NAS :: Descendant of NXT 100% PoS|More Exchanges|WinNAS is ready!

[tyz]

You mean DGEX is still hodling a huge amount of NAS from the time before Qora disappered and appeared again? So, if the coins from there will be transferable again, it will have a big sell preasure 

What about dgex?
It holds lot of NAS.

[powerfull]

Why do you think that the network isn't strong enough to continue updating NAS?  Anyone who's running a node is either not watching this thread and still forked from the attack and going no where, or are watching this thread and will know that a new version will be coming out and will update.

If Bter hasn't fixed their node, it might be easier (less work) for them to just download the new client and download the chain cleanly from the network again.  Otherwise they'll be wiping the client, downloading the data, bringing their node offline when the new version comes out, possibly download the chain again, etc.

There are some major bugs that are fixed with newer versions of the NXT client.  I don't think that stopping the NAS patching at 1.1.6 leaving the rest of the bugs in place due to the fear of nodes not updating is a wise decision.

Well, maybe you are right. But the attack that we suffered was not because a bug, and we lost the only exchange that was available, Bter: "NAS deposit is disabled 因技术维护，虚拟币充值暂停，感谢您谅解和支持。"

If we are going to update further, we need to decide and agree on a block height at which the new features will start working. After that, the current clients will not work. The WinNAS client will also not work with greater version updates (I know, nobody is using it, but it works   )

I would like to read more opinions, in favor or against. Do you, people, want NAS to be a full updated clone of NXT?, would it be an incentive for new users and exchanges?, are there any other ideas for the evolution of Nas?.

sorry and sad to find all exchange platform's deposit doesnt work, i think its first step to make nas alive and agree by all exchange platform.

[powerfull]

Why do you think that the network isn't strong enough to continue updating NAS?  Anyone who's running a node is either not watching this thread and still forked from the attack and going no where, or are watching this thread and will know that a new version will be coming out and will update.

If Bter hasn't fixed their node, it might be easier (less work) for them to just download the new client and download the chain cleanly from the network again.  Otherwise they'll be wiping the client, downloading the data, bringing their node offline when the new version comes out, possibly download the chain again, etc.

There are some major bugs that are fixed with newer versions of the NXT client.  I don't think that stopping the NAS patching at 1.1.6 leaving the rest of the bugs in place due to the fear of nodes not updating is a wise decision.

Well, maybe you are right. But the attack that we suffered was not because a bug, and we lost the only exchange that was available, Bter: "NAS deposit is disabled 因技术维护，虚拟币充值暂停，感谢您谅解和支持。"

If we are going to update further, we need to decide and agree on a block height at which the new features will start working. After that, the current clients will not work. The WinNAS client will also not work with greater version updates (I know, nobody is using it, but it works   )

I would like to read more opinions, in favor or against. Do you, people, want NAS to be a full updated clone of NXT?, would it be an incentive for new users and exchanges?, are there any other ideas for the evolution of Nas?.

sorry and sad to find all exchange platform's deposit doesnt work, i think its first step to make nas alive and agree by all exchange platform.

dev , hope to rebuild up blockexplorer and let it work , thats the first step .. i think maybe you dont wanna nas dead ,right. thank you

[lcharles123]

I try both 1.1.6 and 1.1.3 but get a error:

Code:

Error: Could not find or load main class nxt.Nxt

The java is version 1.8.0_45
This can be a problem with these new versions of java?  Which version are you running?

[yanhongcheng901011]

this coin is Resurrection??

[powerfull]

anyone can set up block chain explore now

[MadCow]

is NAS on any exchanges now?

[patapato]

I try both 1.1.6 and 1.1.3 but get a error:

Code:

Error: Could not find or load main class nxt.Nxt

The java is version 1.8.0_45
This can be a problem with these new versions of java?  Which version are you running?

Are you using the sources or the zip file?, Linux or Windows?,
Maybe it's a problem of directory or files permission in Linux, as distribution file is zipped in Windows.
That Java version is not the problem.

[lcharles123]

I try both 1.1.6 and 1.1.3 but get a error:

Code:

Error: Could not find or load main class nxt.Nxt

The java is version 1.8.0_45
This can be a problem with these new versions of java?  Which version are you running?

Are you using the sources or the zip file?, Linux or Windows?,
Maybe it's a problem of directory or files permission in Linux, as distribution file is zipped in Windows.
That Java version is not the problem.

I use the .zip files.
The previous version in OP works, the system is Mint17 and SUSE13, both x64

[User1397367406]

I try both 1.1.6 and 1.1.3 but get a error:

Code:

Error: Could not find or load main class nxt.Nxt

The java is version 1.8.0_45
This can be a problem with these new versions of java?  Which version are you running?

Are you using the sources or the zip file?, Linux or Windows?,
Maybe it's a problem of directory or files permission in Linux, as distribution file is zipped in Windows.
That Java version is not the problem.

I use the .zip files.
The previous version in OP works, the system is Mint17 and SUSE13, both x64

I think the problem is the default java version used.
I have/had the same problem here on Ubuntu and i have several Java versions installed: 6,7 and 8 (6 and 7 are OpenJDK, 8 is Oracle)
Might be a problem with OpenJDK, not sure if Java 8 is required or an Oracle Java is required(patapato might know more about it).
What i think is that both 1.1.6.N1 and 1.1.3.N2 require Java 8.

Here is what i get in the terminal:

Code:

java -version

I get:

Code:

java version "1.7.0_79"
OpenJDK Runtime Environment (IcedTea 2.5.5) (7u79-2.5.5-0ubuntu0.12.04.1)
OpenJDK 64-Bit Server VM (build 24.79-b02, mixed mode)

Using this version(./run.sh in terminal in nas folder) i get:

Code:

Error: Could not find or load main class nxt.Nxt

Using java 8, located here in "/usr/lib/jvm/java-8-oracle/jre/bin/java" it works fine:

Code:

/usr/lib/jvm/java-8-oracle/jre/bin/java -version

I get:

Code:

java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)

Launching it with the following command:

Code:

/usr/lib/jvm/java-8-oracle/jre/bin/java -cp nxt.jar:lib/*:conf nxt.Nxt

On Ubuntu(might work on Mint and Suse) i can get the installed Java version with the following:

Code:

update-alternatives --list java

I get:

Code:

/usr/bin/gij-4.6
/usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java
/usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java
/usr/lib/jvm/java-8-oracle/jre/bin/java

You can change the default Java using:

Code:

update-alternatives --config java

I get:

Code:

There are 4 choices for the alternative java (providing /usr/bin/java).

  Selection    Path                                            Priority   Status
------------------------------------------------------------
  0            /usr/lib/jvm/java-8-oracle/jre/bin/java          1062      auto mode
  1            /usr/bin/gij-4.6                                 1046      manual mode
  2            /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java   1061      manual mode
* 3            /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java   1051      manual mode
  4            /usr/lib/jvm/java-8-oracle/jre/bin/java          1062      manual mode

Press enter to keep the current choice[*], or type selection number: 

Hope this helps.

[User1397367406]

@patapato

While i'm at it, there are a few little things wrong in the shell script "*.sh" files for Linux:

- Line endings: the line ending in the script files is "CR LF"(\r\n)[windows line ending] and should be only "LF"(\n)[*nix line ending]

- compile.sh needs also changes, here is what i'm using(should match win-compile.sh):

Code:

CP=conf/:classes/:lib/*
SP=src/java/

/bin/mkdir -p classes/

javac -sourcepath ${SP} -classpath ${CP} -d classes/ src/java/nxt/*.java src/java/nxt/*/*.java || exit 1

/bin/rm -f nxt.jar 
jar cf nxt.jar -C classes . || exit 1
/bin/rm -rf classes

echo "nxt.jar generated successfully"

[lcharles123]

I try both 1.1.6 and 1.1.3 but get a error:

Code:

Error: Could not find or load main class nxt.Nxt

The java is version 1.8.0_45
This can be a problem with these new versions of java?  Which version are you running?

Are you using the sources or the zip file?, Linux or Windows?,
Maybe it's a problem of directory or files permission in Linux, as distribution file is zipped in Windows.
That Java version is not the problem.

I use the .zip files.
The previous version in OP works, the system is Mint17 and SUSE13, both x64

. .
Launching it with the following command:

Code:

/usr/lib/jvm/java-8-oracle/jre/bin/java -cp nxt.jar:lib/*:conf nxt.Nxt

. .
Hope this helps.

Thanks! It works!

I have installed in /opt
So just run through

Code:

/opt/jdk1.8.0_45/bin/java -cp nxt.jar:lib/*:conf nxt.Nxt

Node running!!

[michaelsss]

anyone can set up block chain explore now

 Block explorers is necessary

[nightwishx]

My coins in poloniex..

[zhangli]

 Block explorers

[Kozan]

I dounloaded Winnas client from here:
https://www.dropbox.com/s/4n1jah73agicnbo/WinNASv0.2.2beta_full.zip
Winnas didn't work, I opened the web wallet from the same winnas folder and it worked for me. Is it the right blockchain?
I see peers:
 funkyvps3.funkymonkey.org   27'019   474 B   169 B   NRS 1.1.3.N1   VPS
 99.227.137.145   0   78 B   115 B   NRS 1.1.6.N1   PC
 patapato.ddns.net   3'977'929   165 KB   29 KB   NRS 1.1.6.N1   Win7-64b

[patapato]

@patapato

While i'm at it, there are a few little things wrong in the shell script "*.sh" files for Linux:

- Line endings: the line ending in the script files is "CR LF"(\r\n)[windows line ending] and should be only "LF"(\n)[*nix line ending]

- compile.sh needs also changes, here is what i'm using(should match win-compile.sh):

Code:

CP=conf/:classes/:lib/*
SP=src/java/

/bin/mkdir -p classes/

javac -sourcepath ${SP} -classpath ${CP} -d classes/ src/java/nxt/*.java src/java/nxt/*/*.java || exit 1

/bin/rm -f nxt.jar 
jar cf nxt.jar -C classes . || exit 1
/bin/rm -rf classes

echo "nxt.jar generated successfully"

Hi User1397367406, I would like to give you write access to the Bitbucket repository (except "master branch"), I already gave access to tiker. Then you could do those changes and upload a correct zip file made in Linux, deleting the current one.

I tried to compile with Java version 7 compatibility from the IDE, but I forgot it at the end as I compiled with the script, which used my most recent version of Java.

Line ending should be correct in the sources, as Git makes the conversion when commiting. The other change that you write is enclosing the variables 'SP' and 'CP' between brackets. If it is necessary I would make an "amend commit" in order that it will be correct in the sources as well. 'win-compile' is slightly different in that it needs quotation marks in 'CP' value.

[Kozan]

My coins in poloniex..

Please, write them, open the ticket! I wrote today, maybe together we can persuade them to do something!

[Kozan]

I got email from Graviton, dgex.com.
He thinks that NAS is dead and that's why it is not traded on dgex. Maybe you could get in touch with him and suggest the proper client?

[michaelsss]

I got email from Graviton, dgex.com.
He thinks that NAS is dead and that's why it is not traded on dgex. Maybe you could get in touch with him and suggest the proper client?

that means over 1000M coins missed ,good news or bad news ?
 
yes ,i have over 10Mcoins be in dgex ,but now ,everythings over, let it go...