Hi Guys,
Had a chance to briefly test one of these as well.
The gear is running smoothly at 54347.46 (
54Th), it is quieter (
58 dB ), pulls
3.12kW from the wall, and beautiful temps on both the hash board and the chips
Board 1 PCB 28-49-27-52 and Chips 50-59-45-64
Board 2 PCB 31-52-34-59 and Chips 53-65-55-70
Board 3 PCB 29-51-34-55 and Chips 54-62-55-66
Sleep mode meaning:
After a few tests found that it means the fans are running at around 59% - 60% - this allows the temperatures from above to be achieved and a very silent miner (compared to others, Inno T2T - 30 I am looking at you!
)
Would not even dare to test it if it would be one power cord probably
.
Can't wait to relocate it and hope for the best in this up and down market
.
Why:Before this model, on older s9/s you could select fan speed and other functions that were hidden (aka
Setup Mode) in the '
Miner Configuration' page if you would have right-clicked and
Inspect the page (by searching for Fan_Ctrl and erasing the ':none' after display).
One must/should have the option to view that and this should not be restricted. If one is not responsible then do not play here, but the option has to be there.
With the new T17e (
https://imgur.com/a/BMdeqrg) it appeared this has changed, among other things like the
Kernel Log in the
System tab.
I have managed to find the change and have attached photos on how to do it yourself to unlock the hidden menu again (
Setup Mode).
Steps:1. first step, go to your AntMiner
Miner Configuration tab
https://imgur.com/a/Sm9O0p52. right-click and select Inspect (in safari is Inspect Element)
https://imgur.com/a/q2bgh493. in the search box (mine was on the right lower corner) type
fan_ctrl and hit search
https://imgur.com/a/phtiw3B4. On the second result found, it will allow you to edit the results on your right (NB. once you close the page and open it again you will have to start from number 1 again, as settings will not save and you will not have them visible upon revisiting). - see left-hand side arrow in the image at step 3.
5. in previous miners you could just delete the
:none wording and the function would have re-appeared in the menu. Now, you need to activate the menu and then delete the
:none value for what you want to change in order to see it, followed by deleting the
:none wording for any function that you wish to see in the new area.
https://imgur.com/a/VYodnvm6. Enjoy your new accessible settings which should look like this:
https://imgur.com/a/4hW4IIMAlso, this equipment is almost 20 dB silent than previous ones. Must be the Sleep mode function.
Moreover, if only delete the :none value no damage will happen to you miner,
but if you change the values there - may that be whatever, you bear responsibility for it!
This is how the actual code looks like, you just have to find all the
:none and
delete them<fieldset class="cbi-section" id="cbi-cgminer-default" style="display:none">
<legend>Setup</legend>
<div class="cbi-value" id="beep" style="display:none">
<label class="cbi-value-title" for="keep">Beeper ringing</label>
<div class="cbi-value-field">
<input type="checkbox" name="ant_beeper" id="ant_beeper" checked="">
</div>
</div>
<div class="cbi-value" id="temp_over" style="display:none">
<label class="cbi-value-title" for="keep">Stop running when temprerature is over 80℃ </label>
<div class="cbi-value-field">
<input type="checkbox" name="ant_tempoverctrl" id="ant_tempoverctrl" checked="">
</div>
</div>
<div class="cbi-value" id="fan_ctrl" style="display:none">
<label class="cbi-value-title" for="keep">Customize the fan speed percentage</label>
<div class="cbi-value-field">
<input type="checkbox" name="ant_fan_customize_check" id="ant_fan_customize_switch">
<input type="text" class="cbi-input-text" style="width:30px;" name="ant_fan_customize_box" id="ant_fan_customize_value" value="">%
</div>
</div>
<div class="cbi-value">
<label class="cbi-value-title" for="keep">Work Mode</label>
<div class="cbi-value-field" id="miner_work_mode"> <input type="radio" id="ant_work_mode_sleep" name="ant_work_mode" value="0xfe" checked=""> Sleep Mode <br> <input type="radio" id="ant_work_mode_1" name="ant_work_mode" value="1"> Low Power<br> <input type="radio" id="ant_work_mode_2" name="ant_work_mode" value="2"> Normal</div>
</div>
<div class="cbi-value" id="cbi-bmminer-default-voltage" style="display:none">
<label class="cbi-value-title" for="cbid.bmminer.default.voltage">Set Voltage:(CAUTION: This setting may damage the miner, please test smaller value first!)</label>
<div class="cbi-value-field">
<select id="ant_voltage" class="cbi-input-text">
<option value="1700"> 17.00V </option>
<option value="1710"> 17.10V </option>
<option value="1720"> 17.20V </option>
<option value="1730"> 17.30V </option>
<option value="1740"> 17.40V </option>
<option value="1750"> 17.50V </option>
<option value="1760"> 17.60V </option>
<option value="1770"> 17.70V </option>
<option value="1780"> 17.80V </option>
<option value="1790"> 17.90V </option>
<option value="1800"> 18.00V </option>
<option value="1810"> 18.10V </option>
<option value="1820"> 18.20V </option>
<option value="1830"> 18.30V </option>
<option value="1840"> 18.40V </option>
<option value="1850"> 18.50V </option>
<option value="1860"> 18.60V </option>
<option value="1870"> 18.70V </option>
<option value="1880"> 18.80V </option>
<option value="1890"> 18.90V </option>
<option value="1900"> 19.00V </option>
<option value="1910"> 19.10V </option>
<option value="1920"> 19.20V </option>
<option value="1930"> 19.30V </option>
<option value="1940"> 19.40V </option>
<option value="1950"> 19.50V </option>
<option value="1960"> 19.60V </option>
<option value="1970"> 19.70V </option>
<option value="1980"> 19.80V </option>
<option value="1990"> 19.90V </option>
<option value="2000"> 20.00V </option>
</select>
</div>
</div>
<div class="cbi-value" id="cbi-bmminer-default-freq" style="display:none">
<label class="cbi-value-title" for="cbid.bmminer.default.freq">Set Frequency:</label>
<div class="cbi-value-field">
<select id="ant_freq" class="cbi-input-text">
<option value="200"> 200.00M </option>
<option value="225"> 225.00M </option>
<option value="250"> 250.00M </option>
<option value="275"> 275.00M </option>
<option value="300"> 300.00M </option>
<option value="325"> 325.00M </option>
<option value="350"> 350.00M </option>
<option value="375"> 375.00M </option>
<option value="400"> 400.00M </option>
<option value="425"> 425.00M </option>
<option value="450"> 450.00M </option>
<option value="475"> 475.00M </option>
<option value="500"> 500.00M </option>
<option value="525"> 525.00M </option>
<option value="550"> 550.00M </option>
<option value="575"> 575.00M </option>
<option value="600"> 600.00M </option>
<option value="625"> 625.00M </option>
<option value="650"> 650.00M </option>
<option value="675"> 675.00M </option>
<option value="700"> 700.00M </option>
<option value="725"> 725.00M </option>
<option value="750"> 750.00M </option>
<option value="775"> 775.00M </option>
<option value="800"> 800.00M </option>
</select>
</div>
</div>
</fieldset>