tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
May 18, 2020, 06:23:25 PM |
|
Update profit on Kawpow with TRM v0.7 Algo: Kawpow Coin: RVN Hashrate: 16.2 Mh/s Power: 120w Miner: TeamRedMiner v0.7 On power save Hashrate: 10.2 Mh/s Power: 76w On mid power Hashrate: 18.3 Mh/s Power: 135w For Free Electric Hashrate: 20.6 Mh/s Power: 167w
|
|
|
|
Xazax310
Member
Offline
Activity: 246
Merit: 24
|
|
May 22, 2020, 01:19:37 AM |
|
Can you share your overclock settings to get 16mh/s @ 120w?
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
May 22, 2020, 03:33:00 PM |
|
Can you share your overclock settings to get 16mh/s @ 120w?
Power Consume :refer from HWinfo GPU Chip Power MSI Afterburner config GPU as below, Core Voltage: -81mV Power Limit: -20 Core Clock: Default Memory Clock:Default 120w from HWinfo and on Clamp Meter get 149w per GPU(depend on Power Supply 1300w 80+GOLD 3 GPU+riser connected not include pc system) for more information, 76.2w from HWinfo and on Clamp Meter 83.6w -> 10.5mh/s 89.6w from HWinfo and on Clamp Meter 104.1w -> 12.5mh/s 104.7w from HWinfo and on Clamp Meter 129w -> 14.5mh/s 112.1w from HWinfo and on Clamp Meter 138.6w -> 15.5mh/s 134.6w from HWinfo and on Clamp Meter 175w -> 18.3mh/s 149.4w from HWinfo and on Clamp Meter 209w -> 19.3mh/s 162.8w from HWinfo and on Clamp Meter 242w -> 20mh/s Sometime low sometime high power on Clamp Meter, tried hard to test this algo.
|
|
|
|
Xazax310
Member
Offline
Activity: 246
Merit: 24
|
|
May 22, 2020, 06:27:13 PM |
|
Thanks I have a R9 FURY doing 160w @ 18mh/s (850 core/850mv/500mem) (220w at wall on Octominer riseless mobo).
Have you tried unlocking your Nano for extra shaders? I tried mine but it wasn't able to unlock at all.
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
May 22, 2020, 07:01:45 PM |
|
Thanks I have a R9 FURY doing 160w @ 18mh/s (850 core/850mv/500mem) (220w at wall on Octominer riseless mobo).
Have you tried unlocking your Nano for extra shaders? I tried mine but it wasn't able to unlock at all.
I use last update official bios https://www.amd.com/en/support/gpu-firmware-download
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
July 08, 2020, 10:36:18 AM |
|
Update mining with algo Argon2d and Beam Hash III
Algo: Beam Hash III(BEAM) Coin: BEAM Hashrate: 16 sol/s Power: 115w Miner: lolMiner 1.02 (ver 1.03 is not better than 1.02)
-------------------------------------------- Algo: Argon2d(NIM) Coin: NIM Hashrate: 390 kh/s Power: 120w Miner: TeamRedMiner v0.7.7
On power save Hashrate: 288 kh/s Power: 75w
On mid power Hashrate: 390 kh/s Power: 120w
For Free Electric Hashrate: 412 kh/s Power: 145-156w
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
July 12, 2020, 02:56:26 PM |
|
Update hashrate Beam Hash III
Algo: Beam Hash III(BEAM) Coin: BEAM Hashrate: 20 sol/s Power: 120w Miner: lolMiner 1.04
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
October 26, 2020, 03:03:17 PM |
|
Suggest profit on Chukwa v2
Algo: Chukwa v2 Coin: TRTL Miner: Teamredminer v0.7.16b
On mid power Hashrate: 34kh/s Power: 120w
For High power Hashrate: 36Mh/s Power: 141w
For expert miner can use "AMD Memory Tweak XL" config --REF 104 --tRFC 48 --tRC 20 --tRCDR 6 --tRCDW 6 --tRCDRA 6 --tRCDWA 6 --tR2W 6 --tW2R 6 --tFAW 1 Thanks for Discord user: mrdx#0572
Result is On mid power Hashrate: 36kh/s Power: 120w
For High power Hashrate: 40Mh/s Power: 141w
|
|
|
|
fmz89
Legendary
Offline
Activity: 1766
Merit: 1002
|
|
October 28, 2020, 07:04:07 AM |
|
Who have R9 NANO rig, What about your mining? Still mining? For me. I'm fine I'm OK. Still fun mining. Share your Earning and Performance about R9 NANO I will share performance by algo, hashrate, electric, miner, os for more in next time. -----------------------------------Performance---------------------------------- Base on Win10Driver 19.10.1, 18.6.1 Power Consume :refer from HWinfo GPU Chip Power MSI Afterburner config GPU as below,Core Voltage: -81mV Power Limit: depend on algo Core Clock: Default Memory Clock:Default Algo: Chukwa v2Coin: TRTL Hashrate: 34kh/s Power: 120w Miner: Teamredminer v0.7.16b Algo: Argon2d(NIM)Coin: NIM Hashrate: 390 kh/s Power: 120w Miner: TeamRedMiner v0.7.7 Algo: Beam Hash III(BEAM)Coin: BEAM Hashrate: 20 sol/s Power: 120w Miner: lolMiner 1.04 Algo: KawpowCoin: RVN Hashrate: 16.2 Mh/s Power: 120w Miner: TeamRedMiner v0.7 Algo: Argon2id ChukwaCoin: TRTL,...+ Hashrate: 95kh/s Power: 104w Miner: Teamredminer v6.1 This is Power from HWinfo and on Clamp MeterHWinfo Clamp Meter76.2w 83.6w 89.6w 104.1w 104.7w 129w 112.1w 138.6w 119w 150w 134.6w 175w 149.4w 209w 162.8w 242w 34khs in trtl v2 is good hashrate, i had one, lay down never mine with nano again i know nano has good eficiency compared to newer card and easy to config with bios editing old card its niice simple flashing mod bios and good to go, no need other config, this card quite hot with single fan
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
October 28, 2020, 02:19:28 PM |
|
Yes, r9 nano easy to config OC.
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
January 13, 2022, 10:52:26 AM |
|
For now, Kowpow is not the Best Profit on R9 NANO I suggest to mine NIMIQ, when difficalty is low. For Check Diff https://metrics.nimiq.cafe/difficulty-growthAlgo: Argon2d(NIM) Coin: NIM Hashrate: 390 kh/s Power: 120w Miner: TeamRedMiner
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
January 13, 2022, 10:54:44 AM |
|
And the another way, suggest to see TONCOIN it time to take profit Algo: Darkcoin Coin: TONCOIN Hashrate: 1020 MH/s Power: 104w Miner: lolminer 1.42
|
|
|
|
Mr.merson
|
|
July 20, 2022, 07:30:37 PM |
|
Does anyone still keep memory strap modded in hexadecimal format or at least biod mod? I have the original straps but I have no way to decode it, there is nothing related to the HBM memories (linux user, amdmemtweak doesn't work there on fiji-HBM architecture)
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
July 21, 2022, 05:34:26 AM |
|
Does anyone still keep memory strap modded in hexadecimal format or at least biod mod? I have the original straps but I have no way to decode it, there is nothing related to the HBM memories (linux user, amdmemtweak doesn't work there on fiji-HBM architecture)
What the mining result with memory strap modded? amdmemtweak work fine on HiveOS. You can run command with menu "Run Command". example command "amdmemtweak --REF 17000 --RFC 48 --RC 20 --RCDR 6 --RCDW 6 --RCDRA 6 --RCDWA 6 --R2W 6 --W2R 6 --FAW 1" If you have good strap mod command, let me know it, I have 10 Fury NANO
|
|
|
|
Mr.merson
|
|
July 21, 2022, 11:33:13 AM |
|
Does anyone still keep memory strap modded in hexadecimal format or at least biod mod? I have the original straps but I have no way to decode it, there is nothing related to the HBM memories (linux user, amdmemtweak doesn't work there on fiji-HBM architecture)
What the mining result with memory strap modded? amdmemtweak work fine on HiveOS. You can run command with menu "Run Command". example command "amdmemtweak --REF 17000 --RFC 48 --RC 20 --RCDR 6 --RCDW 6 --RCDRA 6 --RCDWA 6 --R2W 6 --W2R 6 --FAW 1" If you have good strap mod command, let me know it, I have 10 Fury NANO I am precisely in hiveos and apparently it does not seem to work, as an example I have implanted straps in vbios and amdmemtweak apparently does not reflect the changes I have confirmed that the changes can be "remarkable" I have some timing strap that I got on the internet but I don't know for sure what changes there are in those straps because I haven't found tools to decode it (there is only for GDDR5)
|
|
|
|
Mr.merson
|
|
July 21, 2022, 11:36:56 AM |
|
PD, in any case if it has the shortened version (the fury with 56 cu sapphire) I can upload the vbios with the modified timing and you will be able to verify that amdmemtweak does not reflect the changes although in mining it behaves differently
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
July 22, 2022, 03:14:35 AM |
|
PD, in any case if it has the shortened version (the fury with 56 cu sapphire) I can upload the vbios with the modified timing and you will be able to verify that amdmemtweak does not reflect the changes although in mining it behaves differently
I have version 64cu and I can applay timing with amdmemtweak it reflect to some algorithm as Argon2d-nim hash from 360 KH/s to 400 KH/s. But now not time to mine NIM
|
|
|
|
Mr.merson
|
|
July 22, 2022, 03:35:53 AM |
|
PD, in any case if it has the shortened version (the fury with 56 cu sapphire) I can upload the vbios with the modified timing and you will be able to verify that amdmemtweak does not reflect the changes although in mining it behaves differently
I have version 64cu and I can applay timing with amdmemtweak it reflect to some algorithm as Argon2d-nim hash from 360 KH/s to 400 KH/s. But now not time to mine NIM I suppose that the versions of 56 have a bottleneck due to the missing cu.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3808
Merit: 1723
|
|
July 22, 2022, 03:45:49 AM |
|
Its rare to have people actually mining with the R9 Fury. I remember back in 2015 they were very expensive and had many hardware defects and people either used the slightly less efficient R9 290X or they waited until the Polaris came out in 2016 and the efficiency was pretty much on par. After summer 2016, nobody really used the Fury for mining.
They were popular with gamers and most miners sold their Furys and bought some Polaris cards. So this is why you don't really hear too much discussion about the chipset. I think it was AMDs least produced chipset.
|
|
|
|
tale01 (OP)
Newbie
Offline
Activity: 121
Merit: 0
|
|
July 22, 2022, 05:01:15 AM |
|
Its rare to have people actually mining with the R9 Fury. I remember back in 2015 they were very expensive and had many hardware defects and people either used the slightly less efficient R9 290X or they waited until the Polaris came out in 2016 and the efficiency was pretty much on par. After summer 2016, nobody really used the Fury for mining.
They were popular with gamers and most miners sold their Furys and bought some Polaris cards. So this is why you don't really hear too much discussion about the chipset. I think it was AMDs least produced chipset.
I still mining with R9 NANO. I give some information for someone who have R9 Fury. Not suggestion to buy it now.
|
|
|
|
|