yes except I won't buy the 3000 watts units. I wanted to do this as cheaply and safe as possible.
Also my goal is to be s17 pro and nothing else (won't happen but it is a nice goal).
I will photo the build.
fully assembled about 9 feet long
three pieces about 12 usd total
attached to an l6-30r circuit
ready to test the next s17pro due soon
These wires are 15amp rated so 12 amps 24/7/365
I have a solid 237-243 volts in my garage which is :
3300/237 = 13.924 amps
3200/237 = 13.502 amps
3100/237 = 13.080 amps
3000/237 = 12.658 amps
2900/237 = 12.236 amps
I could run anything under 2900 watts and be okay with this wire setup in my garage.
however in clifton
2900/217 = 13.364 amps
2800/217 = 12.903 amps
2700/217 = 12.442 amps
I need to be under 2700 watts.
And we still have the occasional low voltage valley of 187-190 volts. Yet to get a good response from power company on this issue.
However almost all the gear can deal with this for as much as a 30 minute drop in voltage.
once I factor 190 volts
I get
2400/190 = 12.63 amps
2300/190 = 12.105 amps
makes the s17 pros more attractive as they can ride out the low voltages without melting the wires.