gearshiftjb (OP)
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 04:49:37 AM |
|
I've tried troubleshooting all day today and am just curious if anyone can help me figure this out. 2500w PSU into 220v transformer into 110v ac wall on 20A; theoretically should have enough power. Do I need a warranty repair already? I literally just received it today directly from bitmain. I was getting Socket connect failed: Connection refused in the "overview - Hardware Version" line earlier but it has seemed to disappear. Below is the kernel log. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203696K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25680K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12640K (ccea9000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2109795351 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E693EB69-0338-4A01-A65D-9E767A4A307B, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1751317449 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2019-10-11 04:32:15.610] httpListenThread start ret=0 [2019-10-11 04:32:45.612] start listen on 6060 ... [2019-10-11 04:37:01.193] Probing for an alive pool [2019-10-11 04:37:01.194] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:37:01.194] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:37:01.195] initiate_stratum [2019-10-11 04:37:01.347] LOW POWER MODE! [2019-10-11 04:37:01.347] in stratum_sthread [2019-10-11 04:37:01.348] Pool 0 difficulty changed to 65536 [2019-10-11 04:37:01.349] Network diff set to 352G [2019-10-11 04:37:01.373] POOL 0 support ab mode! [2019-10-11 04:37:02.194] signal_work_update set work_update true [2019-10-11 04:37:02.196] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0) [2019-10-11 04:37:07.197] API running in IP access mode on port 4028 (9) [2019-10-11 04:37:07.939] Network diff set to 352G [2019-10-11 04:37:07.939] Stratum from pool 0 detected new block at height 604046 [2019-10-11 04:37:07.940] signal_work_update set work_update true [2019-10-11 04:37:31.195] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:37:31.195] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:38:01.195] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:38:01.195] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:38:31.196] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:38:31.196] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:38:37.579] Pool 0 difficulty changed to 32768 [2019-10-11 04:38:38.220] signal_work_update set work_update true [2019-10-11 04:39:01.196] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:39:01.197] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:39:31.197] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:39:31.197] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:40:01.198] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:40:01.198] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:40:07.071] Pool 0 difficulty changed to 16384 [2019-10-11 04:40:08.250] signal_work_update set work_update true [2019-10-11 04:40:31.198] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:40:31.198] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:40:52.150] Pool 0 difficulty changed to 8192 [2019-10-11 04:40:52.151] Network diff set to 338G [2019-10-11 04:40:52.151] Stratum from pool 0 detected new block at height 604047 [2019-10-11 04:40:52.152] signal_work_update set work_update true [2019-10-11 04:41:01.199] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:41:01.199] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:42:22.241] Stratum connection to pool 0 interrupted [2019-10-11 04:42:22.242] initiate_stratum [2019-10-11 04:42:22.347] LOW POWER MODE! [2019-10-11 04:42:22.347] Pool 0 difficulty changed to 65536 [2019-10-11 04:42:22.348] Stratum from pool 0 requested work restart [2019-10-11 04:42:22.353] signal_work_update set work_update true [2019-10-11 04:42:22.375] POOL 0 support ab mode! [2019-10-11 04:42:24.283] signal_work_update set work_update true [2019-10-11 04:42:31.201] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:43:31.202] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:43:52.682] Stratum connection to pool 0 interrupted [2019-10-11 04:43:52.682] initiate_stratum [2019-10-11 04:43:52.779] LOW POWER MODE! [2019-10-11 04:43:52.779] Pool 0 difficulty changed to 65536 [2019-10-11 04:43:52.780] Stratum from pool 0 requested work restart [2019-10-11 04:43:52.783] signal_work_update set work_update true [2019-10-11 04:43:52.807] POOL 0 support ab mode! [2019-10-11 04:44:01.203] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:45:01.204] No Stratum, GBT or Solo support in pool 1 unable to use [2019-10-11 04:45:22.808] Pool 0 difficulty changed to 32768 [2019-10-11 04:45:24.332] signal_work_update set work_update true [2019-10-11 04:45:31.204] No Stratum, GBT or Solo support in pool 2 unable to use [2019-10-11 04:46:31.206] No Stratum, GBT or Solo support in pool 1 unable to use 2019-10-11 04:32:15 driver-btm-soc.c:6298:bitmain_soc_init: This is Antminer S9k scan user version 2019-10-11 04:32:15 driver-btm-soc.c:6304:bitmain_soc_init: special mode: disabled 2019-10-11 04:32:15 driver-btm-soc.c:6311:bitmain_soc_init: This is high performance mode 2019-10-11 04:32:15 driver-btm-soc.c:6316:bitmain_soc_init: last commit version: 5914201 commit time: 2019-09-29 11:57:01 build: 2019-09-29 15:32:19 2019-10-11 04:32:15 driver-btm-soc.c:6337:bitmain_soc_init: Detect 256MB control board of XILINX 2019-10-11 04:32:15 driver-btm-soc.c:6340:bitmain_soc_init: Miner compile time: Sun Sep 29 15:25:10 CST 2019 type: Antminer S9k 2019-10-11 04:32:15 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7 2019-10-11 04:32:15 driver-btm-soc.c:861:check_chain: !! chain[0]is exist 2019-10-11 04:32:15 driver-btm-soc.c:861:check_chain: !! chain[1]is exist 2019-10-11 04:32:15 driver-btm-soc.c:861:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 79 12 00 00 80 ff ff ff 39 10 96 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 6d 12 00 00 80 ff ff ff 39 10 d7 3f 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 48 12 00 00 80 ff ff ff 39 10 c6 45
read chain[0] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 9.44 max_aging_voltage: 9.84 sweep_min_freq: 270M sweep_max_freq: 310M
sweep config for hpf mode: sweep_start_voltage: 9.90 max_aging_voltage: 10.30 sweep_min_freq: 355M sweep_max_freq: 385M 2019-10-11 04:32:27 driver-btm-soc.c:5757:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
chain 1 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
chain 2 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
2019-10-11 04:32:27 driver-btm-soc.c:6430:bitmain_soc_init: reset all... 2019-10-11 04:32:29 driver-btm-soc.c:6438:bitmain_soc_init: miner ID : 801264c675104814 2019-10-11 04:32:29 driver-btm-soc.c:6099:init_miner_version: FPGA Version = 0xB00D 2019-10-11 04:32:48 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2019-10-11 04:32:49 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2019-10-11 04:32:50 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2019-10-11 04:32:50 power.c:185:power_init: power init ... 2019-10-11 04:32:50 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[0] eeprom 2019-10-11 04:32:50 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90 2019-10-11 04:32:50 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[1] eeprom 2019-10-11 04:32:50 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90 2019-10-11 04:32:50 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[2] eeprom 2019-10-11 04:32:50 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.90 2019-10-11 04:32:50 driver-btm-soc.c:5547:update_highest_voltage: chain 0 hpf working voltage 9.90 2019-10-11 04:32:50 driver-btm-soc.c:5547:update_highest_voltage: chain 1 hpf working voltage 9.90 2019-10-11 04:32:50 driver-btm-soc.c:5547:update_highest_voltage: chain 2 hpf working voltage 9.90 2019-10-11 04:32:50 driver-btm-soc.c:5556:update_highest_voltage: open core at max voltage 10.20 2019-10-11 04:32:50 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ... 2019-10-11 04:32:50 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 04:32:50 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ... 2019-10-11 04:32:53 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 04:32:53 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ... 2019-10-11 04:32:54 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 04:32:54 driver-btm-soc.c:1259:get_ideal_hash_rate: get ideal hash rate 14000 2019-10-11 04:32:54 eeprom.c:675:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04729 GH/s
2019-10-11 04:32:54 eeprom.c:675:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04717 GH/s
2019-10-11 04:32:54 eeprom.c:675:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04680 GH/s
2019-10-11 04:32:54 driver-btm-soc.c:6481:bitmain_soc_init: fan_eft : 0 fan_pwm : 0 2019-10-11 04:32:54 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 0 2019-10-11 04:32:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 2019-10-11 04:33:26 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2019-10-11 04:33:28 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 0, find asic num = 60 2019-10-11 04:33:31 driver-btm-soc.c:4617:set_freq_by_chain: chain[0] set freq:100.00 2019-10-11 04:33:31 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 04:33:32 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 0 2019-10-11 04:33:32 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 04:33:32 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 04:33:32 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 04:33:32 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 04:33:32 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 04:33:32 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct! 2019-10-11 04:33:32 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate ! 2019-10-11 04:33:32 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 04:33:32 temperature.c:763:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -5 -4 0 0 0 0 2019-10-11 04:33:32 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 04:33:32 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 04:33:32 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-5, typeID=55 2019-10-11 04:33:33 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-5 2019-10-11 04:33:33 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-5 typeID=55 2019-10-11 04:33:33 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 04:33:33 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 04:33:33 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-4 2019-10-11 04:33:33 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 04:33:33 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 1 2019-10-11 04:33:34 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2019-10-11 04:34:05 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2019-10-11 04:34:07 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 1, find asic num = 60 2019-10-11 04:34:10 driver-btm-soc.c:4617:set_freq_by_chain: chain[1] set freq:100.00 2019-10-11 04:34:10 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 04:34:11 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 1 2019-10-11 04:34:11 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 04:34:11 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 04:34:11 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 04:34:11 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 04:34:11 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 04:34:11 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct! 2019-10-11 04:34:11 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate ! 2019-10-11 04:34:11 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 04:34:11 temperature.c:763:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2019-10-11 04:34:11 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 04:34:11 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 04:34:11 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55 2019-10-11 04:34:12 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4 2019-10-11 04:34:12 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55 2019-10-11 04:34:12 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 04:34:12 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 04:34:12 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4 2019-10-11 04:34:12 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 04:34:12 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 2 2019-10-11 04:34:13 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2019-10-11 04:34:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2019-10-11 04:34:46 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 2, find asic num = 60 2019-10-11 04:34:49 driver-btm-soc.c:4617:set_freq_by_chain: chain[2] set freq:100.00 2019-10-11 04:34:49 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 04:34:50 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 2 2019-10-11 04:34:50 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 04:34:50 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 04:34:50 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 04:34:50 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 04:34:50 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 04:34:50 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[2] temp sensor info, correct! 2019-10-11 04:34:50 temperature.c:748:check_eeprom_calibration_data: chain[2] no need to calibrate ! 2019-10-11 04:34:50 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 04:34:50 temperature.c:763:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2019-10-11 04:34:50 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 04:34:50 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 04:34:50 temperature.c:818:calibration_sensor_offset: Chain[2] chip[31] use PIC middle temp offset=-4, typeID=55 2019-10-11 04:34:51 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[31] local:0 remote:0 offset:-4 2019-10-11 04:34:51 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[31] get middle temp offset=-4 typeID=55 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 04:34:51 temperature.c:818:calibration_sensor_offset: Chain[2] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 04:34:51 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[40] local:0 remote:0 offset:-4 2019-10-11 04:34:51 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 04:34:51 asic.c:1153:set_baud: set baud=1 2019-10-11 04:34:51 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 04:34:51 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 04:34:51 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 04:34:51 asic.c:1164:set_baud: read bc write is 0x82001a 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 04:34:51 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 04:34:51 driver-btm-soc.c:6496:bitmain_soc_init: set TICKET_MASK 2019-10-11 04:34:53 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [23] 2019-10-11 04:34:53 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ... 2019-10-11 04:35:04 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [23] 2019-10-11 04:35:04 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ... 2019-10-11 04:35:15 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [23] 2019-10-11 04:35:15 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ... 2019-10-11 04:35:25 driver-btm-soc.c:3871:set_clock_delay_control: set mode 0 2019-10-11 04:35:25 driver-btm-soc.c:3890:set_clock_delay_control: core_data = 0x04 2019-10-11 04:35:25 driver-btm-soc.c:3961:open_core_bm1393: Start Open Core!! 2019-10-11 04:35:31 driver-btm-soc.c:4028:open_core_bm1393: End Open Core!! 2019-10-11 04:35:32 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 125 2019-10-11 04:35:34 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 150 2019-10-11 04:35:36 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 175 2019-10-11 04:35:38 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 200 2019-10-11 04:35:41 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 225 2019-10-11 04:35:43 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 250 2019-10-11 04:35:45 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 275 2019-10-11 04:35:47 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 300 2019-10-11 04:35:49 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 325 2019-10-11 04:35:51 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 350 2019-10-11 04:35:53 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 375 2019-10-11 04:35:55 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 385 2019-10-11 04:35:57 driver-btm-soc.c:5196:increase_freq_by_eeprom_slowly: max = 385 ,min = 385 2019-10-11 04:35:57 driver-btm-soc.c:5202:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ... 2019-10-11 04:35:57 driver-btm-soc.c:5230:increase_freq_by_eeprom_slowly: chain 0 final freq setting: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 2019-10-11 04:35:57 driver-btm-soc.c:5242:increase_freq_by_eeprom_slowly: set chain 0 to working voltage 2019-10-11 04:35:57 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[10.20]-data[026] now setting chain[0]-volt[10.17]-data[027] now setting chain[0]-volt[10.14]-data[028] now setting chain[0]-volt[10.11]-data[029] now setting chain[0]-volt[10.08]-data[030] 2019-10-11 04:36:17 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try! now setting chain[0]-volt[10.02]-data[032] now setting chain[0]-volt[09.97]-data[034] now setting chain[0]-volt[09.95]-data[035] now setting chain[0]-volt[09.92]-data[036] 2019-10-11 04:36:34 power.c:1331:slowly_set_working_power_t11: done! 2019-10-11 04:36:34 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 125 2019-10-11 04:36:37 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 150 2019-10-11 04:36:39 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 175 2019-10-11 04:36:41 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 200 2019-10-11 04:36:43 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 225 2019-10-11 04:36:45 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 250 2019-10-11 04:36:47 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 275 2019-10-11 04:36:49 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 300 2019-10-11 04:36:51 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 325 2019-10-11 04:36:54 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 350 2019-10-11 04:36:56 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 375 2019-10-11 04:36:58 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 385 2019-10-11 04:36:59 temperature.c:2117:is_temperature_too_high: Warning: temperature is too high 2019-10-11 04:36:59 temperature.c:1195:disable_hash_board: disable_pic_dac as status_value 3 2019-10-11 04:37:00 driver-btm-soc.c:4247:get_nonce_and_register: !!! REG_TYPE = 1 2019-10-11 04:37:01 driver-btm-soc.c:7241:bitmain_soc_prepare: bitmain soc init failed. 2019-10-11 04:37:01 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:37:01 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:37:02 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 04:42:22 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 04:42:22 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:42:22 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:42:24 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 04:43:52 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 04:43:52 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:43:52 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:45:24 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 04:48:22 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 04:48:22 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:48:22 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:49:54 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 04:52:52 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 04:52:52 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:52:52 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:52:54 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 04:54:23 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 04:54:23 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:54:23 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:54:24 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 04:55:53 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 04:55:53 util.c:2178:process_version_mask: Pool 0 Version num is 2 2019-10-11 04:55:53 util.c:2178:process_version_mask: Pool 0 Version num is 2
|
|
|
|
Philipma1957cellphone
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 02:24:40 PM Last edit: October 12, 2019, 03:27:22 AM by frodocooper |
|
okay do this only power one board not all three. And make sure you filled in three pools not one or two pools.
|
This is philipma1957 alt. Do not conduct business with this account
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3682
Merit: 2609
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 02:35:43 PM Last edit: October 11, 2019, 03:07:01 PM by NotFuzzyWarm |
|
I was getting Socket connect failed: Connection refused in the "overview - Hardware Version" line earlier but it has seemed to disappear.
The miner needs time to do its auto-tuning, that can be anywhere from several minutes and by some reports up to an hour. During tuning you get the "Connection refused" message and it goes away when tuning is done. How long are you waiting? Any whitespace at the end of your pool and/or user info? If so delete the space because it makes those entries invalid.
|
|
|
|
gearshiftjb (OP)
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 03:22:17 PM Last edit: October 12, 2019, 03:28:06 AM by frodocooper |
|
okay do this only power one board not all three. And make sure you filled in three pools not one or two pools.
i only had 1-2 pools so i went ahead and added a third; I'm going to reboot and wait 1-2 hours and check back. (trying first with 3 boards) The miner needs time to do its auto-tuning, that can be anywhere from several minutes and by some reports up to an hour. During tuning you get the "Connection refused" message and it goes away when tuning is done.
How long are you waiting? Any whitespace at the end of your pool and/or user info? If so delete the space because it makes those entries invalid.
Usually I'll wait an hour. I filled in the third pools info because I only had two and will touch back in an hour or two with results.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4172
Merit: 8117
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 04:50:41 PM Last edit: October 12, 2019, 03:28:23 AM by frodocooper |
|
Some of the firmwares and there are a lot of them are very picky about how you do the three pools.
|
|
|
|
gearshiftjb (OP)
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 06:07:24 PM |
|
After just under 3 hours of runtime this is my kernel. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203696K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25680K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12640K (ccea9000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2109795351 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E693EB69-0338-4A01-A65D-9E767A4A307B, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1751317449 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2019-10-11 15:20:42.901] httpListenThread start ret=0 [2019-10-11 15:21:12.901] start listen on 6060 ... [2019-10-11 15:25:26.364] Probing for an alive pool [2019-10-11 15:25:26.365] initiate_stratum [2019-10-11 15:25:26.365] initiate_stratum [2019-10-11 15:25:26.366] initiate_stratum [2019-10-11 15:25:26.490] LOW POWER MODE! [2019-10-11 15:25:26.490] Switching to pool 2 stratum+tcp://us.ss.btc.com:1800 - first alive pool [2019-10-11 15:25:26.491] in stratum_sthread [2019-10-11 15:25:26.491] Pool 2 difficulty changed to 65536 [2019-10-11 15:25:26.492] Network diff set to 334G [2019-10-11 15:25:26.513] LOW POWER MODE! [2019-10-11 15:25:26.513] Pool 1 stratum+tcp://us-bch.ss.btc.com:1800 alive, testing stability [2019-10-11 15:25:26.514] in stratum_sthread [2019-10-11 15:25:26.514] Pool 1 difficulty changed to 65536 [2019-10-11 15:25:26.517] POOL 2 support ab mode! [2019-10-11 15:25:26.538] POOL 1 support ab mode! [2019-10-11 15:25:26.899] LOW POWER MODE! [2019-10-11 15:25:26.899] Pool 0 stratum+tcp://sha256.usa.nicehash.com:3334 alive, testing stability [2019-10-11 15:25:26.900] Switching to pool 1 stratum+tcp://us-bch.ss.btc.com:1800 [2019-10-11 15:25:26.900] in stratum_sthread [2019-10-11 15:25:26.901] Pool 0 difficulty changed to 1000000 [2019-10-11 15:25:27.365] signal_work_update set work_update true [2019-10-11 15:25:27.367] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0) [2019-10-11 15:25:27.367] Pool 0 stratum+tcp://sha256.usa.nicehash.com:3334 stable for >120 seconds [2019-10-11 15:25:27.367] Switching to pool 0 stratum+tcp://sha256.usa.nicehash.com:3334 [2019-10-11 15:25:32.367] API running in IP access mode on port 4028 (11) [2019-10-11 15:25:35.369] signal_work_update set work_update true [2019-10-11 15:26:05.378] signal_work_update set work_update true [2019-10-11 15:26:07.469] Pool 0 extranonce change requested [2019-10-11 15:26:07.471] Pool 0 difficulty changed to 524288 [2019-10-11 15:26:07.479] Network diff set to 13T [2019-10-11 15:26:07.479] Stratum from pool 0 detected new block at height 598936 [2019-10-11 15:26:07.480] signal_work_update set work_update true [2019-10-11 15:26:28.164] Pool 1 difficulty changed to 32768 [2019-10-11 15:26:59.393] signal_work_update set work_update true [2019-10-11 15:27:26.742] Pool 0 difficulty changed to 500000 [2019-10-11 15:28:14.563] Stratum from pool 0 detected new block at height 598937 [2019-10-11 15:28:14.564] signal_work_update set work_update true [2019-10-11 15:28:15.426] signal_work_update set work_update true [2019-10-11 15:28:17.427] signal_work_update set work_update true [2019-10-11 15:28:25.430] signal_work_update set work_update true [2019-10-11 15:29:24.193] Stratum from pool 0 detected new block at height 598938 [2019-10-11 15:29:24.194] signal_work_update set work_update true [2019-10-11 15:29:25.447] signal_work_update set work_update true [2019-10-11 15:29:39.451] signal_work_update set work_update true [2019-10-11 15:30:07.459] signal_work_update set work_update true [2019-10-11 15:31:37.485] signal_work_update set work_update true [2019-10-11 15:33:07.511] signal_work_update set work_update true [2019-10-11 15:34:36.444] Stratum connection to pool 0 interrupted [2019-10-11 15:34:36.445] initiate_stratum [2019-10-11 15:34:36.885] LOW POWER MODE! [2019-10-11 15:34:36.887] Pool 0 difficulty changed to 1000000 [2019-10-11 15:34:36.888] Stratum from pool 0 requested work restart [2019-10-11 15:34:36.891] signal_work_update set work_update true [2019-10-11 15:35:07.552] signal_work_update set work_update true [2019-10-11 15:35:08.653] Pool 0 extranonce change requested [2019-10-11 15:35:08.656] Network diff set to 37.2M [2019-10-11 15:35:08.656] Stratum from pool 0 detected new block at height 648268 [2019-10-11 15:35:08.657] signal_work_update set work_update true [2019-10-11 15:35:26.451] Stratum from pool 0 detected new block at height 648269 [2019-10-11 15:35:26.452] signal_work_update set work_update true [2019-10-11 15:35:47.915] Stratum from pool 0 detected new block at height 648270 [2019-10-11 15:35:47.916] signal_work_update set work_update true [2019-10-11 15:36:07.381] Stratum from pool 0 detected new block at height 648271 [2019-10-11 15:36:07.382] signal_work_update set work_update true [2019-10-11 15:36:10.113] Stratum from pool 0 detected new block at height 648272 [2019-10-11 15:36:10.113] signal_work_update set work_update true [2019-10-11 15:36:36.717] Pool 0 difficulty changed to 500000 [2019-10-11 15:37:05.576] signal_work_update set work_update true [2019-10-11 15:37:30.364] Stratum from pool 0 detected new block at height 648273 [2019-10-11 15:37:30.365] signal_work_update set work_update true [2019-10-11 15:38:12.132] Stratum from pool 0 detected new block at height 648274 [2019-10-11 15:38:12.133] signal_work_update set work_update true [2019-10-11 15:39:02.203] Stratum from pool 0 detected new block at height 648275 [2019-10-11 15:39:02.204] signal_work_update set work_update true [2019-10-11 15:39:04.579] Stratum from pool 0 detected new block at height 648276 [2019-10-11 15:39:04.580] signal_work_update set work_update true [2019-10-11 15:39:32.726] Pool 0 extranonce change requested [2019-10-11 15:39:32.729] Network diff set to 13T [2019-10-11 15:39:32.730] Stratum from pool 0 detected new block at height 598938 [2019-10-11 15:39:32.730] signal_work_update set work_update true [2019-10-11 15:40:05.216] Stratum from pool 0 detected new block at height 598939 [2019-10-11 15:40:05.217] signal_work_update set work_update true [2019-10-11 15:40:07.626] signal_work_update set work_update true [2019-10-11 15:40:09.627] signal_work_update set work_update true [2019-10-11 15:40:19.630] signal_work_update set work_update true [2019-10-11 15:41:47.655] signal_work_update set work_update true [2019-10-11 15:43:09.489] Stratum from pool 0 detected new block at height 598940 [2019-10-11 15:43:09.490] signal_work_update set work_update true [2019-10-11 15:43:09.679] signal_work_update set work_update true [2019-10-11 15:44:39.584] Stratum connection to pool 0 interrupted [2019-10-11 15:44:39.585] initiate_stratum [2019-10-11 15:44:40.013] LOW POWER MODE! [2019-10-11 15:44:40.014] Pool 0 difficulty changed to 1000000 [2019-10-11 15:44:40.084] Network diff set to 334G [2019-10-11 15:44:40.084] Stratum from pool 0 detected new block at height 604108 [2019-10-11 15:44:40.087] signal_work_update set work_update true [2019-10-11 15:45:11.717] signal_work_update set work_update true [2019-10-11 15:45:26.874] Pool 0 extranonce change requested [2019-10-11 15:45:26.876] Network diff set to 126G [2019-10-11 15:45:26.876] Stratum from pool 0 detected new block at height 603860 [2019-10-11 15:45:26.877] signal_work_update set work_update true [2019-10-11 15:45:49.662] Stratum from pool 0 requested work restart [2019-10-11 15:45:49.662] signal_work_update set work_update true [2019-10-11 15:51:01.070] signal_work_update set work_update true [2019-10-11 15:51:23.119] Stratum from pool 0 requested work restart [2019-10-11 15:51:23.120] signal_work_update set work_update true [2019-10-11 15:51:45.153] Stratum from pool 0 requested work restart [2019-10-11 15:51:45.154] signal_work_update set work_update true [2019-10-11 15:52:07.013] Stratum from pool 0 requested work restart [2019-10-11 15:52:07.014] signal_work_update set work_update true [2019-10-11 15:52:29.017] Stratum from pool 0 requested work restart [2019-10-11 15:52:29.018] signal_work_update set work_update true [2019-10-11 15:52:50.996] Stratum from pool 0 requested work restart [2019-10-11 15:52:50.996] signal_work_update set work_update true [2019-10-11 15:53:12.941] Stratum from pool 0 requested work restart [2019-10-11 15:53:12.942] signal_work_update set work_update true [2019-10-11 15:53:34.831] Stratum from pool 0 requested work restart [2019-10-11 15:53:34.832] signal_work_update set work_update true [2019-10-11 15:53:56.656] Stratum from pool 0 requested work restart [2019-10-11 15:53:56.657] signal_work_update set work_update true [2019-10-11 15:54:18.572] Stratum from pool 0 requested work restart [2019-10-11 15:54:18.573] signal_work_update set work_update true [2019-10-11 15:54:40.452] Stratum from pool 0 requested work restart [2019-10-11 15:54:40.452] signal_work_update set work_update true [2019-10-11 15:55:02.363] Stratum from pool 0 requested work restart [2019-10-11 15:55:02.364] signal_work_update set work_update true [2019-10-11 15:55:24.103] Stratum from pool 0 requested work restart [2019-10-11 15:55:24.104] signal_work_update set work_update true [2019-10-11 15:56:11.366] Stratum reconnect requested from pool 0 to sha256.usa.nicehash.com:3334 [2019-10-11 15:56:11.367] initiate_stratum [2019-10-11 15:56:12.548] LOW POWER MODE! [2019-10-11 15:56:12.548] Pool 0 difficulty changed to 1000000 [2019-10-11 15:56:12.549] Stratum from pool 0 requested work restart [2019-10-11 15:56:12.554] signal_work_update set work_update true [2019-10-11 15:56:32.113] Stratum from pool 0 requested work restart [2019-10-11 15:56:32.114] signal_work_update set work_update true [2019-10-11 15:56:53.894] Stratum from pool 0 requested work restart [2019-10-11 15:56:53.894] signal_work_update set work_update true [2019-10-11 15:57:15.941] Stratum from pool 0 requested work restart [2019-10-11 15:57:15.942] signal_work_update set work_update true [2019-10-11 15:57:39.160] Stratum from pool 0 requested work restart [2019-10-11 15:57:39.161] signal_work_update set work_update true [2019-10-11 15:58:00.861] Stratum from pool 0 requested work restart [2019-10-11 15:58:00.862] signal_work_update set work_update true [2019-10-11 15:58:12.409] Pool 0 difficulty changed to 500000 [2019-10-11 15:58:23.388] Stratum from pool 0 requested work restart [2019-10-11 15:58:23.389] signal_work_update set work_update true [2019-10-11 15:58:46.089] Stratum from pool 0 requested work restart [2019-10-11 15:58:46.090] signal_work_update set work_update true [2019-10-11 15:59:08.465] Stratum from pool 0 requested work restart [2019-10-11 15:59:08.466] signal_work_update set work_update true [2019-10-11 15:59:30.532] Stratum from pool 0 requested work restart [2019-10-11 15:59:30.532] signal_work_update set work_update true [2019-10-11 15:59:52.489] Stratum from pool 0 requested work restart [2019-10-11 15:59:52.489] signal_work_update set work_update true [2019-10-11 16:00:14.465] Stratum from pool 0 requested work restart [2019-10-11 16:00:14.465] signal_work_update set work_update true [2019-10-11 16:00:36.632] Stratum from pool 0 requested work restart [2019-10-11 16:00:36.632] signal_work_update set work_update true [2019-10-11 16:00:58.418] Stratum from pool 0 requested work restart [2019-10-11 16:00:58.419] signal_work_update set work_update true [2019-10-11 16:01:20.543] Stratum from pool 0 requested work restart [2019-10-11 16:01:20.544] signal_work_update set work_update true [2019-10-11 16:01:42.515] Stratum from pool 0 requested work restart [2019-10-11 16:01:42.516] signal_work_update set work_update true [2019-10-11 16:01:49.020] Network diff set to 125G [2019-10-11 16:01:49.020] Stratum from pool 0 detected new block at height 603861 [2019-10-11 16:01:49.021] signal_work_update set work_update true [2019-10-11 16:02:04.424] Stratum from pool 0 requested work restart [2019-10-11 16:04:17.195] signal_work_update set work_update true [2019-10-11 16:04:40.262] Stratum from pool 0 requested work restart [2019-10-11 16:04:40.263] signal_work_update set work_update true [2019-10-11 16:05:04.977] Stratum from pool 0 requested work restart [2019-10-11 16:05:04.977] signal_work_update set work_update true [2019-10-11 16:05:28.548] Stratum from pool 0 requested work restart [2019-10-11 16:05:28.549] signal_work_update set work_update true [2019-10-11 16:05:50.959] Stratum from pool 0 requested work restart [2019-10-11 16:05:50.960] signal_work_update set work_update true [2019-10-11 16:06:46.159] Stratum reconnect requested from pool 0 to sha256.usa.nicehash.com:3334 [2019-10-11 16:06:46.160] initiate_stratum [2019-10-11 16:06:46.555] LOW POWER MODE! [2019-10-11 16:06:46.556] Pool 0 difficulty changed to 1000000 [2019-10-11 16:06:46.557] Stratum from pool 0 requested work restart [2019-10-11 16:06:46.558] signal_work_update set work_update true [2019-10-11 16:06:59.626] Stratum from pool 0 requested work restart [2019-10-11 16:06:59.627] signal_work_update set work_update true [2019-10-11 16:07:22.766] Stratum from pool 0 requested work restart [2019-10-11 16:07:22.767] signal_work_update set work_update true [2019-10-11 16:07:46.018] Stratum from pool 0 requested work restart [2019-10-11 16:07:46.019] signal_work_update set work_update true [2019-10-11 16:08:08.142] Stratum from pool 0 requested work restart [2019-10-11 16:08:08.143] signal_work_update set work_update true [2019-10-11 16:08:31.376] Stratum from pool 0 requested work restart [2019-10-11 16:08:31.377] signal_work_update set work_update true [2019-10-11 16:08:46.405] Pool 0 difficulty changed to 500000 [2019-10-11 16:08:53.354] Stratum from pool 0 requested work restart [2019-10-11 16:08:53.354] signal_work_update set work_update true [2019-10-11 16:09:15.538] Stratum from pool 0 requested work restart [2019-10-11 16:09:15.539] signal_work_update set work_update true [2019-10-11 16:09:30.170] Network diff set to 123G [2019-10-11 16:09:30.170] Stratum from pool 0 detected new block at height 603862 [2019-10-11 16:09:30.171] signal_work_update set work_update true [2019-10-11 16:09:37.492] Stratum from pool 0 requested work restart [2019-10-11 16:09:37.493] signal_work_update set work_update true [2019-10-11 16:09:59.389] Stratum from pool 0 requested work restart [2019-10-11 16:09:59.390] signal_work_update set work_update true [2019-10-11 16:10:21.448] Stratum from pool 0 requested work restart [2019-10-11 17:58:47.525] Stratum reconnect requested from pool 0 to sha256.usa.nicehash.com:3334 [2019-10-11 17:58:47.526] initiate_stratum [2019-10-11 17:58:47.887] LOW POWER MODE! [2019-10-11 17:58:47.887] Pool 0 difficulty changed to 1000000 [2019-10-11 17:58:47.888] Stratum from pool 0 requested work restart [2019-10-11 17:58:47.889] signal_work_update set work_update true [2019-10-11 17:58:53.932] Stratum from pool 0 requested work restart [2019-10-11 17:58:53.933] signal_work_update set work_update true [2019-10-11 17:59:15.006] Stratum from pool 0 requested work restart [2019-10-11 17:59:15.006] signal_work_update set work_update true [2019-10-11 17:59:36.122] Stratum from pool 0 requested work restart [2019-10-11 17:59:36.123] signal_work_update set work_update true [2019-10-11 17:59:57.519] Stratum from pool 0 requested work restart [2019-10-11 17:59:57.520] signal_work_update set work_update true [2019-10-11 18:00:18.534] Stratum from pool 0 requested work restart [2019-10-11 18:00:18.536] signal_work_update set work_update true [2019-10-11 18:00:39.480] Stratum from pool 0 requested work restart [2019-10-11 18:00:39.481] signal_work_update set work_update true [2019-10-11 18:00:47.748] Pool 0 difficulty changed to 500000 [2019-10-11 18:01:00.583] Stratum from pool 0 requested work restart [2019-10-11 18:01:00.584] signal_work_update set work_update true [2019-10-11 18:01:21.825] Stratum from pool 0 requested work restart [2019-10-11 18:01:21.826] signal_work_update set work_update true [2019-10-11 18:01:42.818] Stratum from pool 0 requested work restart [2019-10-11 18:01:42.819] signal_work_update set work_update true [2019-10-11 18:02:04.050] Stratum from pool 0 requested work restart [2019-10-11 18:02:04.051] signal_work_update set work_update true [2019-10-11 18:02:25.109] Stratum from pool 0 requested work restart [2019-10-11 18:02:25.110] signal_work_update set work_update true [2019-10-11 18:02:46.331] Stratum from pool 0 requested work restart [2019-10-11 18:02:46.332] signal_work_update set work_update true [2019-10-11 18:03:07.567] Stratum from pool 0 requested work restart [2019-10-11 18:03:07.568] signal_work_update set work_update true [2019-10-11 18:03:28.448] Stratum from pool 0 requested work restart [2019-10-11 18:03:28.449] signal_work_update set work_update true [2019-10-11 18:03:49.546] Stratum from pool 0 requested work restart [2019-10-11 18:03:49.547] signal_work_update set work_update true 2019-10-11 15:20:42 driver-btm-soc.c:6298:bitmain_soc_init: This is Antminer S9k scan user version 2019-10-11 15:20:42 driver-btm-soc.c:6304:bitmain_soc_init: special mode: disabled 2019-10-11 15:20:42 driver-btm-soc.c:6311:bitmain_soc_init: This is high performance mode 2019-10-11 15:20:42 driver-btm-soc.c:6316:bitmain_soc_init: last commit version: 5914201 commit time: 2019-09-29 11:57:01 build: 2019-09-29 15:32:19 2019-10-11 15:20:42 driver-btm-soc.c:6337:bitmain_soc_init: Detect 256MB control board of XILINX 2019-10-11 15:20:42 driver-btm-soc.c:6340:bitmain_soc_init: Miner compile time: Sun Sep 29 15:25:10 CST 2019 type: Antminer S9k 2019-10-11 15:20:42 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7 2019-10-11 15:20:42 driver-btm-soc.c:861:check_chain: !! chain[0]is exist 2019-10-11 15:20:42 driver-btm-soc.c:861:check_chain: !! chain[1]is exist 2019-10-11 15:20:42 driver-btm-soc.c:861:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 79 12 00 00 80 ff ff ff 39 10 96 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 6d 12 00 00 80 ff ff ff 39 10 d7 3f 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 48 12 00 00 80 ff ff ff 39 10 c6 45
read chain[0] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 9.44 max_aging_voltage: 9.84 sweep_min_freq: 270M sweep_max_freq: 310M
sweep config for hpf mode: sweep_start_voltage: 9.90 max_aging_voltage: 10.30 sweep_min_freq: 355M sweep_max_freq: 385M 2019-10-11 15:20:54 driver-btm-soc.c:5757:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
chain 1 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
chain 2 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
2019-10-11 15:20:54 driver-btm-soc.c:6430:bitmain_soc_init: reset all... 2019-10-11 15:20:56 driver-btm-soc.c:6438:bitmain_soc_init: miner ID : 801264c675104814 2019-10-11 15:20:56 driver-btm-soc.c:6099:init_miner_version: FPGA Version = 0xB00D 2019-10-11 15:21:16 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2019-10-11 15:21:16 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2019-10-11 15:21:17 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2019-10-11 15:21:17 power.c:185:power_init: power init ... 2019-10-11 15:21:17 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[0] eeprom 2019-10-11 15:21:17 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90 2019-10-11 15:21:17 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[1] eeprom 2019-10-11 15:21:17 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90 2019-10-11 15:21:17 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[2] eeprom 2019-10-11 15:21:17 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.90 2019-10-11 15:21:17 driver-btm-soc.c:5547:update_highest_voltage: chain 0 hpf working voltage 9.90 2019-10-11 15:21:17 driver-btm-soc.c:5547:update_highest_voltage: chain 1 hpf working voltage 9.90 2019-10-11 15:21:17 driver-btm-soc.c:5547:update_highest_voltage: chain 2 hpf working voltage 9.90 2019-10-11 15:21:17 driver-btm-soc.c:5556:update_highest_voltage: open core at max voltage 10.20 2019-10-11 15:21:17 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ... 2019-10-11 15:21:17 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 15:21:18 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ... 2019-10-11 15:21:20 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 15:21:20 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ... 2019-10-11 15:21:21 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 15:21:21 driver-btm-soc.c:1259:get_ideal_hash_rate: get ideal hash rate 14000 2019-10-11 15:21:21 eeprom.c:675:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04729 GH/s
2019-10-11 15:21:21 eeprom.c:675:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04717 GH/s
2019-10-11 15:21:21 eeprom.c:675:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04680 GH/s
2019-10-11 15:21:21 driver-btm-soc.c:6481:bitmain_soc_init: fan_eft : 0 fan_pwm : 0 2019-10-11 15:21:21 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 0 2019-10-11 15:21:22 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 2019-10-11 15:21:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2019-10-11 15:21:55 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 0, find asic num = 60 2019-10-11 15:21:59 driver-btm-soc.c:4617:set_freq_by_chain: chain[0] set freq:100.00 2019-10-11 15:21:59 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 15:21:59 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 0 2019-10-11 15:21:59 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 15:21:59 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 15:21:59 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 15:21:59 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 15:21:59 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 15:21:59 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct! 2019-10-11 15:21:59 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate ! 2019-10-11 15:21:59 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 15:21:59 temperature.c:763:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -5 -4 0 0 0 0 2019-10-11 15:21:59 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 15:21:59 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 15:22:00 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-5, typeID=55 2019-10-11 15:22:00 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-5 2019-10-11 15:22:00 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-5 typeID=55 2019-10-11 15:22:00 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 15:22:00 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 15:22:01 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-4 2019-10-11 15:22:01 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 15:22:01 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 1 2019-10-11 15:22:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2019-10-11 15:22:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2019-10-11 15:22:34 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 1, find asic num = 60 2019-10-11 15:22:38 driver-btm-soc.c:4617:set_freq_by_chain: chain[1] set freq:100.00 2019-10-11 15:22:38 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 15:22:38 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 1 2019-10-11 15:22:38 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 15:22:38 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 15:22:38 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 15:22:38 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 15:22:38 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 15:22:38 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct! 2019-10-11 15:22:38 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate ! 2019-10-11 15:22:38 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 15:22:38 temperature.c:763:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2019-10-11 15:22:38 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 15:22:38 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 15:22:39 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55 2019-10-11 15:22:39 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4 2019-10-11 15:22:39 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55 2019-10-11 15:22:39 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 15:22:39 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 15:22:40 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4 2019-10-11 15:22:40 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 15:22:40 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 2 2019-10-11 15:22:40 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2019-10-11 15:23:12 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2019-10-11 15:23:13 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 2, find asic num = 60 2019-10-11 15:23:17 driver-btm-soc.c:4617:set_freq_by_chain: chain[2] set freq:100.00 2019-10-11 15:23:17 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 15:23:17 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 2 2019-10-11 15:23:17 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 15:23:17 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 15:23:17 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 15:23:17 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 15:23:17 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 15:23:18 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[2] temp sensor info, correct! 2019-10-11 15:23:18 temperature.c:748:check_eeprom_calibration_data: chain[2] no need to calibrate ! 2019-10-11 15:23:18 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 15:23:18 temperature.c:763:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2019-10-11 15:23:18 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 15:23:18 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 15:23:18 temperature.c:818:calibration_sensor_offset: Chain[2] chip[31] use PIC middle temp offset=-4, typeID=55 2019-10-11 15:23:18 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[31] local:0 remote:0 offset:-4 2019-10-11 15:23:18 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[31] get middle temp offset=-4 typeID=55 2019-10-11 15:23:18 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 15:23:18 temperature.c:818:calibration_sensor_offset: Chain[2] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 15:23:19 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[40] local:0 remote:0 offset:-4 2019-10-11 15:23:19 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 15:23:19 asic.c:1153:set_baud: set baud=1 2019-10-11 15:23:19 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 15:23:19 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 15:23:19 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 15:23:19 asic.c:1164:set_baud: read bc write is 0x82001a 2019-10-11 15:23:19 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 15:23:19 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 15:23:19 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 15:23:19 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 15:23:19 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 15:23:19 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 15:23:19 driver-btm-soc.c:6496:bitmain_soc_init: set TICKET_MASK 2019-10-11 15:23:20 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [24] 2019-10-11 15:23:20 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ... 2019-10-11 15:23:31 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [24] 2019-10-11 15:23:31 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ... 2019-10-11 15:23:42 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [24] 2019-10-11 15:23:42 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ... 2019-10-11 15:23:52 driver-btm-soc.c:3871:set_clock_delay_control: set mode 0 2019-10-11 15:23:52 driver-btm-soc.c:3890:set_clock_delay_control: core_data = 0x04 2019-10-11 15:23:52 driver-btm-soc.c:3961:open_core_bm1393: Start Open Core!! 2019-10-11 15:23:58 driver-btm-soc.c:4028:open_core_bm1393: End Open Core!! 2019-10-11 15:23:59 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 125 2019-10-11 15:24:01 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 150 2019-10-11 15:24:04 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 175 2019-10-11 15:24:06 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 200 2019-10-11 15:24:08 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 225 2019-10-11 15:24:10 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 250 2019-10-11 15:24:12 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 275 2019-10-11 15:24:14 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 300 2019-10-11 15:24:16 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 325 2019-10-11 15:24:18 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 350 2019-10-11 15:24:21 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 375 2019-10-11 15:24:23 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 385 2019-10-11 15:24:25 driver-btm-soc.c:5196:increase_freq_by_eeprom_slowly: max = 385 ,min = 385 2019-10-11 15:24:25 driver-btm-soc.c:5202:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ... 2019-10-11 15:24:25 driver-btm-soc.c:5230:increase_freq_by_eeprom_slowly: chain 0 final freq setting: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 2019-10-11 15:24:25 driver-btm-soc.c:5242:increase_freq_by_eeprom_slowly: set chain 0 to working voltage 2019-10-11 15:24:25 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[10.20]-data[026] now setting chain[0]-volt[10.17]-data[027] now setting chain[0]-volt[10.14]-data[028] now setting chain[0]-volt[10.11]-data[029] now setting chain[0]-volt[10.08]-data[030] 2019-10-11 15:24:44 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try! now setting chain[0]-volt[10.02]-data[032] now setting chain[0]-volt[09.97]-data[034] now setting chain[0]-volt[09.95]-data[035] now setting chain[0]-volt[09.92]-data[036] 2019-10-11 15:25:02 power.c:1331:slowly_set_working_power_t11: done! 2019-10-11 15:25:02 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 125 2019-10-11 15:25:04 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 150 2019-10-11 15:25:06 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 175 2019-10-11 15:25:08 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 200 2019-10-11 15:25:10 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 225 2019-10-11 15:25:12 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 250 2019-10-11 15:25:14 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 275 2019-10-11 15:25:17 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 300 2019-10-11 15:25:19 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 325 2019-10-11 15:25:21 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 350 2019-10-11 15:25:23 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 375 2019-10-11 15:25:24 temperature.c:2117:is_temperature_too_high: Warning: temperature is too high 2019-10-11 15:25:24 temperature.c:1195:disable_hash_board: disable_pic_dac as status_value 3 2019-10-11 15:25:26 driver-btm-soc.c:7241:bitmain_soc_prepare: bitmain soc init failed. 2019-10-11 15:25:26 util.c:2178:process_version_mask: Pool 2 Version num is 2 2019-10-11 15:25:26 util.c:2178:process_version_mask: Pool 2 Version num is 2 2019-10-11 15:25:26 util.c:2178:process_version_mask: Pool 1 Version num is 2 2019-10-11 15:25:26 util.c:2178:process_version_mask: Pool 1 Version num is 2 2019-10-11 15:25:27 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 15:25:35 driver-btm-soc.c:6916:send_job: Version num 1
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4172
Merit: 8117
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 06:14:28 PM |
|
humor me and only power 1 hashboard and don't make nicehash your first pool try a pool like http://solo.ckpool.org/ pool solo.ckpool.org:3333 user "use a btc address you control" password x try each hashboard 1 at a time I see a temp error buried in there you may have 1 bad board. Maybe we can get 2 of them to work
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2282
Merit: 6427
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 06:29:43 PM |
|
it's screaming out loud dude. 2019-10-11 15:25:24 temperature.c:2117:is_temperature_too_high: Warning: temperature is too high
are you using some duct or anything blocking the air intake / exhaust ? This is my S9k's kernel shows when its done tuning. 2019-10-03 03:20:50 driver-btm-soc.c:5221:increase_freq_by_eeprom_slowly_new: chain[1] increase to 385 2019-10-03 03:20:51 driver-btm-soc.c:5231:increase_freq_by_eeprom_slowly_new: max = 385 ,min = 385 2019-10-03 03:20:51 driver-btm-soc.c:5237:increase_freq_by_eeprom_slowly_new: chain[1] increaseing the diff freq ... 2019-10-03 03:20:51 driver-btm-soc.c:5265:increase_freq_by_eeprom_slowly_new: chain 1 final freq setting: The first thing I would check would be the fans. that can be anywhere from several minutes and by some reports up to an hour. During tuning you get the "Connection refused" message and it goes away when tuning is done.
The S9k takes a lot longer than the other S9 versions (S9,S9i,S9j) but nothing more than 5 mins to start hashing, at least based on my experience.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4172
Merit: 8117
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 06:46:21 PM Last edit: October 12, 2019, 03:29:46 AM by frodocooper |
|
I have four of them they like all the pools filled in correctly. They take 5-10 minutes to fire 🔥 up.
Maybe he has a bad fan or a really hot board.
I have not touched on his transformer not being able to run the psu but if he does one board at a time and all work it could be an issue with the psu not getting enough power.
|
|
|
|
gearshiftjb (OP)
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 06:57:22 PM |
|
okay, first I'm going to look into the fan, then try each hashboard individually and keep it running for a couple hours, and if I find one that seems bad, I'll report back with a kernel log from it after keeping it running for 1-2 hours if I can. I'll touch back either later tonight or earlyish tomorrow.
Thank you both thus far.
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2282
Merit: 6427
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 07:25:32 PM |
|
I have not touched on his transformer not being able to run the psu but if he does one board at a time and all work it could be an issue with the psu not getting enough power.
That is a possibility, but what are the chances that the kernel log wouldn't throw any power related error? it is usually best to start troubleshooting the obvious errors before speculating, a very common issue is the fan grill , during shipping and handling the grill can bend a bit, pushes against the fan's motor and as a result of the fraction created by the grill - the fans don't spin fast enough. judging the kernel log, it is safe to assume that this is not a pool / internet related issue 2019-10-11 04:43:52.779] Pool 0 difficulty changed to 65536 This line wouldn't show up if the miner couldn't connect to the pool , so let's wait and see if replacing the fan/s will fix this issue. I'll report back with a kernel log from it after keeping it running for 1-2 hours if I can.
It is safe to assume that if it does not start hashing in 30 mins, it will probably never start.
|
|
|
|
gearshiftjb (OP)
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 07:31:34 PM Last edit: October 12, 2019, 03:30:33 AM by frodocooper |
|
Messing with the intake fan fixed it (for now). It is hashing for the first time since I've got it. Thank you very much. If I notice it start to act up I'll definitely come back to these boards for assistance. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203696K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25680K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12640K (ccea9000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2109795351 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E693EB69-0338-4A01-A65D-9E767A4A307B, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1751317449 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model alloc_contig_range: [e043, e044) PFNs busy IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready alloc_contig_range: [e043, e044) PFNs busy IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2019-10-11 19:02:33.066] httpListenThread start ret=0 [2019-10-11 19:03:03.067] start listen on 6060 ... [2019-10-11 19:08:57.886] setStartTimePoint total_tv_start_sys=424 total_tv_end_sys=425
2019-10-11 19:02:33 driver-btm-soc.c:6298:bitmain_soc_init: This is Antminer S9k scan user version 2019-10-11 19:02:33 driver-btm-soc.c:6304:bitmain_soc_init: special mode: disabled 2019-10-11 19:02:33 driver-btm-soc.c:6311:bitmain_soc_init: This is high performance mode 2019-10-11 19:02:33 driver-btm-soc.c:6316:bitmain_soc_init: last commit version: 5914201 commit time: 2019-09-29 11:57:01 build: 2019-09-29 15:32:19 2019-10-11 19:02:33 driver-btm-soc.c:6337:bitmain_soc_init: Detect 256MB control board of XILINX 2019-10-11 19:02:33 driver-btm-soc.c:6340:bitmain_soc_init: Miner compile time: Sun Sep 29 15:25:10 CST 2019 type: Antminer S9k 2019-10-11 19:02:33 driver-btm-soc.c:849:check_chain: get_hash_on_plug is 0x7 2019-10-11 19:02:33 driver-btm-soc.c:861:check_chain: !! chain[0]is exist 2019-10-11 19:02:33 driver-btm-soc.c:861:check_chain: !! chain[1]is exist 2019-10-11 19:02:33 driver-btm-soc.c:861:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 79 12 00 00 80 ff ff ff 39 10 96 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 6d 12 00 00 80 ff ff ff 39 10 d7 3f 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff c3 4d 4d 4d 4d 4d 4d 4d 4d 00000090 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000a0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000b0 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 4d 000000c0 4d 4d 4d 4d 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 48 12 00 00 80 ff ff ff 39 10 c6 45
read chain[0] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 0 chip level: 2 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 9.44 max_aging_voltage: 9.84 sweep_min_freq: 270M sweep_max_freq: 310M
sweep config for hpf mode: sweep_start_voltage: 9.90 max_aging_voltage: 10.30 sweep_min_freq: 355M sweep_max_freq: 385M 2019-10-11 19:02:44 driver-btm-soc.c:5757:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
chain 1 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
chain 2 freq: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385
2019-10-11 19:02:44 driver-btm-soc.c:6430:bitmain_soc_init: reset all... 2019-10-11 19:02:46 driver-btm-soc.c:6438:bitmain_soc_init: miner ID : 801264c675104814 2019-10-11 19:02:46 driver-btm-soc.c:6099:init_miner_version: FPGA Version = 0xB00D 2019-10-11 19:03:06 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2019-10-11 19:03:06 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2019-10-11 19:03:07 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2019-10-11 19:03:07 power.c:185:power_init: power init ... 2019-10-11 19:03:07 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[0] eeprom 2019-10-11 19:03:07 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.90 2019-10-11 19:03:07 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[1] eeprom 2019-10-11 19:03:07 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.90 2019-10-11 19:03:07 driver-btm-soc.c:4864:get_working_voltage_from_eeprom: get working vol [ 9.90] from chain[2] eeprom 2019-10-11 19:03:07 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.90 2019-10-11 19:03:07 driver-btm-soc.c:5547:update_highest_voltage: chain 0 hpf working voltage 9.90 2019-10-11 19:03:07 driver-btm-soc.c:5547:update_highest_voltage: chain 1 hpf working voltage 9.90 2019-10-11 19:03:07 driver-btm-soc.c:5547:update_highest_voltage: chain 2 hpf working voltage 9.90 2019-10-11 19:03:07 driver-btm-soc.c:5556:update_highest_voltage: open core at max voltage 10.20 2019-10-11 19:03:07 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 10.20 ... 2019-10-11 19:03:08 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 19:03:08 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 10.20 ... 2019-10-11 19:03:10 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 19:03:10 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 10.20 ... 2019-10-11 19:03:11 power.c:707:set_iic_power_by_voltage: now setting voltage to : 10.20 2019-10-11 19:03:12 driver-btm-soc.c:1259:get_ideal_hash_rate: get ideal hash rate 14000 2019-10-11 19:03:12 eeprom.c:675:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04729 GH/s
2019-10-11 19:03:12 eeprom.c:675:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04717 GH/s
2019-10-11 19:03:12 eeprom.c:675:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:385 IC[001]:385 IC[002]:385 IC[003]:385 IC[004]:385 IC[005]:385 IC[006]:385 IC[007]:385 IC[008]:385 IC[009]:385 IC[010]:385 IC[011]:385 IC[012]:385 IC[013]:385 IC[014]:385 IC[015]:385 IC[016]:385 IC[017]:385 IC[018]:385 IC[019]:385 IC[020]:385 IC[021]:385 IC[022]:385 IC[023]:385 IC[024]:385 IC[025]:385 IC[026]:385 IC[027]:385 IC[028]:385 IC[029]:385 IC[030]:385 IC[031]:385 IC[032]:385 IC[033]:385 IC[034]:385 IC[035]:385 IC[036]:385 IC[037]:385 IC[038]:385 IC[039]:385 IC[040]:385 IC[041]:385 IC[042]:385 IC[043]:385 IC[044]:385 IC[045]:385 IC[046]:385 IC[047]:385 IC[048]:385 IC[049]:385 IC[050]:385 IC[051]:385 IC[052]:385 IC[053]:385 IC[054]:385 IC[055]:385 IC[056]:385 IC[057]:385 IC[058]:385 IC[059]:385 voltage in mode2: 9.90 V hash rate in mode2: 04680 GH/s
2019-10-11 19:03:12 driver-btm-soc.c:6481:bitmain_soc_init: fan_eft : 0 fan_pwm : 0 2019-10-11 19:03:12 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 0 2019-10-11 19:03:12 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 2019-10-11 19:03:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2019-10-11 19:03:45 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 0, find asic num = 60 2019-10-11 19:03:49 driver-btm-soc.c:4617:set_freq_by_chain: chain[0] set freq:100.00 2019-10-11 19:03:49 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 19:03:49 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 0 2019-10-11 19:03:49 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 19:03:49 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 19:03:49 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 19:03:49 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 19:03:49 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 19:03:50 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[0] temp sensor info, correct! 2019-10-11 19:03:50 temperature.c:748:check_eeprom_calibration_data: chain[0] no need to calibrate ! 2019-10-11 19:03:50 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 19:03:50 temperature.c:763:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -5 -4 0 0 0 0 2019-10-11 19:03:50 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 19:03:50 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 19:03:50 temperature.c:818:calibration_sensor_offset: Chain[0] chip[31] use PIC middle temp offset=-5, typeID=55 2019-10-11 19:03:50 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[31] local:0 remote:0 offset:-5 2019-10-11 19:03:50 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[31] get middle temp offset=-5 typeID=55 2019-10-11 19:03:50 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 19:03:50 temperature.c:818:calibration_sensor_offset: Chain[0] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 19:03:51 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[0] Chip[40] local:0 remote:0 offset:-4 2019-10-11 19:03:51 temperature.c:870:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 19:03:51 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 1 2019-10-11 19:03:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2019-10-11 19:04:23 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2019-10-11 19:04:24 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 1, find asic num = 60 2019-10-11 19:04:28 driver-btm-soc.c:4617:set_freq_by_chain: chain[1] set freq:100.00 2019-10-11 19:04:28 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 19:04:28 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 1 2019-10-11 19:04:28 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 19:04:28 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 19:04:29 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 19:04:29 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 19:04:29 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 19:04:29 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[1] temp sensor info, correct! 2019-10-11 19:04:29 temperature.c:748:check_eeprom_calibration_data: chain[1] no need to calibrate ! 2019-10-11 19:04:29 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 19:04:29 temperature.c:763:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2019-10-11 19:04:29 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 19:04:29 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 19:04:29 temperature.c:818:calibration_sensor_offset: Chain[1] chip[31] use PIC middle temp offset=-4, typeID=55 2019-10-11 19:04:29 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[31] local:0 remote:0 offset:-4 2019-10-11 19:04:29 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[31] get middle temp offset=-4 typeID=55 2019-10-11 19:04:29 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 19:04:29 temperature.c:818:calibration_sensor_offset: Chain[1] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 19:04:30 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[1] Chip[40] local:0 remote:0 offset:-4 2019-10-11 19:04:30 temperature.c:870:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 19:04:30 driver-btm-soc.c:6128:bring_up_chain:
bring up chain 2 2019-10-11 19:04:30 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2019-10-11 19:05:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2019-10-11 19:05:03 driver-btm-soc.c:3794:check_asic_num: without pre_open_core chain 2, find asic num = 60 2019-10-11 19:05:07 driver-btm-soc.c:4617:set_freq_by_chain: chain[2] set freq:100.00 2019-10-11 19:05:07 driver-btm-soc.c:3840:open_core_BM1393_pre_open: pre open core = 13 2019-10-11 19:05:07 driver-btm-soc.c:3720:pre_open_core_one_chain: for chain 2 2019-10-11 19:05:07 temperature.c:591:is_eeprom_tempsensor_data_correct: check sensor info ... 2019-10-11 19:05:07 temperature.c:606:is_eeprom_tempsensor_data_correct: sensor type is TMP451 2019-10-11 19:05:08 temperature.c:618:is_eeprom_tempsensor_data_correct: 2 2019-10-11 19:05:08 temperature.c:632:is_eeprom_tempsensor_data_correct: sensor num is 2 2019-10-11 19:05:08 temperature.c:641:is_eeprom_tempsensor_data_correct: sensor pos = 31, 40, 0, 0 2019-10-11 19:05:08 temperature.c:659:is_eeprom_tempsensor_data_correct: chain[2] temp sensor info, correct! 2019-10-11 19:05:08 temperature.c:748:check_eeprom_calibration_data: chain[2] no need to calibrate ! 2019-10-11 19:05:08 temperature.c:524:is_tempsensor_data_correct: Bad,temp_info.type = 0 2019-10-11 19:05:08 temperature.c:763:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2019-10-11 19:05:08 temperature.c:801:calibration_sensor_offset: get temp info from eeprom,just use it! 2019-10-11 19:05:08 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x7a61, cmd_buf[2]=0x1a000000, misc=0x7a61 2019-10-11 19:05:08 temperature.c:818:calibration_sensor_offset: Chain[2] chip[31] use PIC middle temp offset=-4, typeID=55 2019-10-11 19:05:08 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[31] local:0 remote:0 offset:-4 2019-10-11 19:05:08 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[31] get middle temp offset=-4 typeID=55 2019-10-11 19:05:08 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x7a61, cmd_buf[2]=0x13000000, misc=0x7a61 2019-10-11 19:05:08 temperature.c:818:calibration_sensor_offset: Chain[2] chip[40] use PIC middle temp offset=-4, typeID=55 2019-10-11 19:05:09 temperature.c:346:do_calibration_sensor_offset_by_eeprom: New offset - Chain[2] Chip[40] local:0 remote:0 offset:-4 2019-10-11 19:05:09 temperature.c:870:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-4 typeID=55 2019-10-11 19:05:09 asic.c:1153:set_baud: set baud=1 2019-10-11 19:05:09 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 19:05:09 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 19:05:09 asic.c:1126:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2019-10-11 19:05:09 asic.c:1164:set_baud: read bc write is 0x82001a 2019-10-11 19:05:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 19:05:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 19:05:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 19:05:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 19:05:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41097818, cmd_buf[1]=0x6161, cmd_buf[2]=0x13000000, misc=0x6161 2019-10-11 19:05:09 asic.c:1429:set_misc_control: cmd_buf[0]=0x41099c18, cmd_buf[1]=0x6161, cmd_buf[2]=0x1a000000, misc=0x6161 2019-10-11 19:05:09 driver-btm-soc.c:6496:bitmain_soc_init: set TICKET_MASK 2019-10-11 19:05:10 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [23] 2019-10-11 19:05:10 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ... 2019-10-11 19:05:21 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [23] 2019-10-11 19:05:21 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ... 2019-10-11 19:05:32 temperature.c:2083:detect_startup_environment_temperature: Environment temperature: [23] 2019-10-11 19:05:32 temperature.c:2100:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ... 2019-10-11 19:05:42 driver-btm-soc.c:3871:set_clock_delay_control: set mode 0 2019-10-11 19:05:42 driver-btm-soc.c:3890:set_clock_delay_control: core_data = 0x04 2019-10-11 19:05:42 driver-btm-soc.c:3961:open_core_bm1393: Start Open Core!! 2019-10-11 19:05:48 driver-btm-soc.c:4028:open_core_bm1393: End Open Core!! 2019-10-11 19:05:49 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 125 2019-10-11 19:05:52 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 150 2019-10-11 19:05:54 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 175 2019-10-11 19:05:56 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 200 2019-10-11 19:05:58 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 225 2019-10-11 19:06:00 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 250 2019-10-11 19:06:02 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 275 2019-10-11 19:06:04 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 300 2019-10-11 19:06:06 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 325 2019-10-11 19:06:09 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 350 2019-10-11 19:06:11 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 375 2019-10-11 19:06:13 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[0] increase to 385 2019-10-11 19:06:15 driver-btm-soc.c:5196:increase_freq_by_eeprom_slowly: max = 385 ,min = 385 2019-10-11 19:06:15 driver-btm-soc.c:5202:increase_freq_by_eeprom_slowly: chain[0] increaseing the diff freq ... 2019-10-11 19:06:15 driver-btm-soc.c:5230:increase_freq_by_eeprom_slowly: chain 0 final freq setting: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 2019-10-11 19:06:15 driver-btm-soc.c:5242:increase_freq_by_eeprom_slowly: set chain 0 to working voltage 2019-10-11 19:06:15 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[10.20]-data[026] now setting chain[0]-volt[10.17]-data[027] now setting chain[0]-volt[10.14]-data[028] now setting chain[0]-volt[10.11]-data[029] now setting chain[0]-volt[10.08]-data[030] 2019-10-11 19:06:35 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try! now setting chain[0]-volt[10.02]-data[032] now setting chain[0]-volt[09.97]-data[034] now setting chain[0]-volt[09.95]-data[035] now setting chain[0]-volt[09.92]-data[036] 2019-10-11 19:06:52 power.c:1331:slowly_set_working_power_t11: done! 2019-10-11 19:06:52 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 125 2019-10-11 19:06:54 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 150 2019-10-11 19:06:56 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 175 2019-10-11 19:06:58 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 200 2019-10-11 19:07:00 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 225 2019-10-11 19:07:03 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 250 2019-10-11 19:07:05 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 275 2019-10-11 19:07:07 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 300 2019-10-11 19:07:09 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 325 2019-10-11 19:07:11 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 350 2019-10-11 19:07:13 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 375 2019-10-11 19:07:15 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[1] increase to 385 2019-10-11 19:07:17 driver-btm-soc.c:5196:increase_freq_by_eeprom_slowly: max = 385 ,min = 385 2019-10-11 19:07:17 driver-btm-soc.c:5202:increase_freq_by_eeprom_slowly: chain[1] increaseing the diff freq ... 2019-10-11 19:07:17 driver-btm-soc.c:5230:increase_freq_by_eeprom_slowly: chain 1 final freq setting: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 2019-10-11 19:07:17 driver-btm-soc.c:5242:increase_freq_by_eeprom_slowly: set chain 1 to working voltage 2019-10-11 19:07:17 power.c:1309:slowly_set_working_power_t11: set chain 1 to working voltage: now setting chain[1]-volt[10.20]-data[026] now setting chain[1]-volt[10.17]-data[027] now setting chain[1]-volt[10.14]-data[028] now setting chain[1]-volt[10.11]-data[029] now setting chain[1]-volt[10.08]-data[030] now setting chain[1]-volt[10.02]-data[032] now setting chain[1]-volt[09.97]-data[034] now setting chain[1]-volt[09.95]-data[035] now setting chain[1]-volt[09.92]-data[036] 2019-10-11 19:07:53 power.c:1331:slowly_set_working_power_t11: done! 2019-10-11 19:07:53 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 125 2019-10-11 19:07:55 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 150 2019-10-11 19:07:57 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 175 2019-10-11 19:07:59 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 200 2019-10-11 19:08:02 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 225 2019-10-11 19:08:04 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 250 2019-10-11 19:08:06 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 275 2019-10-11 19:08:08 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 300 2019-10-11 19:08:10 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 325 2019-10-11 19:08:12 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 350 2019-10-11 19:08:14 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 375 2019-10-11 19:08:16 driver-btm-soc.c:5180:increase_freq_by_eeprom_slowly: chain[2] increase to 385 2019-10-11 19:08:19 driver-btm-soc.c:5196:increase_freq_by_eeprom_slowly: max = 385 ,min = 385 2019-10-11 19:08:19 driver-btm-soc.c:5202:increase_freq_by_eeprom_slowly: chain[2] increaseing the diff freq ... 2019-10-11 19:08:19 driver-btm-soc.c:5230:increase_freq_by_eeprom_slowly: chain 2 final freq setting: 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 2019-10-11 19:08:19 driver-btm-soc.c:5242:increase_freq_by_eeprom_slowly: set chain 2 to working voltage 2019-10-11 19:08:19 power.c:1309:slowly_set_working_power_t11: set chain 2 to working voltage: now setting chain[2]-volt[10.20]-data[026] now setting chain[2]-volt[10.17]-data[027] now setting chain[2]-volt[10.14]-data[028] now setting chain[2]-volt[10.11]-data[029] now setting chain[2]-volt[10.08]-data[030] now setting 2019-10-11 19:08:41 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[10.02]-data[032] now setting chain[2]-volt[09.97]-data[034] now setting chain[2]-volt[09.95]-data[035] now setting 2019-10-11 19:08:53 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.92]-data[036] 2019-10-11 19:08:55 power.c:1331:slowly_set_working_power_t11: done! 2019-10-11 19:08:55 driver-btm-soc.c:6532:bitmain_soc_init: set to working voltage... 2019-10-11 19:08:55 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage: now setting chain[0]-volt[09.92]-data[036] chain[1]-volt[09.92]-data[036] chain[2]-volt[09.92]-data[036] 2019-10-11 19:08:57 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end! now setting chain[0]-volt[09.90]-data[036] chain[1]-volt[09.90]-data[036] chain[2]-volt[09.90]-data[036] 2019-10-11 19:08:57 driver-btm-soc.c:4916:set_timeout: freq 385 final timeout=340 2019-10-11 19:08:57 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0] 2019-10-11 19:08:57 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0] 2019-10-11 19:08:57 driver-btm-soc.c:2925:low_temp_process_parm_init: chip miner_type = [0] 2019-10-11 19:08:57 driver-btm-soc.c:3526:check_system_work: check system thread start... 2019-10-11 19:08:57 driver-btm-soc.c:6601:bitmain_soc_init: Init done! 2019-10-11 19:08:57 driver-btm-soc.c:7241:bitmain_soc_prepare: bitmain soc init success. 2019-10-11 19:08:58 util.c:2178:process_version_mask: Pool 2 Version num is 2 2019-10-11 19:08:58 util.c:2178:process_version_mask: Pool 2 Version num is 2 2019-10-11 19:08:58 util.c:2178:process_version_mask: Pool 1 Version num is 2 2019-10-11 19:08:58 util.c:2178:process_version_mask: Pool 1 Version num is 2 2019-10-11 19:08:58 temperature.c:1544:read_temp_func: bring_up_pcb_temp = 29 2019-10-11 19:08:58 driver-btm-soc.c:6916:send_job: Version num 2 2019-10-11 19:08:58 driver-btm-soc.c:6916:send_job: Version num 1 2019-10-11 19:13:56 driver-btm-soc.c:6269:need_mode2_startup: chain 0 rt_hash_rate 4705.78 ideal_hash_rate 4729 2019-10-11 19:13:56 driver-btm-soc.c:6269:need_mode2_startup: chain 1 rt_hash_rate 5057.61 ideal_hash_rate 4717 2019-10-11 19:13:56 driver-btm-soc.c:6269:need_mode2_startup: chain 2 rt_hash_rate 4749.75 ideal_hash_rate 4680
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2282
Merit: 6427
be constructive or S.T.F.U
|
Messing with the intake fan fixed it (for now). It is hashing for the first time since I've got it.
Great news, would be best if you could explain in detailed manner how did you "mess" with the fan , did you just try to bend the grill ? more details would be useful for future issues, please post as much details as you can so that others can benefit from these information. Thank you very much. If I notice it start to act up I'll definitely come back to these boards for assistance.
You are welcome, but if you really want to thank me, include the details I asked for ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) .
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4172
Merit: 8117
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2019, 09:14:35 PM Last edit: October 12, 2019, 03:30:58 AM by frodocooper |
|
Nice call a simple fan issue.
|
|
|
|
gearshiftjb (OP)
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2019, 12:42:17 AM |
|
further testing shows me that it works even without the transformer. I get to return that too now so for the fan, I just swapped the intake and exhaust position both on the ends of the miner and then it's location on the control board. I couldn't tell you why but that's all it seemed to need thankfully. next step is to figure out sound proofing and ventilation but im happy it's hashing right now.
|
|
|
|
Philipma1957cellphone
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2019, 01:45:35 AM Last edit: October 12, 2019, 03:31:36 AM by frodocooper |
|
good news. please let it breath as much as possible.
|
This is philipma1957 alt. Do not conduct business with this account
|
|
|
mikeywith
Legendary
Offline
Activity: 2282
Merit: 6427
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2019, 01:46:05 AM Last edit: October 12, 2019, 03:32:33 AM by frodocooper |
|
further testing shows me that it works even without the transformer. I get to return that too now ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Technically , a PSU labeled as 2500w on 240v should do just fine on 110v for an S9k which does not consume more than 1300w , but you should still be careful, just because it worked for a while it doesn't mean you should return the transformer right away, electricity related issues need a few hours and sometimes days to start coming your way. so for the fan, I just swapped the intake and exhaust position both on the ends of the miner and then it's location on the control board.
Thanks for the update, although it does not really make sense technical wise , but my thoughts are, one of the fans' wires was a bit loose, when you swapped them you secured them right and, bingo! , proof is, if you were to put them back in their original places, the miner will still work ( I would do that out of curiosity ) but I know many people wouldn't. next step is to figure out sound proofing and ventilation...
There are plenty of topics in regards to ventilation and sound proofing, before you start your own thread, please search the forum similar topics. Good luck.
|
|
|
|
|