rotem8866 (OP)
Newbie
Offline
Activity: 46
Merit: 0
|
|
May 13, 2019, 07:06:30 AM Last edit: May 14, 2019, 12:27:02 PM by frodocooper |
|
Hello after using the machine few month (warrenty ended) , i suddently cant see any of the hash boards. what should i do ? attached ss and kernel logs. thank you [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: CMA: reserved 128 MiB at 16800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 126976 [ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768 [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984 [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB) [ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB) [ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB) [ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ps7-slcr mapped to df802000 [ 0.000000] zynq_clock_init: clkc starts at df802100 [ 0.000000] Zynq clock init [ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns [ 0.000293] ps7-ttc #0 at df804000, irq=43 [ 0.000594] Console: colour dummy device 80x30 [ 0.000623] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096) [ 0.090241] pid_max: default: 32768 minimum: 301 [ 0.090446] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.092621] CPU: Testing write buffer coherency: ok [ 0.092932] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.092988] Setting up static identity map for 0x4cb118 - 0x4cb170 [ 0.093207] L310 cache controller enabled [ 0.093227] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB [ 0.170983] CPU1: Booted secondary processor [ 0.260218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.260346] Brought up 2 CPUs [ 0.260364] SMP: Total of 2 processors activated. [ 0.260372] CPU: All CPU(s) started in SVC mode. [ 0.261027] devtmpfs: initialized [ 0.263458] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.264641] regulator-dummy: no parameters [ 0.271500] NET: Registered protocol family 16 [ 0.273712] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.275972] cpuidle: using governor ladder [ 0.275985] cpuidle: using governor menu [ 0.283381] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered [ 0.284889] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.284902] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.285014] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000 [ 0.307142] bio: create slab <bio-0> at 0 [ 0.308495] vgaarb: loaded [ 0.309198] SCSI subsystem initialized [ 0.310042] usbcore: registered new interface driver usbfs [ 0.310355] usbcore: registered new interface driver hub [ 0.310580] usbcore: registered new device driver usb [ 0.311097] media: Linux media interface: v0.10 [ 0.311272] Linux video capture interface: v2.00 [ 0.311509] pps_core: LinuxPPS API ver. 1 registered [ 0.311521] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.311643] PTP clock support registered [ 0.312001] EDAC MC: Ver: 3.0.0 [ 0.313194] Advanced Linux Sound Architecture Driver Initialized. [ 0.315933] DMA-API: preallocated 4096 debug entries [ 0.315946] DMA-API: debugging enabled by kernel config [ 0.316017] Switched to clocksource arm_global_timer [ 0.336538] NET: Registered protocol family 2 [ 0.337185] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.337242] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.337327] TCP: Hash tables configured (established 4096 bind 4096) [ 0.337368] TCP: reno registered [ 0.337384] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.337415] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.337648] NET: Registered protocol family 1 [ 0.337970] RPC: Registered named UNIX socket transport module. [ 0.337982] RPC: Registered udp transport module. [ 0.337990] RPC: Registered tcp transport module. [ 0.337998] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.338009] PCI: CLS 0 bytes, default 64 [ 0.338425] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.340405] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.342444] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.342638] msgmni has been set to 967 [ 0.343395] io scheduler noop registered [ 0.343408] io scheduler deadline registered [ 0.343447] io scheduler cfq registered (default) [ 0.354000] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208 [ 0.354020] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.477838] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps [ 1.045368] console [ttyPS0] enabled [ 1.049645] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000 [ 1.057258] [drm] Initialized drm 1.1.0 20060810 [ 1.074156] brd: module loaded [ 1.083549] loop: module loaded [ 1.092931] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.098911] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.106889] libphy: XEMACPS mii bus: probed [ 1.111261] ------------- phy_id = 0x3625e62 [ 1.115965] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 [ 1.124578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.131237] ehci-pci: EHCI PCI platform driver [ 1.138488] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing? [ 1.145279] usbcore: registered new interface driver usb-storage [ 1.152152] mousedev: PS/2 mouse device common for all mice [ 1.158315] i2c /dev entries driver [ 1.165183] zynq-edac f8006000.ps7-ddrc: ecc not enabled [ 1.170702] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.176617] Xilinx Zynq CpuIdle Driver started [ 1.181458] sdhci: Secure Digital Host Controller Interface driver [ 1.187576] sdhci: Copyright(c) Pierre Ossman [ 1.191889] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.198775] mmc0: no vqmmc regulator found [ 1.202786] mmc0: no vmmc regulator found [ 1.246036] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.256880] usbcore: registered new interface driver usbhid [ 1.262370] usbhid: USB HID core driver [ 1.267159] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.273430] nand: Micron MT29F2G08ABAEAWP [ 1.277474] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 1.283350] Bad block table found at page 131008, version 0x01 [ 1.289573] Bad block table found at page 130944, version 0x01 [ 1.295624] 3 ofpart partitions found on MTD device pl353-nand [ 1.301393] Creating 3 MTD partitions on "pl353-nand": [ 1.306520] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel" [ 1.314513] 0x000002000000-0x00000b000000 : "angstram-rootfs" [ 1.321843] 0x00000b000000-0x000010000000 : "upgrade-rootfs" [ 1.332568] TCP: cubic registered [ 1.335807] NET: Registered protocol family 17 [ 1.340529] Registering SWP/SWPB emulation handler [ 1.346445] regulator-dummy: disabling [ 1.350727] UBI: attaching mtd1 to ubi0 [ 1.439776] mmc0: new high speed SDHC card at address aaaa [ 1.445739] mmcblk0: mmc0:aaaa SL32G 29.7 GiB (ro) [ 1.455925] mmcblk0: p1 [ 1.873803] UBI: scanning is finished [ 1.885380] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0 [ 1.892462] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.899225] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.905890] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.912768] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 [ 1.918749] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.925856] UBI: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1885751282 [ 1.934899] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40 [ 1.944114] UBI: background thread "ubi_bgt0d" started, PID 1090 [ 1.944119] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.948060] ALSA device list: [ 1.948063] No soundcards found. [ 1.964388] UBIFS: background thread "ubifs_bgt0_0" started, PID 1092 [ 1.993137] UBIFS: recovery needed [ 2.069137] UBIFS: recovery completed [ 2.072785] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.078728] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.087835] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.097724] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.102754] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 169D5274-BC1D-448D-AF98-689AB312947D, small LPT model [ 2.114275] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 2.121471] devtmpfs: mounted [ 2.124574] Freeing unused kernel memory: 204K (c06db000 - c070e000) [ 2.958343] random: dd urandom read with 9 bits of entropy available [ 3.396068] [ 3.396068] bcm54xx_config_init [ 4.006059] [ 4.006059] bcm54xx_config_init [ 7.006890] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 7.012984] xemacps e000b000.ps7-ethernet: link up (100/FULL) [ 23.581765] In axi fpga driver! [ 23.584838] request_mem_region OK! [ 23.588262] AXI fpga dev virtual address is 0xdfa00000 [ 23.593333] *base_vir_addr = 0xc51e [ 23.607982] In fpga mem driver! [ 23.611295] request_mem_region OK! [ 23.614858] fpga mem virtual address is 0xe2000000 [ 24.406059] [ 24.406059] bcm54xx_config_init [ 25.036062] [ 25.036062] bcm54xx_config_init [ 28.036899] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 28.042921] xemacps e000b000.ps7-ethernet: link up (100/FULL) log_level = 4 This is XILINX board. Totalram: 507486208 Detect 512MB control board of XILINX mmap axi_fpga_addr = 0xb6f42000 axi_fpga_addr data = 0xc51e mmap fpga_mem_addr = 0xb5d3b000 forceFreq=-1 forceFlag=0 min work minertest[0]:912
DETECT HW version=0000c51e miner ID : 8048144162bb8854 Miner Type = S9 AsicType = 1387 real AsicNum = 63 use critical mode to search freq... get PLUG ON=0x000000e0 Find hashboard on Chain[5] Find hashboard on Chain[6] Find hashboard on Chain[7] Check chain[5] PIC fw version=0x03 Check chain[6] PIC fw version=0x03 Check chain[7] PIC fw version=0x03 read pic freq and badcore num... chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[5] has freq in PIC and will jump over... Chain[5] has core num in PIC Chain[5] ASIC[14] has core num=15 Chain[5] ASIC[43] has core num=15 Chain[5] ASIC[55] has core num=1 Check chain[5] PIC fw version=0x03 read pic freq and badcore num... chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[6] has freq in PIC and will jump over... Chain[6] has core num in PIC Chain[6] ASIC[45] has core num=9 Chain[6] ASIC[50] has core num=15 Check chain[6] PIC fw version=0x03 read pic freq and badcore num... chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[7] has freq in PIC and will jump over... Chain[7] has core num in PIC Chain[7] ASIC[52] has core num=15 Check chain[7] PIC fw version=0x03 get PIC voltage=6 on chain[5], value=940 get PIC voltage=6 on chain[6], value=940 get PIC voltage=6 on chain[7], value=940 chain[5] temp offset record: 62,0,0,0,0,0,35,28 chain[5] temp chip I2C addr=0x98 chain[5] has no middle temp, use special fix mode. chain[6] temp offset record: 62,0,0,0,0,0,35,28 chain[6] temp chip I2C addr=0x98 chain[6] has no middle temp, use special fix mode. chain[7] temp offset record: 62,0,0,0,0,0,35,28 chain[7] temp chip I2C addr=0x98 chain[7] has no middle temp, use special fix mode. total_exist_chain_num = 3 CRC error counter=0 set command mode to VIL
--- check asic number After Get ASIC NUM CRC error counter=0 set_baud=0 The min freq=700 set real timeout 52, need sleep=379392 After TEST CRC error counter=0 search freq for 1 times, completed chain = 3, total chain num = 3 single_board_frq_tuning enter min_rate, des_rate, fix_volt:13800, 14000, 880 force_freq not set, don't need tuning restart Miner chance num=2 waiting for receive_func to exit! waiting for pic heart to exit! bmminer not found= 2198 root 0:00 grep bmminer
bmminer not found, restart bmminer ... This is user mode for mining Detect 512MB control board of XILINX Miner Type = S9 Miner compile time: Mon Mar 4 11:37:08 CST 2019 type: Antminer S9set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff miner ID : 8048144162bb8854 set_reset_allhashboard = 0x0000ffff Checking fans!get fan[4] speed=1440 get fan[4] speed=1440 get fan[4] speed=1440 get fan[5] speed=6000 get fan[4] speed=1440 get fan[5] speed=6000 get fan[4] speed=1440 get fan[5] speed=6000 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J6] has backup chain_voltage=890 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J7] has backup chain_voltage=890 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J8] has backup chain_voltage=890 Check chain[7] PIC fw version=0x03 Chain[J6] orignal chain_voltage_pic=6 value=940 Chain[J6] will use backup chain_voltage_pic=890 [91] Chain[J6] get working chain_voltage_pic=91 Chain[J7] orignal chain_voltage_pic=6 value=940 Chain[J7] will use backup chain_voltage_pic=890 [91] Chain[J7] get working chain_voltage_pic=91 Chain[J8] orignal chain_voltage_pic=6 value=940 Chain[J8] will use backup chain_voltage_pic=890 [91] Chain[J8] get working chain_voltage_pic=91 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 0 asic Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic set_reset_hashboard = 0x00000040 set_reset_hashboard = 0x00000000 retry Chain[J7] has 0 asic Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 0 asic miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ... max freq = 100 set baud=1 do heat board 8xPatten for 1 times setStartTimePoint total_tv_start_sys=198 total_tv_end_sys=199 restartNum = 2 , auto-reinit enabled... do read_temp_func once... do check_asic_reg 0x08 Done check_asic_reg set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0 set full FAN speed... FAN PWM: 100 read_temp_func Done! CRC error counter=2
https://www.photobox.co.uk/my/photo/full?photo_id=501859379059
update - no matter what firmware i try to upload i get the message
|