[ANN] [POW] [NO ICO] [x16rv2] Pexa Coin - revolutionary suite of blockchain apps

[placeholders]

block height:    34458

so it's been pre-mined for almost 1 week ?

yeah , i am mining it but the fact that it was first (little) announced on medium on 8 july isn't the best thing they could do , why almost 2 weeks later on bitcointalk while you must knew that the most off miners would be right waiting here on bitcointalk , nice mining for 2 weeks but , to be honest , we can't say anything because ,

it was announced

so the good thing is : no pre-,mine

bad thing was : bad announcement on medium only

even worse: there were blocks with 50 coins reward during 1st day of the launch https://www.0769.it/explorer/PEXA?height=1002

first 11k blocks had 50 coins reward each. 550k premine some might say

If you read what the team wrote on discord, there were people in the discord who joined as soon as the medium article was posted. I think you cannot call it a "premine" unless the dev mined it no? They also stated that the error wasn't in the block reward, it was in the difficulty adjustment. The difficulty was not adjusting properly and it caused many blocks to be mined quickly. They fixed the difficulty adjustment and had to also adjust the reward to avoid the entire supply being mined out in a few months.

*shrug* I'm mining it. I like the use case. Gimme those PEXAs

[mys5droid]

EasyX Community Pool

POOL: https://pool.easyx.cc/

EXPLORER: https://pexa.easyx.cc/

PEXACOIN:

1-2 GPU's (0-15MH/s rig):

Code:

-a x16rv2 -o stratum+tcp://pool.easyx.cc:3008 -u WALLETADDRESS.workername -p x

3-15 GPU's (15-400 MH/s rig):

Code:

 -a x16rv2 -o stratum+tcp://pool.easyx.cc:3032 -u WALLETADDRESS.workername -p x

20+ GPU's (400+ MH/s rig):

Code:

 -a x16rv2 -o stratum+tcp://pool.easyx.cc:3256 -u WALLETADDRESS.workername -p x

0% fee for limited time! Rented hash welcome!

NOTE FOR MRR RENTALS ( https://www.miningrigrentals.com/register?ref=2607460 ):
Please use port 3032 even for GH rigs - if rig is less than 30 MH/s use port 3008

See you there

[voteformeg]

EASYXPOOL.TK

0% fee for limited time! Rented hash welcome!

1-2 GPU's:

Code:

-a x16r -o stratum+tcp://192.168.1.10:3008 -u WALLETADDRESS -p x

3-15 GPU's:

Code:

 -a x16r -o stratum+tcp://192.168.1.10:3008 -u WALLETADDRESS -p x

20+ GPU's & rented hash:

Code:

 -a x16r -o stratum+tcp://192.168.1.10:3008 -u WALLETADDRESS -p x

See you there

mate , you forgot to change the port numbers of the second and third option , on site of your minepool the portnumbers are 3032 for option 2 and 3256 for option 3

[mys5droid]

mate , you forgot to change the port numbers of the second and third option , on site of your minepool the portnumbers are 3032 for option 2 and 3256 for option 3

I wasnt done   I'm jk

Edit: I should say I have seen Xovenia build this from the ground up with progress updates along the way! I could in no way do even half of his days work in a whole week You will love the project that comes out of this

Mine Pexa NOW so you can pay for a hosted mining pool deployed on Pexa later!

How to unstuck your pexa sync & run Pexa fullnode:

Feel free to link to this posting for anyone stuck sync   https://bitcointalk.org/index.php?topic=5168258.msg51945828#msg51945828

Windows:
- Open wallet, click tools, options, configuration file
- If does not work, open %APPDATA%/Pexa/pexa.conf in notepad
- Copy the lines at bottom into this file & save
- Open wallet again

Linux:
- nano ~/.pexa/pexa.conf
- Copy the lines at bottom into this file
- CTRL + X
- pexa-qt

Code:

gen=0
dns=1
listen=0            # change to 1 for full node and open port 8235
dnsseed=1
rpcuser=test        # change this
rpcpass=test        # change this
rpcport=2300
rcpallowip=127.0.0.1
addnode=us-west-1.pexaproject.com:8235
addnode=us-east-1.pexaproject.com:8235
addnode=pool.pexa.dev:8235
addnode=easyxpool.tk:2501
addnode=108.170.129.129:2510
addnode=nj1.easyxpool.tk:2500
addnode=nj2.easyxpool.tk:2501
addnode=nj3.easyxpool.tk:2502
addnode=134.209.233.95:46312
addnode=174.138.55.214:8235
addnode=24.79.70.68:61959
addnode=51.15.253.90:8235
addnode=71.38.101.98:60789
addnode=[2001:bc8:4400:2200::2123]:8235

Please run a full node to support network if you can... thanks

[NitroKoS2]

[Suspicious link removed]

0% fee for limited time! Rented hash welcome!

1-2 GPU's:

Code:

-a x16r -o stratum+tcp://192.168.1.10:3008 -u WALLETADDRESS -p x

3-15 GPU's:

Code:

 -a x16r -o stratum+tcp://192.168.1.10:3008 -u WALLETADDRESS -p x

20+ GPU's & rented hash:

Code:

 -a x16r -o stratum+tcp://192.168.1.10:3008 -u WALLETADDRESS -p x

See you there

mate , you forgot to change the port numbers of the second and third option , on site of your minepool the portnumbers are 3032 for option 2 and 3256 for option 3

He did worse than that, check out those IP addresses 

[CountCryptula]

POW and raven miners - this is definitely a coin you should check out

[onyabike]

how to view blocks mined/rewards for easypool? explorer looks broken otherwise im gonna stop mining from this crappy pool and mine from one that does

[zoneterror]

 

We added Pexacoin:

--->   MiningCoins.ca   <---

• 0.19% fee


• Payouts every 30 minutes for balance above 0.0001


• -a x16r -o stratum+tcp://miningcoins.ca:3636 -u <walletaddress> -p c=PEXA

--> DISCORD <--

Thank you

[mys5droid]

He did worse than that, check out those IP addresses  

Haha well it happens when you pull all nighters to run a pool.

I work hard to not only keep this online but actively develop the software while waiting for Pexa pool software.

Thank you both for pointing out the mistakes

how to view blocks mined/rewards for easypool? explorer looks broken otherwise im gonna stop mining from this crappy pool and mine from one that does

Currently it is not possible in NOMP to see blocks mined. Currently you can only see payments made on EasyXPool. Yiimp currently is only pool software with block explorer.

The pool is not crappy, it is actually being developed. You are recognising work in progress as a final product. It is not a final product.

The pool runs stable now, and will only get better as I work my ass off for the pool.

It isn't my fault you misunderstand and mistake a pool without a found block explorer (that is in development) as a "crappy pool".

At least the pool in development always has a developer/operator around to fix things as soon as they are issues, and add features requested by users instantly.

Just a tip, next time, join the pool or coin's Discord so you can ask things and sort this kind of stuff out. I have explained all of this in PEXA discord. I have talked about whether I should put found blocks above or below the payments, etc.

Had you joined the Discord you would have seen that.

You may mine wherever you like It all supports Pexa project

Oh and the explorers are not broken, I have been using them myself and so have many others who let me know in Discord when it is down.

[onyabike]

He did worse than that, check out those IP addresses  

Haha well it happens when you pull all nighters to run a pool.

I work hard to not only keep this online but actively develop the software while waiting for Pexa pool software.

Thank you both for pointing out the mistakes

how to view blocks mined/rewards for easypool? explorer looks broken otherwise im gonna stop mining from this crappy pool and mine from one that does

Currently it is not possible in NOMP to see blocks mined. Currently you can only see payments made on EasyXPool. Yiimp currently is only pool software with block explorer.

The pool is not crappy, it is actually being developed. You are recognising work in progress as a final product. It is not a final product.

The pool runs stable now, and will only get better as I work my ass off for the pool.

It isn't my fault you misunderstand and mistake a pool without a found block explorer (that is in development) as a "crappy pool".

At least the pool in development always has a developer/operator around to fix things as soon as they are issues, and add features requested by users instantly.

Just a tip, next time, join the pool or coin's Discord so you can ask things and sort this kind of stuff out. I have explained all of this in PEXA discord. I have talked about whether I should put found blocks above or below the payments, etc.

Had you joined the Discord you would have seen that.

You may mine wherever you like It all supports Pexa project

Oh and the explorers are not broken, I have been using them myself and so have many others who let me know in Discord when it is down.

alright fine I take my comment back claiming it to be a "crappy pool" got used to viewing easypool mined blocks figured the same use case for this pool

[lembang]

EASYXPOOL.TK

0% fee for limited time! Rented hash welcome!

1-2 GPU's:

Code:

-a x16r -o stratum+tcp://easyxpool.tk:3008 -u WALLETADDRESS -p x

3-15 GPU's:

Code:

 -a x16r -o stratum+tcp://easyxpool.tk:3032 -u WALLETADDRESS -p x

20+ GPU's & rented hash:

Code:

 -a x16r -o stratum+tcp://easyxpool.tk:3256 -u WALLETADDRESS -p x

See you there

I joined the pool and I only had speeds of around 4-6 mh / s and after 2 hours I still didn't get 1 coin, so how long did it take to get it? sorry I'm still a newbie in mining so I still don't understand it

[mys5droid]

I joined the pool and I only had speeds of around 4-6 mh / s and after 2 hours I still didn't get 1 coin, so how long did it take to get it? sorry I'm still a newbie in mining so I still don't understand it

Currently the pool is running @ 4GH/s and the difficulty is spiking https://imgur.com/zJePYzP.png

You probably have pending payments, under the 0.5 limit. It will be easier to tell once I get pending payments working, but I have others wanting the block explorer done...

You should receive a payment at some point, the pool is paying out all workers if you check the payments page.

If this is you : https://imgur.com/wAH7QXe.png

I believe you've now received payments if that is you I'll send you a little bonus

Here are some comparative workers and their payouts:
https://easyxpool.tk:4443/workers/XXCT2TJktMKx4Cya4qXwYUAQav6n3uk41B
https://easyxpool.tk:4443/workers/XWSuKvtnLvD7251QwNpehZhokyjJYaP81D

As far as how much, it is luck of the draw for who gets a block, and usually if you mine long enough in one place your payments even out - as long as the pool you mine is running properly.

Edit: Bonus payment to all my smaller miners: https://pexa.easyxpool.tk:451/tx/d3996d72101a5fe1acea03381925183df72f149c2deda08dab29f779c9917611

[Damian-Bradley69]

How will this compete with ethereum and the likes?

[mys5droid]

How will this compete with ethereum and the likes?

Don't believe it will, ETH and Pexa are two different beasts.... Pexa is a crypto for a pool software project. ETH is a smart contract platform.

ETH's project is ETH, it has ERC tokens on top of it.

Pexa's project is a mining pool software (there's more too, I just like the pool software) it doesnt have tokens on top of it... Although it does have "assets" which I guess are like tokens. It is an x16r fork so it has most main features of x16r parent, ravencoin

[voteformeg]

Edit: Bonus payment to all my smaller miners: https://pexa.easyxpool.tk:451/tx/d3996d72101a5fe1acea03381925183df72f149c2deda08dab29f779c9917611

i saw that i also recieved the bonus , didn;t know you are going to do that , alway's good to be in a good community , tanx

[shhenk]

HI
when listing on the stock exchange?

[edmoffo]

How many people are involved in your project? How many developers are there? What is the background to them?

[zoneterror]

 

We added Pexacoin

  MiningCoins.ca   

• 0.19% lowest fee on the market


• Payouts every 30 minutes for balance above 0.0001


• -a x16r -o stratum+tcp://miningcoins.ca:3636 -u <walletaddress> -p c=PEXA

--> DISCORD <--

Thank you

[ajaymukund]

The Pexa token is really a very good solution in the future but it's all a theory at the present time. We need to have a professional team and have a stable capital to run a stable project in the near future.
The direction is very good but we need capital and good marketers to help the project grow better.

[xovenia]

We've just built a custom blockchain explorer. https://explorer.pexaproject.com It's a tad bit buggy right now, address balances are incorrect. Also inputs and outputs didn't seem to index properly with the script I wrote. I'll be debugging and fixing this soon as time permits. The pool is underway and photos of a sneak peak are on discord in the announcements section! Enjoy.