chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
January 23, 2020, 06:54:33 PM |
|
Hi Chipless,
I have a dead chain in my Bitmain z11 miner. It sees the chain but it counts 0 asics on it as I studied the kerner log when booting. The other 2 chains are fine. Any tips what to do? I tried reflashing and put back al the connections already. I used your firm version 1.8 on it but i tried the original one also. Thanks for your great work.
Best regards Arthur
Check you PSU try a different one if that dont work you may have a dead board. The board will detect but if the power circuit is damaged then the chips dont detect. They are 2 different parts of the board. Mine when a psu got weak not dead but weak it would not detect one of the boards.
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
January 27, 2020, 07:46:01 AM |
|
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 10 license cost is 1200 in btc or zec. This version may also become private so get yours while you can.
speeds of up to 85TH+ on as little as 3200watts
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
favebook
|
|
January 27, 2020, 02:40:30 PM |
|
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 10 license cost is 1200 in btc or zec. This version may also become private so get yours while you can.
speeds of up to 85TH+ on as little as 3200watts
What about small miners (like me) which have up to 2-3 units. Why are you putting MOQ so high?
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
January 27, 2020, 05:15:20 PM |
|
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 10 license cost is 1200 in btc or zec. This version may also become private so get yours while you can.
speeds of up to 85TH+ on as little as 3200watts
What about small miners (like me) which have up to 2-3 units. Why are you putting MOQ so high? At the moment the min is 10 it may change later. The cost is where it is at because of the time frame and ROI can be recovered easily. Minimum to recover my cost for the development. send me a pm and we could discuss options
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
January 28, 2020, 05:39:33 PM Last edit: February 01, 2020, 08:01:14 AM by chipless |
|
Updated Privately purchased. S17+ firmware will not have a public release. I will post details as I can for the process to purchase and the minimum farm size.
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
February 20, 2020, 10:42:55 AM |
|
Latest update... To purchase the S17, S17+, T17 firmware you will need a minimum of 100 miners currently. If you are interested in using my mod firmware on your farm contact me with your contact details and I will have someone from the sale or deployment team contact you.
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
ralph53
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 26, 2020, 06:31:04 PM |
|
for the z11e series, when I increase the frequency, should I also increase the mv voltage?
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
February 27, 2020, 01:29:44 AM |
|
for the z11e series, when I increase the frequency, should I also increase the mv voltage?
yes you can increase to about 910-940 with a 1800 watt psu
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
ralph53
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 27, 2020, 07:53:49 PM |
|
for the z11e series, when I increase the frequency, should I also increase the mv voltage?
yes you can increase to about 910-940 with a 1800 watt psu great, thank you
|
|
|
|
ralph53
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 28, 2020, 04:11:51 PM |
|
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
|
|
|
|
NikiKa
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 28, 2020, 11:13:59 PM |
|
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
What max hashrate you get from Z11e ?
|
|
|
|
ralph53
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 29, 2020, 02:03:47 AM |
|
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
What max hashrate you get from Z11e ? I'm only been trying to overclock for a few days now. I seem to be varying between 77k to 80k. I'm hoping to get more out of it over the coming days
|
|
|
|
NikiKa
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 29, 2020, 08:48:57 AM |
|
is there a sweet spot for the z11e or does it vary from machine to machine? at 756 freq and 895 mv the machine crashed after about 12 hours. I'm plugged into a 220 outlet with 1800 bitmain psu so I know I can keep increasing power but was hoping to keep electric consumption down to lowest levels possible with most bang for the buck
What max hashrate you get from Z11e ? I'm only been trying to overclock for a few days now. I seem to be varying between 77k to 80k. I'm hoping to get more out of it over the coming days Thank You !
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
March 09, 2020, 07:55:04 AM |
|
Thread is now close due to not enough time to maintain it. You can catch up on Discord server Chipless-Mods https://discord.gg/vcwTB6h
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
|