rotem8866 (OP)
Newbie
 Offline
Activity: 46
Merit: 0
|
 |
May 13, 2019, 07:06:30 AM
Last edit: May 14, 2019, 12:27:02 PM by frodocooper |
|
Hello after using the machine few month (warrenty ended) , i suddently cant see any of the hash boards. what should i do ? attached ss and kernel logs. thank you [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000293] ps7-ttc #0 at df804000, irq=43
[ 0.000594] Console: colour dummy device 80x30
[ 0.000623] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090241] pid_max: default: 32768 minimum: 301
[ 0.090446] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092621] CPU: Testing write buffer coherency: ok
[ 0.092932] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.092988] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.093207] L310 cache controller enabled
[ 0.093227] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.170983] CPU1: Booted secondary processor
[ 0.260218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260346] Brought up 2 CPUs
[ 0.260364] SMP: Total of 2 processors activated.
[ 0.260372] CPU: All CPU(s) started in SVC mode.
[ 0.261027] devtmpfs: initialized
[ 0.263458] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264641] regulator-dummy: no parameters
[ 0.271500] NET: Registered protocol family 16
[ 0.273712] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.275972] cpuidle: using governor ladder
[ 0.275985] cpuidle: using governor menu
[ 0.283381] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.284889] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.284902] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285014] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.307142] bio: create slab <bio-0> at 0
[ 0.308495] vgaarb: loaded
[ 0.309198] SCSI subsystem initialized
[ 0.310042] usbcore: registered new interface driver usbfs
[ 0.310355] usbcore: registered new interface driver hub
[ 0.310580] usbcore: registered new device driver usb
[ 0.311097] media: Linux media interface: v0.10
[ 0.311272] Linux video capture interface: v2.00
[ 0.311509] pps_core: LinuxPPS API ver. 1 registered
[ 0.311521] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.311643] PTP clock support registered
[ 0.312001] EDAC MC: Ver: 3.0.0
[ 0.313194] Advanced Linux Sound Architecture Driver Initialized.
[ 0.315933] DMA-API: preallocated 4096 debug entries
[ 0.315946] DMA-API: debugging enabled by kernel config
[ 0.316017] Switched to clocksource arm_global_timer
[ 0.336538] NET: Registered protocol family 2
[ 0.337185] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337242] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337327] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337368] TCP: reno registered
[ 0.337384] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337415] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337648] NET: Registered protocol family 1
[ 0.337970] RPC: Registered named UNIX socket transport module.
[ 0.337982] RPC: Registered udp transport module.
[ 0.337990] RPC: Registered tcp transport module.
[ 0.337998] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338009] PCI: CLS 0 bytes, default 64
[ 0.338425] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.340405] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342444] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.342638] msgmni has been set to 967
[ 0.343395] io scheduler noop registered
[ 0.343408] io scheduler deadline registered
[ 0.343447] io scheduler cfq registered (default)
[ 0.354000] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.354020] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.477838] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.045368] console [ttyPS0] enabled
[ 1.049645] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.057258] [drm] Initialized drm 1.1.0 20060810
[ 1.074156] brd: module loaded
[ 1.083549] loop: module loaded
[ 1.092931] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.098911] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.106889] libphy: XEMACPS mii bus: probed
[ 1.111261] ------------- phy_id = 0x3625e62
[ 1.115965] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.124578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.131237] ehci-pci: EHCI PCI platform driver
[ 1.138488] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.145279] usbcore: registered new interface driver usb-storage
[ 1.152152] mousedev: PS/2 mouse device common for all mice
[ 1.158315] i2c /dev entries driver
[ 1.165183] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.170702] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.176617] Xilinx Zynq CpuIdle Driver started
[ 1.181458] sdhci: Secure Digital Host Controller Interface driver
[ 1.187576] sdhci: Copyright(c) Pierre Ossman
[ 1.191889] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.198775] mmc0: no vqmmc regulator found
[ 1.202786] mmc0: no vmmc regulator found
[ 1.246036] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.256880] usbcore: registered new interface driver usbhid
[ 1.262370] usbhid: USB HID core driver
[ 1.267159] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.273430] nand: Micron MT29F2G08ABAEAWP
[ 1.277474] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.283350] Bad block table found at page 131008, version 0x01
[ 1.289573] Bad block table found at page 130944, version 0x01
[ 1.295624] 3 ofpart partitions found on MTD device pl353-nand
[ 1.301393] Creating 3 MTD partitions on "pl353-nand":
[ 1.306520] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.314513] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.321843] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.332568] TCP: cubic registered
[ 1.335807] NET: Registered protocol family 17
[ 1.340529] Registering SWP/SWPB emulation handler
[ 1.346445] regulator-dummy: disabling
[ 1.350727] UBI: attaching mtd1 to ubi0
[ 1.439776] mmc0: new high speed SDHC card at address aaaa
[ 1.445739] mmcblk0: mmc0:aaaa SL32G 29.7 GiB (ro)
[ 1.455925] mmcblk0: p1
[ 1.873803] UBI: scanning is finished
[ 1.885380] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.892462] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.899225] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.905890] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.912768] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.918749] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.925856] UBI: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1885751282
[ 1.934899] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.944114] UBI: background thread "ubi_bgt0d" started, PID 1090
[ 1.944119] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.948060] ALSA device list:
[ 1.948063] No soundcards found.
[ 1.964388] UBIFS: background thread "ubifs_bgt0_0" started, PID 1092
[ 1.993137] UBIFS: recovery needed
[ 2.069137] UBIFS: recovery completed
[ 2.072785] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.078728] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.087835] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.097724] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.102754] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 169D5274-BC1D-448D-AF98-689AB312947D, small LPT model
[ 2.114275] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.121471] devtmpfs: mounted
[ 2.124574] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 2.958343] random: dd urandom read with 9 bits of entropy available
[ 3.396068]
[ 3.396068] bcm54xx_config_init
[ 4.006059]
[ 4.006059] bcm54xx_config_init
[ 7.006890] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.012984] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 23.581765] In axi fpga driver!
[ 23.584838] request_mem_region OK!
[ 23.588262] AXI fpga dev virtual address is 0xdfa00000
[ 23.593333] *base_vir_addr = 0xc51e
[ 23.607982] In fpga mem driver!
[ 23.611295] request_mem_region OK!
[ 23.614858] fpga mem virtual address is 0xe2000000
[ 24.406059]
[ 24.406059] bcm54xx_config_init
[ 25.036062]
[ 25.036062] bcm54xx_config_init
[ 28.036899] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 28.042921] xemacps e000b000.ps7-ethernet: link up (100/FULL)
log_level = 4
This is XILINX board. Totalram: 507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f42000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d3b000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 8048144162bb8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[14] has core num=15
Chain[5] ASIC[43] has core num=15
Chain[5] ASIC[55] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[45] has core num=9
Chain[6] ASIC[50] has core num=15
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[52] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 2198 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:37:08 CST 2019 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8048144162bb8854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=1440
get fan[4] speed=1440
get fan[4] speed=1440
get fan[5] speed=6000
get fan[4] speed=1440
get fan[5] speed=6000
get fan[4] speed=1440
get fan[5] speed=6000
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=890 [91]
Chain[J7] get working chain_voltage_pic=91
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=890 [91]
Chain[J8] get working chain_voltage_pic=91
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ...
max freq = 100
set baud=1
do heat board 8xPatten for 1 times
setStartTimePoint total_tv_start_sys=198 total_tv_end_sys=199
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=2
update - no matter what firmware i try to upload i get the message |
