy 2000w or 2200w power ?
2: if i use my orginal power my hashrate up to 150k ?
3: with z11 i can mine 3 diffrent coin with add 3 diffrent url and worker (for example zcl,zac,zencash Simultaneous)?
best regard

[chipless]

hi i am new and have question
i have z11 miner with APW7 (1800W)power
1: i can overclock with this power or i need buy 2000w or 2200w power ?
2: if i use my orginal power my hashrate up to 150k ?
3: with z11 i can mine 3 diffrent coin with add 3 diffrent url and worker (for example zcl,zac,zencash Simultaneous)?
best regard

The Z11 can mine only 1 coin at a time, as far as power the public version you only need 1 PSU rated at 1800 watts the private version you would need either 2 power supplies or 1 bigger then 2000 watts if you run the frequency higher then 787-793. Each miner can vary slightly on the power use.

[chipless]

Now released Free Z11 v2.0 Chipless Nitrous Public Nicehash Support overclocked and overvolted firmware. Gain +4% in speed. NO DEV or License Required.... User frequency control and some voltage control. Link can be found on first post. The 100% Free Public version is limited to 775m (Paid version goes to 825m and has more voltage control)

[tps_star]

thancks for answer
if i use frequency 760 i give how ksol ?
and my chip temp is higher than orginal firmware ?

[chipless]

thancks for answer
if i use frequency 760 i give how ksol ?
and my chip temp is higher than orginal firmware ?

There is no 760 ..762 should give in the 146-150+ range k/sol, Yes you will get more heat as you overclock or overvolt the heat does increase as with any other miner.

[chipless]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?

The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.

Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.

After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.

[smoothyvo]

Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.

Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool?

The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine.

Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great.

After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results.

Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it.

[tps_star]

with power 1800w i can set frequency 762 ?

[chipless]

with power 1800w i can set frequency 762 ?

Yes you should be ok up to about 793m and 940mv. The free version goes to 775 higher frequencies and voltage require the private version.