Asic.to Firmware 17Series • Optimized efficiency/Performance •

[taserz]

Antminer S17+/T17+ S17 and T17  custom firmware!

If you own a mining farm/hotel or have a large number of S17 or T17 500+ contact me for a better deal and to hear about our partnership program.

Asic.to has developed a firmware for the Antminer S17/S17 Pro and T17 Antminer. You can download and install it on your machine to improve your profits.

Antminer S17 / T17 Overclocking
Performance ~+30%
The ability to downvolt ~ 15-25%
Antminer S17(normal) to 70-85th/s (~3100-3760w)
Antminer T17 up to 65th/s (consumption ~ 3000W)

Antminer T17 Downvolts to 1900w at 42th/s - 45w/th

(Attention! Firmware is still new, in order to avoid breakdowns it is recommended to increase overclock slowly.)

Features
Overclocking: over 85th/s with S17 and 65th/s T17!
ASICboost and autotuning: On all of our versions include auto-tuning frequency to get the best efficiency as well as utilizing ASICboost.
Decrease Hardware Errors
ENERGY SAVING
No Bmminer
Immersion-ready/Fan Disable: Support for high-efficiency liquid immersion cooling by disabling the fan in the settings.
Lower Thermal Threshold: Lowers default overheat protection to ensure machines last longer.
Full-farm deployment: Send out a configuration file to an unlimited number of miners on the same network. No reboot required!
Power monitoring: Built-in wattmeter function.
Search: Find Other Asic on the network.
Password Change: Ability to mass change passwords and ssh port.
Multi-ASIC roll-out: Setup one machine and install it on all of them with just 1 click.
Free – Download and begin using immediately.  Small 2.8% fee to keep the project going.
Supports popular ASICs: Support for all Antminer S17/T17,S9/S9i/S9j models.
Stable: Automated voltage tuning for best hashboard stability and performance.
Sleep Mode: Mining can stop and fans drop to normal speed using very little power.
Asic Virus Scanner: Tool that checks pre-owned asics for night switcher and other variants.
Easy Uninstallation

Check out: https://asic.to/antminer-s17-t17-optimized-firmware/

Notice you need to unlock SSH for the S17 and T17 models. Click here for instructions on how to unlock SSH.

Notice: When using chip Manual Tune. DO NOT increase chip frequency above 20% of base frequency of board. Just use AutoTune!!!

Please Take Notice
As we all should know my now tampering with your machines can damage the machine. Do so at your own risk... But have fun! TO THE MOON

My Kia forte can do just over 100 miles an hour on a slight downhill straight way.

I did it one time. I don't push it.

Same with mining gear.

edit: I have been notified someone is possibly impersonating on telegram.

Telegram chat for assistance: https://t.me/AsicTo

Change log:


Hi Guys.
Meet 2.0.1 release for Antminer s17, s17pro, t17, s17+, t17+.

Changes:
1) Modified, improved and accelerated the work of autotune.
2) Added an option that ignores the minimal voltage set in profile.
3) Corrected the mixed-up data entry in the auto-switch section.
 4) renamed “fan rpm check” to “immersion mode” and moved to the settings section.


Hi guys.

Meet firmware release 2.0.0 for Antminer s17, s17Pro, s17+, t17, t17+

Changes:
1. General stability, refinement and refactoring of the main driver.
2. Improved display of chip hashrate.
3. Fixed the output display of the current timezone in the regional settings.
4. Made minor changes to the design of the web gui.
5. New profiles added:
S17 - 55th, 60th, 63th.
S17+ - 55th, 60th, 62th, 68th, 74th, 80th, 88th.
T17 - 40th.
T17+ - 40th, 48th, 55th, 63th, 68th.
6. Added an automatic correction of red domains (TIMER).
7. Extended voltage search ranges for auto-tuner profiles.
8. Added full customization of the miner’s manual auto-tuning.
9. Made a smooth change in the fan speed during miner initialization (without a sharp jump).
10. Added protection for breaking the chip chain to prevent equipment failure.
11. Added automatic “emergency” cooling mode, in case of “loss” of  the miner temp sensors.
12. Added processing of erroneous data from temperature sensors.
13. Modified Log, now the status of the miner has become more understandable and detailed.
14. Implemented saving all miner logs even in the event of a complete reboot.
15. And most importantly, your miner will forget about overheating, bringing you a profit with maximum uptime due to the automatic switching of auto tuner profiles with a flexible system of settings to adapt the miner to changes in ambient temperature.  Switching profiles is carried out by setting the temperature range and fan speeds for (automatic mode).


Hi guys.
I am glad to present the first official release of the Best mining firmware version 1.0.0 for Antminers s17 & T17


Hi Guys.
Meet the new release for Antminer S17, S17 Pro, T17, S17 +, T17 + version 1.1.0 from the best development team✌🏻.

1) General stability, code refactoring to simplify adding support for other models and finalizing the main driver.
2) Full support for S17+.
3) Full support for T17+.
4) Added a new way of reading temperature sensors (rewritten from scratch).
5) Automatic switching to a lower profile when the miner overheats.
6) Automatically switches to a lowered profile when it is not possible to tune the selected profile.
7) Added a trigger for the maximum number of miner restarts in case of a board failure.
Cool Improved cooler speed control algorithm (smooth transition from manual to automatic mode without failures).
9) Fixed error setting voltage in manual mode.
10) Fixed the minimum hash rate check (worked when the value was 0 as disabled in the config).
11) Added information on all successful profiles tuned.
12) Added protection of the miner against hashrate theft by viruses.
13) Low temperatures mode is activated only when the silent mode is on (silent start).
14) A trigger has been added that makes it possible to disable the function of heating (pre-heating) chips.
15) Fix a bug, when the firmware sets the cooler speed to 100% in manual mode.


1.0.0
 1. General stability.
 2. Correction of profile parameters for  S17 / T17.
 3. Improved nicehash support (extranonce subscribe).
 4. Added trigger to disable / enable voltage (cold start).
 5. Added trigger to disable / enable domain unbalance check.
 6. Added the ability of target chip temp (new proprietary and much cooler adjustment method, which significantly reduced fan speed).
 7. Implemented support for a “quiet" start of the miner.
 8. Automatic transfer of the miner to warm-up mode when starting in cold conditions.
 9. Added registration of dead chips during autotune.
 10. Improved and significantly reduced the launch time of the miner.
 11. Added saving chips freq / autotune result for subsequent manual pre-tuning.
 12. Added checking for all types of viruses that we know about today.
 13. All functionality is added to the config multiplier section.
 14. Activated time zone.
 15. Added the estimated power consumption by the miner (electronic wattmeter).
 16. The status of the miner (its API) is available immediately at startup after 15 seconds.
 17. Added The ability to set the critical temperature of the chips to automatically disable the hash board.


0.9.9
 1) The autotune work has been finalized and fully adjusted.
 2) Completely rewritten algorithm for adjusting the voltage of the chips.
 3) Improved method for controlling unbalanced domains.
 4) Adjusted and fully customized profiles.
 5) Added compatibility with BTC Tools version 1.2.6.
 6) Fixed config multiplier with batch propagating workers.
 7) Added pool support for nicehash.com.
 Cool Added pool support for warphash.com.
 9) Checked and fixed stability of the emcd.io pool


New release, 0.9.8_beta for Antminer S17 & T17 models

What is done:
1. General stability
2. Extended and refactored the main driver.
3. The next iteration of refinement and improvement of errors (HW)
4. Hash rate loss on some pools was analyzed and fixed.
5. Added support for P2P pool.
6. Activated the multiplier for the distribution of mass batch configs.
7. Work on with the reading of temperature sensors I2C
8. Created more than 10 overclocking profiles.
9. Added autotune!!! (note, autotune results are saved in a separate config, when changing a profile to a new one and returning to the previous profile, a repeated autotune is not required, except for a forced retune by the user).
After the completion of the tune, “temporarily” changes to the chips in the manual section of gui are not displayed.
10. Autotune is taken out as a separate log in the profiles section.
11. Automatic reboot when unbalancing domains to save chips from burnout.
12. Added manual downgrade of the entire domain.

[1714104126]

1714104126

[1714104126]

1714104126

[1714104126]

1714104126

[taserz]

Place holder for information to come. Tips, Tweaks, Recommended settings by the community.

[philipma1957]

i will try this soon.

[Biffa]

Free – Download and begin using immediately.  Small 2.8% fee to keep the project going.

So... Not free then.

[taserz]

So... Not free then.

Where did I ask you to pay?

Please keep it on topic. Don't really want the thread going off-topic on the first page. But the Second page I say we talk about mining bitcoin with extra electricity the airplanes generate.

i will try this soon.

I know you want to aim for efficiency. When Autotune is fully working there should be some easier gains achievable with the T17 and S17. Right now you can do manual chip tuning but that takes a long time if you have many machines. Right now it is best to just set fixed frequency per board and voltage. If you have lots of time on you hand do the manual chip tuning too but that can be a very lengthy process since every tweak the machine must restart. Auto tuneshould be fixed and enabled in a week or so. Also custom profiles will be enabled. I am working on a few to share right now.

[Biffa]

Where did I ask you to pay?

Please keep it on topic. Don't really want the thread going off-topic on the first page. But the Second page I say we talk about mining bitcoin with extra electricity the airplanes generate.

You asked me to pay in the part of your post that I quoted.

Anyway, how is it off topic? Its about this firmware, I quoted what you wrote in the first post.

I just want to know before I install a firmware whether it is free or if I have to pay a fee to use the firmware. That's not unreasonable is it?

Is it free, or is there a 2.8% fee? And if there is a fee how is that fee collected.

[taserz]

It is free to download and install just like it is stated in the main topic. There is a 2.8% fee to use the firmware though. Not sure if that wasn't clear? There is no method to take payment on the site so I am unsure where my wording mislead you.

The 2.8% fee is done via parallel mining you will notice the dev fine mining parallel with really low difficulty.

ps. I was just pulling your leg about going off-topic xD

[Biffa]

Thanks for the clarification.

So free to download, but not free to use. Got it.

[taserz]

Thanks for the clarification.

So free to download, but not free to use. Got it.

Well, it's free to use technically until it mines for itself. I mean hey it's running on a custom driver that took 6 months to make and with the increased profit potential of up to 30% on air-cooling it's a drop in the bucket.

But hey stay tuned for auto-tune to be ironed out and enabled that will net even better for you.

[philipma1957]

so 2.8%

and a t 17 drops to 45 watts a th

so 1900 watts vs  2300 watts

or 400 watts maybe only 300 watts.

lets do so math

7 to 10 kwatts a day on a t17

at

3 cents.   21 to 30 cents
4 cents.   28 to 40 cents
5 cents.   35 to 50 cents
6 cents.   42 to 60 cents
7 cents.   49 to 70 cents
8 cents.   56 to 80 cents
9 cents.   63 to 90 cents
10 cents  70 to 1 dollar

42 th earns 5.90 a day.  3 percent fee is 18 cents.

i rounded a lot. but it appears the under volt is good for anyone with four cent power and above.

not going into hot room issues being solved etc.

as a miner

i would suggest. the fee drops to 2% from 2.8 % in 120 days  .

and from 2 % to 1.5% in 240 days time.

but developers have their own ideas 💡 of how to market gear or software.

my power deal is 1/2 the coins this will help my hoster when the 1/2 ing time comes.

[taserz]

I agree. I am going to fight for a lower fee around the halvening but there are more people involved in this than just me.

Phil Don't quote me but I am pretty sure the 45w/th was obtained with the autotune version which the current version has that disabled until some bugs are worked out.

I think a nice benefit of the downvolt is having the miner for the long haul and being in the green for as long as possible.

[philipma1957]

yeah i mentioned i did lots of rounding the goal was not to be exact be to give an idea 💡 of possible savings

i would say anyone in the 4,5,6 cent range with lots of t17s could consider try you out.

obviously 7 cent or higher is a no brainer.

2 or 3 cent guys do not need to rush in.

still gives you a large customer base to draw on.

if you want to attract a three cent guy you need to have a lower fee.

all quick down and dirty math in my head and on my fingers and twos.

I will ask does this work for t17e?

[taserz]

I want to say no because if memory is correct t17e has more chips than base t17.

[philipma1957]

I have a t17 up in clifton
I have a lot of s17 pro
I have 2 s17 in clifton

I finally setup team viewer.

I think I will try to do a remote load  of your software.

[taserz]

It's definitely nice to have a machine you can remote to monitor everything if you don't have a vpn configured out there. I just got the news that 1-2 weeks autotune should be ironed out for both S17 and T17 models.

[philipma1957]

I have two internet services going into the warehouse.  So I can setup a small farm of just t17's and s17's use your firmware on a remote setup.  Keep the bigger farm on the other network.

[taserz]

My recommendation, for now, is to aim for no more than 725mhz on the S17 and not to go beyond 19.6 volts until more results come in. But at 700-725mhz and 19-19.2 you should be achieving 65-70th/s. Which is a fairly good performance gain as it is. If there is one thing I learned a stable overclock is better than a powerful overclock. When auto tune is out I would say play a bit higher but for now I suggest everyone plays it safe.

[micairvas]

T17/S17 fw specs looks great. I will try this in next few days.
Is there any chance to make some good custom firmware for T15/S15 units?

[sergw]

what about s9k / s9se fw?

[Kalyst69]

My recommendation, for now, is to aim for no more than 725mhz on the S17 and not to go beyond 19.6 volts until more results come in. But at 700-725mhz and 19-19.2 you should be achieving 65-70th/s. Which is a fairly good performance gain as it is. If there is one thing I learned a stable overclock is better than a powerful overclock. When auto tune is out I would say play a bit higher but for now I suggest everyone plays it safe.

850MHz @ 19,7v I'm at 82TH
900MHz @ 19,8v I'm at 87TH

both with 0,0001%HW
Not all ASICs will support those settings (silicon lottery), need to fine tune each of your ASIC step by step. It takes times but it's the only way to optimise your hash rate

what about s9k / s9se fw?

Big headache these models. Not sure we will see one that works correctly without any risks soon.