Asic.to Firmware 17Series • Optimized efficiency/Performance •

[algcool]

Sir,

Very glad to read the information about oc the T17/S17 miners in the forum.

I am a miner seller in China, also offer the hosting service. People here really like overclocking the T17/S17 miners.
In China, we have very stable oc firmware for T17(725M-825M),  the status is like below:
    freq         hashrate          powercost          enviromenttemp
  official            40T                2200W                15degree
    725M           43.5T              2386W                15degree
    750M           45.2T              2560W                15degree
    775M           47T                 2688W                15degree
    825M           50T                 2858W                15degree
    850M           50.5T              2934W                15degree
    875M           51.6T              3102W                15degree
   
I have some questions here:
1, Is your oc firmware stable? Would you please give us the freq/hashrate/powercost information like above?
2, Your oc firmare support T17 and S17. Is it support the T17E/S17E/S17pro/S17+?

Thanks a lot!

[1715686268]

1715686268

[1715686268]

1715686268

[1715686268]

1715686268

[taserz]

Hi algcool, can you pm me and send me your email or your telegram I would love to chat with you.

I have to check on the hashrate for T17 as I only know the S17 off the top of my head. The settings you showed me looks like a patched bmminer or a fixed frequency overclock. Ours will outperform those numbers as we do tuning per chip.

1. Yes very stable we are doing our auto-tune beta and it should be out by the end of today. Our current firmware outperforms all other firmware we have seen online. This current update will make it far easier to use for big farms.
2. It supports S17/S17pro/T17. For the S17E/T17E/S17+/T17+ we will have a beta firmware ready for it in about a week. (it is already working we just need to package it up and fix a few things)

I look forward to hearing back from you.


AUTO TUNE UPDATE IS LIVE!

https://asic.to/files/Firmware/S17/Antminer-S17-0.9.8.tar.gz

https://asic.to/files/Firmware/T17/Antminer-T17-0.9.8.tar.gz

New release, 0.9.8_beta for Antminer S17 & T17 models

What is done:
1. General stability
2. Extended and refactored the main driver.
3. The next iteration of refinement and improvement of errors (HW)
4. Hash rate loss on some pools was analyzed and fixed.
5. Added support for P2P pool.
6. Activated the multiplier for the distribution of mass batch configs.
7. Work on with the reading of temperature sensors I2C
8. Created more than 10 overclocking profiles.
9. Added autotune!!! (note, autotune results are saved in a separate config, when changing a profile to a new one and returning to the previous profile, a repeated autotune is not required, except for a forced retune by the user).
After the completion of the tune, “temporarily” changes to the chips in the manual section of gui are not displayed.
10. Autotune is taken out as a separate log in the profiles section.
11. Automatic reboot when unbalancing domains to save chips from burnout.
12. Added manual downgrade of the entire domain.

[Ripster]

Good morning Taserz, thank you for the autotune, im trying one of your profiles and all im getting is this error

https://ibb.co/TvrgY23

its rebooted like 10-15 times, will it correct it self or whats it doing? any suggestions would be greatly appreciated

[taserz]

Good morning Taserz, thank you for the autotune, im trying one of your profiles and all im getting is this error

https://ibb.co/TvrgY23

its rebooted like 10-15 times, will it correct it self or whats it doing? any suggestions would be greatly appreciated

If you choose a preset it will auoto tune for over an hours while it sorts itself out. If you go to minerprofiles page on the bottom right it will give you the details on the Autotune and what round it is on. Every time it gets faster or draws less power until chips are stable. My S17 for example at 70th lasted 9 rounds of auto tuning

[Ripster]

So that "Failed to verify avg chain voltage" and "failed to set working voltage" is normal, because in the profile page it says error and just trys again

[taserz]

So that "Failed to verify avg chain voltage" and "failed to set working voltage" is normal, because in the profile page it says error and just trys again

We are pushing out .98 beta too very soon I should have it posted by the end of the night. We found some users were having issues and auto-tune was going on for a long time. I am assuming that is what is happening for you.

[rocky2020]

i expected a lot with this new version with auto-tuing...and finally what a big deception...
impossible to get over 45/48 Ths with a T17, after, its overheating...the air is 7°, so very cold to the machine, but its not enough.
this firmware seems useless for overclocking with air cooling.

[favebook]

i expected a lot with this new version with auto-tuing...and finally what a big deception...
impossible to get over 45/48 Ths with a T17, after, its overheating...the air is 7°, so very cold to the machine, but its not enough.
this firmware seems useless for overclocking with air cooling.

That probably means you lost silicon lottery... Otherwise, trying manually configuring Frequency and Voltage.

[taserz]

Yeah I was about to say the same most people can throw 48th/s at a T17 without a problem.

[philipma1957]

i expected a lot with this new version with auto-tuing...and finally what a big deception...
impossible to get over 45/48 Ths with a T17, after, its overheating...the air is 7°, so very cold to the machine, but its not enough.
this firmware seems useless for overclocking with air cooling.

well you are very lucky most likely you will have an exceptional down clocking unit.

it will come in handy during the 1/2 ing.

please humor me and attempt to lower voltage.

your savings may be in power.

i have overclocked gear.
i have run gear with low volts same hash
i have run gear with low volts and lower hash.

No gear super overclocks and super down clocks.

some over clock really well
some down clock really well

some over clock okay
and down clock okay.


some suck at over clock
and are okay at down clock.

i am hoping yours is a down-⏰  monster.

let us know how it down clocks.

[Ripster]

Would it be possible for some people to post on what results there getting? Even with the new auto-tune update i keep getting the voltage error as seen on my earlier post, ive let it got for 4-5 hours, same thing, never hashes at all, with bitmain's firmware its flawless at 42TH

https://imgur.com/kVT1ghU

im at 16.8-17.2 amps for a pair of T17's, If im correct that 2050 watts per miner or 49 watts per TH

any help is always appreciated

[taserz]

Would it be possible for some people to post on what results there getting? Even with the new auto-tune update i keep getting the voltage error as seen on my earlier post, ive let it got for 4-5 hours, same thing, never hashes at all, with bitmain's firmware its flawless at 42TH

https://imgur.com/kVT1ghU

im at 16.8-17.2 amps for a pair of T17's, If im correct that 2050 watts per miner or 49 watts per TH

any help is always appreciated

What does the autotune log say under mining profile? Same for the kernel log? I wonder if it has a chip that is unstable at voltage and it keeps trying to adjust. Try a slightly faster preset so it increases base voltage a little bit. Did you have this issue with the .96 beta or only the latest .98 autotune beta?

[Ripster]

same issue on both versions, Correct says same thing as kernel log, Error failed to set voltage, then says starting autotune, finding voltage then again error failed to set voltage.

ive tried 3 of your profile settings, all with the same result, it wont hash at all with your firmware, with bitmains firmware its perfect, however the chains do have a discrepancy which i think you firmware dosent like

https://imgur.com/IocLzA6

As you can see Chain 1 is always about 0.5 volts higher then the other ones, on my other t17 there within 0.1 volts of each other, and that one has no issues with your firmware

But clearly the chain is perfectly functional because its rock solid at 41-42 th on bitmains firmware

[taserz]

same issue on both versions, Correct says same thing as kernel log, Error failed to set voltage, then says starting autotune, finding voltage then again error failed to set voltage.

ive tried 3 of your profile settings, all with the same result, it wont hash at all with your firmware, with bitmains firmware its perfect, however the chains do have a discrepancy which i think you firmware dosent like

https://imgur.com/IocLzA6

As you can see Chain 1 is always about 0.5 volts higher then the other ones, on my other t17 there within 0.1 volts of each other, and that one has no issues with your firmware

But clearly the chain is perfectly functional because its rock solid at 41-42 th on bitmains firmware

So we worked on a new version that should fix your issue. This new update it is supposed to fix the machines that also failed to autotune. So far it's fixed every autotune issue we have seen.

 Changes:
 1) The autotune work has been finalized and fully adjusted.
 2) Completely rewritten algorithm for adjusting the voltage of the chips.
 3) Improved method for controlling unbalanced domains.
 4) Adjusted and fully customized profiles.
 5) Added compatibility with BTC Tools version 1.2.6.
 6) Fixed config multiplier with batch propagating workers.
 7) Added pool support for nicehash.com.
  Added pool support for warphash.com.
 9) Checked and fixed stability of the emcd.io pool

https://asic.to/files/Firmware/S17/Antminer-S17-0.9.9-beta.tar.gz

https://asic.to/files/Firmware/T17/Antminer-T17-0.9.9-beta.tar.gz

You and a few others were having issues with voltage and frequency tuning and this should fix it.

Also, I suggest powering down your machine for a few minutes and powering back up to drain power in the machines if it fails to drop power voltage.

If this update doesn't fix it please click download button in kernel log and upload so I can read the kernel log to see what is causing the issue

[taserz]

I don't want to make a misleading title on this thread but...

Can I advertise it as 102+th/s firmware mod now  



While we are at it take a look at the 80x club

[Ripster]

Holy Moly, is that a S17 or T17 your getting over 100 TH thats awesome.

As for my problem, seems to be solved with that latest release, the auto-tuning is currently on round 4, everything looks good, id expect that to be tuning for a couple hours, however it does hash in-between rounds. Thank you very much

[favebook]

Holy Moly, is that a S17 or T17 your getting over 100 TH thats awesome.

As for my problem, seems to be solved with that latest release, the auto-tuning is currently on round 4, everything looks good, id expect that to be tuning for a couple hours, however it does hash in-between rounds. Thank you very much

I'd bet it is S17+  

I don't want to make a misleading title on this thread but...

Can I advertise it as 102+th/s firmware mod now  

https://asic.to/files/Photos/100th.jpg

While we are at it take a look at the 80x club

https://asic.to/files/Photos/80%20club.jpg

I wouldn't mind, but if it is in emerged oil or in -20C, then it might be misleading.

[Dodgymon]

The bigger question is what are you doing on viabtc? I assume your mining btrash or her ugly sister?

P.S. I love the new FW BTW good job!

[taserz]

I'd bet it is S17+  

S17 non pro

I wouldn't mind, but if it is in emerged oil or in -20C, then it might be misleading.

Air-cooled -30 or -35C if memory is correct.

The bigger question is what are you doing on viabtc? I assume your mining btrash or her ugly sister?

P.S. I love the new FW BTW good job!

Jajajajajaj xaxaxaxa hahahahaha. Got to make sure it works with all the pools!

Granted we are aware we just broke functionality with .9.9 update on Bitcoin.com and NiceHash. Next update will fix that.

[favebook]

S17 non pro

HOLY HELL!  

Air-cooled -30 or -35C if memory is correct.

Might be misleading, but it would attract some people. However, if you do put it, I'd put asterisk and explain conditions required for such speed.