[ANN]GenesisCoin|ASIC resistance|Profit calculator, chart, automatic update

[pttinh]

Hi all,

We've just started the second giveaway here.


2nd Giveaway: https://cryptocointalk.com/topic/8415-2nd-giveraway-1000-gns-for-each-people/

[xfear]

WE WILL DONATE 10 BIL GNS COIN FOR THE FIRST EXCHANGE ACCEPTS US, 5 MIL FOR THE SECOND AND 3 MIL FOR THE THIRD EXCHANGE.
====>>>VOTE FOR US TO BE LISTED IN COINEDUP HERE<<<====
====>>> VOTE FOR US TO BE LISTED IN CRYPTSY HERE <<<====
====>>> VOTE FOR US TO BE LISTED IN MINTPAL <<<====
====>>> VOTE FOR US TO BE LISTED IN POLONIEX<<<====

10 BIL for first ? are u sure ? xD, maybe u wanted to say 10MIL with M, not B

[erickarsfast]

gns.pool.mn downed again

its my first time that i see the pools getting down so frequently, this is bad for the coin, because the hashrate is going down too, and the volumen will be worse later for trading it, maybe some other pool administrators should make more publicity about their pools, so people get motivated to go there too

Try this one


-> Come on to http://gns.coins4everyone.com!

[pttinh]

WE WILL DONATE 10 BIL GNS COIN FOR THE FIRST EXCHANGE ACCEPTS US, 5 MIL FOR THE SECOND AND 3 MIL FOR THE THIRD EXCHANGE.
====>>>VOTE FOR US TO BE LISTED IN COINEDUP HERE<<<====
====>>> VOTE FOR US TO BE LISTED IN CRYPTSY HERE <<<====
====>>> VOTE FOR US TO BE LISTED IN MINTPAL <<<====
====>>> VOTE FOR US TO BE LISTED IN POLONIEX<<<====

10 BIL for first ? are u sure ? xD, maybe u wanted to say 10MIL with M, not B

My god, yes, 10 MIL

P/S: is there any one know how to contact with cryptorush.in? We cannot find any way to contact the owner

[aeonxul]

damn, i can not get more than 200-220 kh/s with vertminer 0.5.3 using my sapphire 7950 dual-x!
any configurations or tips would be much appreciated!
PS. what's the normal kh/s for 7950 with scrypt-n??

[pttinh]

damn, i can not get more than 200-220 kh/s with vertminer 0.5.3 using my sapphire 7950 dual-x!
any configurations or tips would be much appreciated!
PS. what's the normal kh/s for 7950 with scrypt-n??

R9 270 can get 220 Khs, so 7950 should be at least 250Khs.

[cycoinminer]

I have a couple of tri-x 290's which I'm struggling to get a decent output from.

If anyone can suggest how to increase these - they currently run at around 350kh/s each

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
-I 17 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-fan 95 --gpu-engine 900 --gpu-memclock 1350 --expiry 30 --scan-time 1 --gpu-powertune 20

[pttinh]

I have a couple of tri-x 290's which I'm struggling to get a decent output from.

If anyone can suggest how to increase these - they currently run at around 350kh/s each

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
-I 17 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-fan 95 --gpu-engine 900 --gpu-memclock 1350 --expiry 30 --scan-time 1 --gpu-powertune 20

Thanks, we will post your config in the first page to help others can easily get the high hash rate

[Matic]

I have a couple of tri-x 290's which I'm struggling to get a decent output from.

If anyone can suggest how to increase these - they currently run at around 350kh/s each

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
-I 17 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-fan 95 --gpu-engine 900 --gpu-memclock 1350 --expiry 30 --scan-time 1 --gpu-powertune 20

Thanks, we will post your config in the first page to help others can easily get the high hash rate

460kH/s

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "1000",
"gpu-fan" : "55",
"gpu-memclock" : "1373",
"gpu-powertune" : "30",
"gpu-reorder" : true,
"intensity" : "20",
"temp-target" : "70",
"temp-overheat" : "90",
"temp-cutoff" : "90",
"temp-hysteresis" : "3",
"vectors" : "2",
"worksize" : "512",
"lookup-gap" : "2",
"thread-concurrency" : "24550"

[pttinh]

I have a couple of tri-x 290's which I'm struggling to get a decent output from.

If anyone can suggest how to increase these - they currently run at around 350kh/s each

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
-I 17 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-fan 95 --gpu-engine 900 --gpu-memclock 1350 --expiry 30 --scan-time 1 --gpu-powertune 20

Thanks, we will post your config in the first page to help others can easily get the high hash rate

460kH/s

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "1000",
"gpu-fan" : "55",
"gpu-memclock" : "1373",
"gpu-powertune" : "30",
"gpu-reorder" : true,
"intensity" : "20",
"temp-target" : "70",
"temp-overheat" : "90",
"temp-cutoff" : "90",
"temp-hysteresis" : "3",
"vectors" : "2",
"worksize" : "512",
"lookup-gap" : "2",
"thread-concurrency" : "24550"

Wow, so high. You use Linux?

[Alpinist]

WTS 225k GSN for 0.225btc. pm me.

[Matic]

I have a couple of tri-x 290's which I'm struggling to get a decent output from.

If anyone can suggest how to increase these - they currently run at around 350kh/s each

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
-I 17 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 24550 --gpu-fan 95 --gpu-engine 900 --gpu-memclock 1350 --expiry 30 --scan-time 1 --gpu-powertune 20

Thanks, we will post your config in the first page to help others can easily get the high hash rate

460kH/s

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "1000",
"gpu-fan" : "55",
"gpu-memclock" : "1373",
"gpu-powertune" : "30",
"gpu-reorder" : true,
"intensity" : "20",
"temp-target" : "70",
"temp-overheat" : "90",
"temp-cutoff" : "90",
"temp-hysteresis" : "3",
"vectors" : "2",
"worksize" : "512",
"lookup-gap" : "2",
"thread-concurrency" : "24550"

Wow, so high. You use Linux?

Nope, Win 8.1 OS, works great, it took me 3 full days to get the config just right

[pttinh]

Hi all, we've received reply  from poloniex support team:

"Thank you very much!  I will add your coin to Tristan's watch list!  Warm Regards, Angela."

Hope that they will add GenesisCoin soon 

[pttinh]

Hi all,

Don't forget to get the second giveaway

2nd Giveaway: https://cryptocointalk.com/topic/8415-2nd-giveraway-1000-gns-for-each-people/

[bullus]

damn, i can not get more than 200-220 kh/s with vertminer 0.5.3 using my sapphire 7950 dual-x!
any configurations or tips would be much appreciated!
PS. what's the normal kh/s for 7950 with scrypt-n??

I can run 360kh/s @1080/1500

Code:

"intensity" : "13",
"vectors" : "1,1,1,1",
"worksize" : "256,256,256,256",
"kernel" : "scrypt",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "1792,1792,1792,1792",
"gpu-engine" : "0-0,0-0,0-0,0-0",
"gpu-fan" : "70-70",
"gpu-memclock" : "0,0,0,0",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "10",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "5",
"scrypt-vert" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",

tips are welcome
gmBW8mUq2M7sfaN1HFjKzRUTRzeYsKmHQU

[fengsui]

China, the total mining exchange QQ group 244547403--GNS中国区挖矿交流QQ总群244547403

[noodle_dam]

Trying to get a wallet on Mac, It says no block source available and won't sync though.

[pttinh]

Trying to get a wallet on Mac, It says no block source available and won't sync though.

Did you add all node at the first page?

[noodle_dam]

Trying to get a wallet on Mac, It says no block source available and won't sync though.

Did you add all node at the first page?

I don't know how to do that. All I have done is download the wallet.

[pttinh]

Trying to get a wallet on Mac, It says no block source available and won't sync though.

Did you add all node at the first page?

I don't know how to do that. All I have done is download the wallet.

You should download our conf file at the first page then put to your wallet folder (We don't know exactly where it is on MAC machine) and restart your wallet or you can open debug window and put command:

addnode xxx.xxx.xxx.xxx add

xxx is the IP of node in conf file.