eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 26, 2019, 05:07:53 PM |
|
Hello miner friends, I have some issues and questions if you kind enough to help me.
1. It shows too many discarded in miner interface. Like when I have 3000 accepted, like 35.000 discarded. Its same for all devices I have. Is it bug in visual or what is it how to prevent?
2. One of my miner hash with 0 on all three boards. I checked kernel log and saw these in particular: Total valid nonce number 0(shows like 2 3 times) All chip cores opened FAIL These logs points to my network or what?
I really could not find a Clear info for both of my concerns. I hope I can get some answer from some experienced miner fellas.
|
|
|
|
Artemis3
Legendary
Offline
Activity: 2030
Merit: 1573
CLEAN non GPL infringing code made in Rust lang
|
|
April 26, 2019, 05:29:46 PM |
|
Hello miner friends, I have some issues and questions if you kind enough to help me.
1. It shows too many discarded in miner interface. Like when I have 3000 accepted, like 35.000 discarded. Its same for all devices I have. Is it bug in visual or what is it how to prevent?
2. One of my miner hash with 0 on all three boards. I checked kernel log and saw these in particular: Total valid nonce number 0(shows like 2 3 times) All chip cores opened FAIL These logs points to my network or what?
I really could not find a Clear info for both of my concerns. I hope I can get some answer from some experienced miner fellas.
For number 1 try to disable LPM and ELPM. If this works, try a different pool. For number 2 you need to test the Asic boards one by one, perhaps try a different PSU, and a different controller. You could also try moving the asic board to your working miner to see if it works there.
|
█████████████████████████ ██████████████████████████ ██████████████████████████ ███████████████████████████ | BRAIINS OS+| | AUTOTUNING MINING FIRMWARE| | Increase hashrate on your Bitcoin ASICs, improve efficiency as much as 25%, and get 0% pool fees on Braiins Pool | |
|
|
|
eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 26, 2019, 05:55:52 PM Last edit: April 27, 2019, 12:12:27 AM by frodocooper |
|
For number 1 try to disable LPM and ELPM. If this works, try a different pool.
For number 2 you need to test the Asic boards one by one, perhaps try a different PSU, and a different controller. You could also try moving the asic board to your working miner to see if it works there.
I tried disabling LPM and ELPM and still very high discarded. About 2, I will try putting asic boards in a working miner and if they work, then problem must be controller board right?
|
|
|
|
Artemis3
Legendary
Offline
Activity: 2030
Merit: 1573
CLEAN non GPL infringing code made in Rust lang
|
|
April 26, 2019, 06:10:47 PM Last edit: April 27, 2019, 12:12:53 AM by frodocooper |
|
I tried disabling LPM and ELPM and still very high discarded. About 2, I will try putting asic boards in a working miner and if they work, then problem must be controller board right?
Yes, but test them one by one in a working miner, ie, turn it on with only one board connected at a time. You can also try swapping data cables, and power cables from the PSU. If they still don't work with a miner you know its good with its own asic boards, they are likely bad.
|
█████████████████████████ ██████████████████████████ ██████████████████████████ ███████████████████████████ | BRAIINS OS+| | AUTOTUNING MINING FIRMWARE| | Increase hashrate on your Bitcoin ASICs, improve efficiency as much as 25%, and get 0% pool fees on Braiins Pool | |
|
|
|
VRobb
|
|
April 26, 2019, 06:12:20 PM |
|
Is the poolside hash rate reading correct? Are you running a high diff on your miners? High rate of discards is not necessarily a problem, depends on other things.
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 26, 2019, 06:18:22 PM |
|
Is the poolside hash rate reading correct? Are you running a high diff on your miners? High rate of discards is not necessarily a problem, depends on other things.
Yes it reads correct, if you asking the diffA rate its very low like 0,003. I checked other miners kernel log and they all show like: Total valid nonce 54000 Requested nonce 54000 But in this ones log, its 0 valid nonce and requestes 54000. Is not that give any clue about what is causing the issue? And I will try asic boards one by one and whole together if they work as one on a different miner as Artemis3 said. Btw one more piece of info here, It does not show the temp values too for these 3 boards. Shows just 0.000 for all three hashrates.
|
|
|
|
VRobb
|
|
April 26, 2019, 06:33:44 PM Last edit: April 26, 2019, 06:56:21 PM by VRobb |
|
If the poolside hashrate reads correct you have no problems! -- Oh, I see, that's very different. Getting nothing poolside is more than just lots of discards, there's something else going on to cause it. You're sure your LAN is good?
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 26, 2019, 06:52:57 PM Last edit: April 27, 2019, 12:13:57 AM by frodocooper |
|
If the poolside hashrate reads correct you have no problems! Ah No I mean pool reads correct for other Miners. Since this has 0 th/s pool does not even see this worker. 3 boards with 0 th/s still :/
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3822
Merit: 2700
Evil beware: We have waffles!
|
|
April 26, 2019, 07:03:36 PM |
|
Do the pools report as being alive? If not, check your user settings: If you used copy/paste to put in the pool address/worker names you probably have a whitespace at the end of them which will stop everything.... If the space is there delete it and try again.
|
|
|
|
eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 26, 2019, 07:41:03 PM Last edit: April 27, 2019, 12:14:25 AM by frodocooper |
|
Do the pools report as being alive? If not, check your user settings: If you used copy/paste to put in the pool address/worker names you probably have a whitespace at the end of them which will stop everything.... If the space is there delete it and try again.
Sir, the pool does not even recognize that miner and I though its coz it has 0 hashrate. It should still recognize? There is issue with miner network?
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3822
Merit: 2700
Evil beware: We have waffles!
|
|
April 26, 2019, 08:10:13 PM |
|
AFAIK even if the miner does not hash from bad controller or hash boards the miner GUI should still show the pool(s) as being alive because they did connect. If the GUI shows the pool as dead check for the spaces at end of addresses.
|
|
|
|
eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 26, 2019, 09:19:21 PM Last edit: April 27, 2019, 12:14:49 AM by frodocooper |
|
AFAIK even if the miner does not hash from bad controller or hash boards the miner GUI should still show the pool(s) as being alive because they did connect. If the GUI shows the pool as dead check for the spaces at end of addresses.
I have changed nothing and It started to hash 30 minutes ago. Dunno what is wrong but Im concerned about it happening again.. Could it be issue with internet connection or Psu? If it was asic boards or controller issue, It would not work well as its now right?
|
|
|
|
VRobb
|
|
April 27, 2019, 01:14:07 AM |
|
Could be, but good news it is running for you again. I'd think Internet connection might be suspect, or your internal LAN. Cheers, and Mine On!
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
BitMaxz
Legendary
Offline
Activity: 3444
Merit: 3172
Playbet.io - Crypto Casino and Sportsbook
|
|
April 27, 2019, 06:37:52 PM Last edit: April 28, 2019, 11:19:33 PM by frodocooper |
|
Agree with VRobb, Also change your network settings to static because sometimes I solved this issue by adding google DNS. Check this guide from bitmain how to set network to static. Sample settings below.
|
|
|
|
eotrix (OP)
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
April 27, 2019, 11:19:13 PM |
|
I appreciate every bit of help, thank you. Its working fine so far, will try the dns thing happens again
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2422
Merit: 6622
be constructive or S.T.F.U
|
|
April 27, 2019, 11:30:50 PM Last edit: April 28, 2019, 11:20:09 PM by frodocooper |
|
I don't want to be mean, but this is a terrible way of reporting an issue, you provided little to know details that could help troubleshoot your problem, please refer to this > https://bitcointalk.org/index.php?topic=5133468.0 and try to provide such details. 1- as far as the discarded shares, don't worry about it, as long as the hashrate is good on the pool side you are good. 2- the 0 hashrate is very possibly an internet / network related issue as others have mentioned, if you posted the kernel log and screenshots it would have been easier to troubleshoot.
|
|
|
|
tim-bc
|
|
April 30, 2019, 03:36:43 PM |
|
Discarded shares is a useless, meaningless stat. It was only a useful stat for pool operators back in the days when getwork was used for mining. https://bitcointalk.org/index.php?topic=1177988.msg12402249#msg12402249Otherwise, make sure to post your kernel logs next time like mikeywith recommended.
|
Ignore scammers on Skype, Telegram, etc. I will only ever contact you via forum PMs. See profile for fingerprint.
|
|
|
|