taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 01:45:52 PM Last edit: December 12, 2019, 10:39:20 AM by frodocooper |
|
850MHz @ 19,7v I'm at 82TH 900MHz @ 19,8v I'm at 87TH
both with 0,0001%HW Not all ASICs will support those settings (silicon lottery), need to fine tune each of your ASIC step by step. It takes times but it's the only way to optimise your hash rate
Hey what temps are you getting? Did you set a temp cut off to shut down. Maybe you won the silcon lotttery! 725MHZ @ 19.4-19.6 doing 70th/s what about s9k / s9se fw?
In the works but not too sure if it is going to be worth for most unless cheap power.
|
|
|
|
favebook
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 02:55:51 PM |
|
I see that your firmware is available for S17 Pro, however I have not seen any results. Have you tested this? Also, are there any firmware plans for S17e and T17e?
|
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 03:18:19 PM Last edit: December 12, 2019, 10:39:58 AM by frodocooper Merited by philipma1957 (2) |
|
I see that your firmware is available for S17 Pro, however I have not seen any results. Have you tested this? Also, are there any firmware plans for S17e and T17e?
Did you click the link? I have photos of them running at 70th and 85th/s on the website. Here is a random picture of one S17pro machine right now. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FIsQFZxP.png&t=665&c=j6617AR11cR7xA) It does not work on S17E or T17e. That is a different miner with more chips than S17/S17Pro/T17. We are working on S17e and T17e firmware but not ready yet first getting auto tune working again.
|
|
|
|
favebook
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 04:39:25 PM |
|
Yeah, I missed that photo. Thanks for answer!
Please notify me as soon as T17e and S17e firmwares are ready.
Also, is there a firmware without dev fee?
|
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 08:54:20 PM |
|
Yeah, I missed that photo. Thanks for answer!
Please notify me as soon as T17e and S17e firmwares are ready.
Also, is there a firmware without dev fee?
Nope, it took many months to get the driver made for the 17 series. Creates an incentive to keep working on the project and develope firmware for other machines. People gotta eat! Edit: not edit button I'm dumb 400mhz at 16 seems pretty promising for a downvolt/downclocl. Going to hook a meter up to it but been stable for the past 5 hours.
|
|
|
|
favebook
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 09:42:48 PM Last edit: December 12, 2019, 10:40:42 AM by frodocooper |
|
I understand how much time it can take and that it is a lot of work. I did not mean to ask for a free firmware. I meant to ask if there are any paid ones which I can buy so I can get it without dev fee.
|
|
|
|
devindeysel
Copper Member
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 77
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 09:57:41 PM |
|
how many hours you run already?
There is any side effects?
|
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 11, 2019, 10:10:25 PM Last edit: December 12, 2019, 10:41:13 AM by frodocooper |
|
I understand how much time it can take and that it is a lot of work. I did not mean to ask for a free firmware. I meant to ask if there are any paid ones which I can buy so I can get it without dev fee.
Let me ask I know at one point that was offered but I do not recall the price or how that goes about. how many hours you run already?
There is any side effects?
Sorry for the late responses haven't been checking as much as I like as I have been sitting in a dump truck for the past 2 days pretty much and I didn't bring an inverter for my laptop so I am flipping it on every once in a while to check thread and vpn to the machine for tweaking. But I mean hey if my contract I bid on is for the hour... I can't complain. Currently watching snow still fall. The only side effect I can say right now is you will be messing with your miner a lot if you are like me. No side effects right now the settings that were not working have been disabled so there are very few bugs.
|
|
|
|
Kalyst69
Jr. Member
Offline
Activity: 147
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2019, 03:34:58 AM Last edit: December 12, 2019, 10:42:05 AM by frodocooper |
|
Hey what temps are you getting? Did you set a temp cut off to shut down. Maybe you won the silcon lotttery!
725MHZ @ 19.4-19.6 doing 70th/s
Max chip temp is 85-90 Better than silicon lottery, my farm is based in Siberia. Good free cooling helps a lot. I think that in the next two months we will be able to push at 90TH with new firmware evolution.
|
Host your ASICs in Siberia for $0.07/KW all inclusive. Contact me for information.
|
|
|
micairvas
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2019, 07:00:05 AM Last edit: December 12, 2019, 07:11:53 AM by micairvas |
|
Can you post some pics of your achievement ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) ? Anyone found some sweet spot for T17 on low power consumption? I tested a little bit yesterday, got 42 ths/1950w.
|
|
|
|
yrk1957
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 531
Merit: 29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2019, 07:49:36 AM |
|
How accurate is the built-in wattmeter? Any screen shots of that?
|
|
|
|
Kalyst69
Jr. Member
Offline
Activity: 147
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2019, 10:52:18 AM Last edit: December 12, 2019, 11:01:52 AM by frodocooper |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Fx7khyqF.png&t=665&c=6Hz9GDLdneaA7Q) Here is 82TH achievement with low temp and very low HW.
|
Host your ASICs in Siberia for $0.07/KW all inclusive. Contact me for information.
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2019, 04:26:22 PM Last edit: December 13, 2019, 11:41:51 AM by frodocooper Merited by philipma1957 (2) |
|
Max chip temp is 85-90 Better than silicon lottery, my farm is based in Siberia. Good free cooling helps a lot. I think that in the next two months we will be able to push at 90TH with new firmware evolution.
I was going to say I was hitting the thermal throttling threshold at 65-70f with those settings. You with your nice power and electricity rates!
Just got S17 down to 30w/th @ 39th/s which is 16% efficiency gains over low power mode on stock firmware. I can get more I just started trying to see what the results were going to net in this range. This was also taken before PDU, and before PSU, so probably a bit lower but lose some % going through cable and pdu. The measurement is taken at the breaker panel. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FBHBSDAi.png&t=665&c=KGe0fvoL5Mj9YQ)
|
|
|
|
ardeverb
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 13, 2019, 12:54:12 PM |
|
Hello,
Is there in your firmware any difference from the bixbit firmware that is available? They ask an 3% developer fee and can also overcloch and undervolt the machines. For example can you tune the chips seperately in bitmain S17 pro? What settings did you use to to get the s17 to 30w/th ? Thanks for your answer.
|
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 13, 2019, 06:15:34 PM Last edit: December 14, 2019, 10:35:59 AM by frodocooper |
|
16v and around 400mhz +- 25. We are the official distributor for this firmware for English speaking clients. There are other rebranded versions for Russian and other customers. If English is your native language your best bet is to go through me for any support, questions, help, and etc. I am not sure if bixbit is the same.
|
|
|
|
Thetaj
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2019, 02:29:25 AM |
|
When the autotune comes back can you consider 2% fee? I'll try them on a batch of T17s
|
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2019, 03:04:00 AM |
|
When the autotune comes back can you consider 2% fee? I'll try them on a batch of T17s
I don't control the fee. I am assuming it will lower around the time of halving. Autotune just makes it more profitable. Lower power and increased hashrate.
|
|
|
|
ardeverb
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2019, 09:14:20 PM |
|
After a 10 hours of tuning. I have got around a nice 32,5 watt a TH This is with a working temperature of 8 degrees. Looking forward for auto tuning.
|
|
|
|
taserz (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 800
Merit: 293
Created AutoTune to saved the planet! ~USA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2019, 09:51:17 PM |
|
After a 10 hours of tuning. I have got around a nice 32,5 watt a TH This is with a working temperature of 8 degrees. Looking forward for auto tuning.
Hey ardverb, Can you share those settings that is pretty awesome!
|
|
|
|
rocky2020
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2019, 04:07:50 PM Last edit: December 16, 2019, 01:20:59 AM by frodocooper |
|
Hi Taserz,
I think i did a mistake : i unlocked T17 with your tool, flashed your firmware, but it doesn't start to mine. So, i reflashed with the original firmware. With original firmware it mines correctly. I i wanted to try again your firmware. but there is a problem : i think the firmware i downloaded on bitmain fix the the exploit you used in your tool, i can't access SSH anymore. There is a way to downgrade it ?
|
|
|
|
|