Bitcoin Forum
September 20, 2019, 06:40:27 AM *
News: Latest Bitcoin Core release: 0.18.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: [Reference] May 2019 "Multi-Level" menu values  (Read 111 times)
tim-bc
Full Member
***
Offline Offline

Activity: 490
Merit: 140


View Profile
July 17, 2019, 07:39:34 PM
Last edit: July 17, 2019, 08:15:46 PM by tim-bc
Merited by frodocooper (10), philipma1957 (2), BitMaxz (1)
 #1

Disclaimer : 2019 firmware versions disable SSH access.

So during my journey to automate configuration of miners using set_miner_conf.cgi rather than SSH, I found that the drop-down efficiency menu on the configuration page has some numerical values which you need to know in order to construct the data from scratch:

Code:
1   : Normal
228 : HashRate+2.0TH/S
227 : HashRate+1.5TH/S
226 : HashRate+1.0TH/S
225 : HashRate+0.5TH/S
250 : HashRate Unchanged-Lower Voltage
241 : HashRate-0.5TH/S
242 : HashRate-1.0TH/S
243 : HashRate-1.5TH/S
244 : HashRate-2.0TH/S
245 : HashRate-2.5TH/S
246 : HashRate-3.0TH/S
240 : Low Power Enhanced Mode

So the data string to set to enhanced LPM (on default pools) would look something like this (*colons should be encoded as %3A* notice the 240 at the end):

Code:
_ant_pool1url=stratum.antpool.com:3333&_ant_pool1user=antminer_1&_ant_pool1pw=123&_ant_pool2url=stratum.antpool.com:443&_ant_pool2user=antminer_1&_ant_pool2pw=123&_ant_pool3url=stratum.antpool.com:25&_ant_pool3user=antminer_1&_ant_pool3pw=123&_ant_nobeeper=false&_ant_notempoverctrl=false&_ant_fan_customize_switch=false&_ant_fan_customize_value=&_ant_freq=&_ant_asic_boost=false&_ant_low_vol_freq=false&_ant_economic_mode=false&_ant_multi_level=240

For example, in bash I can put this data into the $data variable, and send it to set_miner_conf.cgi like so (with $1 = ip and $2 = web password):

Code:
curl --anyauth --user root:$2 -i -H "Accept: application/json" -H "Content-Type:application/json" -X POST -d "$data" "http://$1/cgi-bin/set_miner_conf.cgi"

Lastly, sometimes you may only want to change the efficiency mode without altering the pools. No need to hardcode the pools, you can get them from the miner even when API is down. By using mapfile, you will preserve empty fields, such as blank passwords or no third pool:

Code:
$ mapfile -t pools < <(curl -s --anyauth --user root:$2 $1/cgi-bin/minerConfiguration.cgi | grep -e '"url' -e '"user' -e '"pass' | cut -d ":" -f2- | cut -d '"' -f2)
$ printf '%s\n' "${pools[@]}"

stratum.antpool.com:3333
antminer_1
123
stratum.antpool.com:443
antminer_1
123
stratum.antpool.com:25
antminer_1
123


Ignore scammers on Skype, Telegram, etc. I will only ever contact you via forum PMs. See profile for fingerprint.
1568961627
Hero Member
*
Offline Offline

Posts: 1568961627

View Profile Personal Message (Offline)

Ignore
1568961627
Reply with quote  #2

1568961627
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1568961627
Hero Member
*
Offline Offline

Posts: 1568961627

View Profile Personal Message (Offline)

Ignore
1568961627
Reply with quote  #2

1568961627
Report to moderator
s3binator
Newbie
*
Offline Offline

Activity: 11
Merit: 16


View Profile
August 03, 2019, 04:15:13 PM
Last edit: August 05, 2019, 12:58:15 AM by frodocooper
Merited by frodocooper (10), BitMaxz (1), tim-bc (1)
 #2

So I wanted to contribute by showing how I did this using requests, but I have a little snag EDIT: FIXED. Everything works except for the working mode never updates. The config file that is loaded when loading the configuration page gives

Code:
"bitmain-low-vol" : "",

No matter what I place into the '_ant_multi_level' field, it's always blank, and this forces Working Mode to be set to Normal via the get_miner_conf javascript function.

I unpacked the newest firmware, and found the set_miner_config.cgi file. It looks like this:

Code:
#!/bin/sh
#set -x

ant_pool1url=
ant_pool1user=
ant_pool1pw=
ant_pool2url=
ant_pool2user=
ant_pool2pw=
ant_pool3url=
ant_pool3user=
ant_pool3pw=
ant_nobeeper=
ant_notempoverctrl=
ant_fan_customize_value=
ant_fan_customize_switch=
ant_freq=
ant_voltage=
ant_asic_boost=
ant_low_vol_freq=
ant_economic_mode=
ant_low_vol=


ant_input=`cat /dev/stdin`
ant_tmp=${ant_input//&/ }
i=0
for ant_var in ${ant_tmp}
do
ant_var=${ant_var//+/ }
ant_var=${ant_var//%23/#}
ant_var=${ant_var//%24/$}
ant_var=${ant_var//%25/%}
ant_var=${ant_var//%26/&}
ant_var=${ant_var//%2C/,}
ant_var=${ant_var//%2B/+}
ant_var=${ant_var//%3A/:}
ant_var=${ant_var//%3B/;}
ant_var=${ant_var//%3C/<}
ant_var=${ant_var//%3D/=}
ant_var=${ant_var//%3E/>}
ant_var=${ant_var//%3F/?}
ant_var=${ant_var//%40/@}
ant_var=${ant_var//%5B/[}
ant_var=${ant_var//%5D/]}
ant_var=${ant_var//%5E/^}
ant_var=${ant_var//%7B/\{}
ant_var=${ant_var//%7C/|}
ant_var=${ant_var//%7D/\}}
ant_var=${ant_var//%2F/\/}
#ant_var=${ant_var//%22/\"}
#ant_var=${ant_var//%5C/\\}
case ${i} in
0 )
ant_pool1url=${ant_var/_ant_pool1url=/}
;;
1 )
ant_pool1user=${ant_var/_ant_pool1user=/}
;;
2 )
ant_pool1pw=${ant_var/_ant_pool1pw=/}
;;
3 )
ant_pool2url=${ant_var/_ant_pool2url=/}
;;
4 )
ant_pool2user=${ant_var/_ant_pool2user=/}
;;
5 )
ant_pool2pw=${ant_var/_ant_pool2pw=/}
;;
6 )
ant_pool3url=${ant_var/_ant_pool3url=/}
;;
7 )
ant_pool3user=${ant_var/_ant_pool3user=/}
;;
8 )
ant_pool3pw=${ant_var/_ant_pool3pw=/}
;;
9 )
ant_nobeeper=${ant_var/_ant_nobeeper=/}
;;
10 )
ant_notempoverctrl=${ant_var/_ant_notempoverctrl=/}
;;
11 )
ant_fan_customize_switch=${ant_var/_ant_fan_customize_switch=/}
;;
12 )
ant_fan_customize_value=${ant_var/_ant_fan_customize_value=/}
;;
13 )
ant_freq=${ant_var/_ant_freq=/}
;;
14 )
ant_voltage=${ant_var/_ant_voltage=/}
;;
15 )
ant_asic_boost=${ant_var/_ant_asic_boost=/}
;;
16 )
ant_low_vol_freq=${ant_var/_ant_low_vol_freq=/}
;;
17 )
ant_economic_mode=${ant_var/_ant_economic_mode=/}
;;
18 )
ant_low_vol=${ant_var/_ant_multi_level=/}
;;
esac
i=`expr $i + 1`
done

echo "{" >  /config/bmminer.conf
echo "\"pools\" : [" >> /config/bmminer.conf
echo "{" >> /config/bmminer.conf
echo "\"url\" : \"${ant_pool1url}\"," >> /config/bmminer.conf
echo "\"user\" : \"${ant_pool1user}\"," >> /config/bmminer.conf
echo "\"pass\" : \"${ant_pool1pw}\"" >> /config/bmminer.conf
echo "}," >> /config/bmminer.conf
echo "{" >> /config/bmminer.conf
echo "\"url\" : \"${ant_pool2url}\"," >> /config/bmminer.conf
echo "\"user\" : \"${ant_pool2user}\"," >> /config/bmminer.conf
echo "\"pass\" : \"${ant_pool2pw}\"" >> /config/bmminer.conf
echo "}," >> /config/bmminer.conf
echo "{" >> /config/bmminer.conf
echo "\"url\" : \"${ant_pool3url}\"," >> /config/bmminer.conf
echo "\"user\" : \"${ant_pool3user}\"," >> /config/bmminer.conf
echo "\"pass\" : \"${ant_pool3pw}\"" >> /config/bmminer.conf
echo "}" >> /config/bmminer.conf
echo "]" >> /config/bmminer.conf
echo "," >> /config/bmminer.conf
echo "\"api-listen\" : true," >> /config/bmminer.conf
echo "\"api-network\" : true," >> /config/bmminer.conf
echo "\"api-groups\" : \"A:stats:pools:devs:summary:version\","                          >> /config/bmminer.conf
echo "\"api-allow\" : \"A:0/0,W:*\","                       >> /config/bmminer.conf
if [ "${ant_nobeeper}" = "true" ]; then
echo "\"bitmain-nobeeper\" : "true"," >> /config/bmminer.conf
fi
if [ "${ant_notempoverctrl}" = "true" ]; then
echo "\"bitmain-notempoverctrl\" : "true"," >> /config/bmminer.conf
fi

if [ "${ant_fan_customize_switch}" = "true" ]; then
echo "\"bitmain-fan-ctrl\" : "true"," >> /config/bmminer.conf
echo "\"bitmain-fan-pwm\" : \"${ant_fan_customize_value}\"," >> /config/bmminer.conf

fi
echo "\"bitmain-use-vil\" : "true"," >> /config/bmminer.conf
echo "\"bitmain-freq\" : \"${ant_freq}\"," >> /config/bmminer.conf
#if [ "${ant_asic_boost}" = "true" ]; then
#    echo "\"bitmain-close-asic-boost\" : true," >> /config/bmminer.conf
#fi
if [ "${ant_low_vol_freq}" = "true" ]; then
    echo "\"bitmain-close-low-vol-freq\" : true," >> /config/bmminer.conf
fi
if [ "${ant_economic_mode}" = "true" ]; then
    echo "\"bitmain-economic-mode\" : true," >> /config/bmminer.conf
fi

echo "\"bitmain-low-vol\" : \"${ant_low_vol}\"," >> /config/bmminer.conf

echo "\"bitmain-voltage\" : \"0706\"" >> /config/bmminer.conf
echo "}"        >> /config/bmminer.conf
sync &
sleep 1s

# cp /www/pages/cgi-bin/minerConfiguration2.cgi /www/pages/cgi-bin/minerConfiguration.cgi -f
sync

/etc/init.d/bmminer.sh restart >/dev/null 2>&1

sleep 5s

echo "ok"

It seems like the code I provide below should work. Are there any suggestions or thoughts? Note: The URLEncode line below my dictionary converts the dictionary into the same format as Tim's data.

EDIT: There was one field missing '_ant_voltage', in both Tim's and my data payload. This missing field caused the set_miner_conf.cgi bash script to improperly read what was sent after the '_ant_freq' field. I have updated the code below to working code, along with a working payload for curl.

Code:
from requests.auth import HTTPDigestAuth
import requests
import urllib.parse

ip = 'ip'
url = 'http://' + ip + '/cgi-bin/set_miner_conf.cgi'
data = {}
data['_ant_pool1url'] = 'url1'
data['_ant_pool1user'] = 'user1'
data['_ant_pool1pw'] = 'x'
data['_ant_pool2url'] = 'url2'
data['_ant_pool2user'] = 'user2'
data['_ant_pool2pw'] = 'x'
data['_ant_pool3url'] = 'url3'
data['_ant_pool3user'] = 'user3'
data['_ant_pool3pw'] = 'x'
data['_ant_nobeeper'] = 'false'
data['_ant_notempoverctrl'] = 'false'
data['_ant_fan_customize_switch'] = 'false'
data['_ant_fan_customize_value'] = ''
data['_ant_freq'] = ''
data['_ant_voltage'] = ''
data['_ant_asic_boost'] = 'false'
data['_ant_low_vol_freq'] = 'false'
data['_ant_economic_mode'] = 'false'
data['_ant_multi_level'] = '240'
payload = urllib.parse.urlencode(data)
r = requests.post(url, auth=HTTPDigestAuth('root', 'root'), data=payload)

The payload is the string:

Code:
_ant_pool1url=url1&_ant_pool1user=user1&_ant_pool1pw=x&_ant_pool2url=url2&_ant_pool2user=user2&_ant_pool2pw=x&_ant_pool3url=url3&_ant_pool3user=user3&_ant_pool3pw=x&_ant_nobeeper=false&_ant_notempoverctrl=false&_ant_fan_customize_switch=false&_ant_fan_customize_value=&_ant_freq=&_ant_voltage=&_ant_asic_boost=false&_ant_low_vol_freq=true&_ant_economic_mode=false&_ant_multi_level=240

The above string can be used with curl, as shown by Tim in the original post.
tim-bc
Full Member
***
Offline Offline

Activity: 490
Merit: 140


View Profile
August 21, 2019, 10:25:51 PM
Merited by frodocooper (10), BitMaxz (1)
 #3

updated the code below to working code, along with a working payload for curl.[/b]
EDIT: There was one field missing '_ant_voltage'

Thanks for catching that! I actually discovered that I had left out _ant_voltage shortly after, at first I had tested changing from Enhanced -> Normal so I simply assumed everything worked.

I should have posted back here earlier, but unfortunately I've had to take a break from mining for the moment, until we launch a new facility. To make up for it I'd like to share the bash script I've got for this so far.

Code:
#!/bin/bash

# Antminer configuration via web portal

# Argument1 = IP Address
# Argument2 = Web Password

if timeout 1 ping -c 1 $1 &> /dev/null
then
  # Check firmware version
  version=$(curl -s --anyauth --user root:$2 $1/cgi-bin/get_system_info.cgi | jq '.system_filesystem_version')
  echo "Firmware Version: $version"
  # Get current pool settings
  names=(_ant_pool1url _ant_pool1user _ant_pool1pw _ant_pool2url _ant_pool2user _ant_pool2pw _ant_pool3url _ant_pool3user _ant_pool3pw _ant_nobeeper _ant_notempoverctrl _ant_fan_customize_switch _ant_fan_customize_value _ant_freq _ant_voltage _ant_asic_boost _ant_low_vol_freq _ant_economic_mode _ant_multi_level)
  mapfile -t pools < <(curl -s --anyauth --user root:$2 $1/cgi-bin/minerConfiguration.cgi | grep -e '"url' -e '"user' -e '"pass' | cut -d ":" -f2- | cut -d '"' -f2)
  pools+=('false') #nobeeper
  pools+=('false') #notempoverctrl
  pools+=('false') #fan_customize_switch
  pools+=('')      #fan_customize_value
  pools+=('')      #freq
  pools+=('0706')  #voltage
  # Nov 2018 ends here
  pools+=('false') #asic_boost
  pools+=('false') #low_vol_freq
  pools+=('false') #economic_mode
  # Dec 2018 ends here
  pools+=('240')   #multi_level
  # Set configuration
  data=$(for ((i=0; i< "${#names[@]}"; i++)) do printf "%s=%s&" "${names[$i]}" "${pools[$i]}"; done)
  data=$(echo "${data%?}" | sed 's/:/%3A/g')
  curl --anyauth --user root:$2 -i -H "Accept: application/json" -H "Content-Type:application/json" -X POST -d "$data" "http://$1/cgi-bin/set_miner_conf.cgi"
else
  echo "EXIT: Miner offline"
fi

Also I'm wondering if anyone knows what "economic_mode" is and/or if it does anything. It is present in the Dec 2018 & May 2019 payloads and there's also a hidden checkbox for it on the configuration cgi page. Doesn't seem to do anything as far as I can tell.

Ignore scammers on Skype, Telegram, etc. I will only ever contact you via forum PMs. See profile for fingerprint.
Pages: [1]
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!