PietCoin97
Jr. Member
Offline
Activity: 91
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 04:06:03 AM |
|
Try merge your safe files or make a secound run from beginning and then merge
|
|
|
|
Jean_Luc (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 04:26:49 AM |
|
My server is secure. I also checked the logs and I don't have any unknown IPs. Everyone else has a problem, so that's not the problem.
I don't think the problem come from the network. When you restart the server, all 92 clients reconnect well, the server works a bit and crashes. I will make further tests and try to reproduce the issue. [DP COUNT 2^27.60 / 2^27.55] - I don't understand again ... (?)
Yes as said above, it is an estimation and this estimation does not take in consideration the overhead of the DP method which is linked to the total number of kangaroo. The server does not know how many kangaroos are working. And if you restart all clients, then it is like multiplying the number of kangaroo by 2 and stop the half of kangaroo which creates an overhead. I will also add the support of -ws for clients.
|
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 04:46:02 AM |
|
My server is secure. I also checked the logs and I don't have any unknown IPs. Everyone else has a problem, so that's not the problem.
I don't think the problem come from the network. When you restart the server, all 92 clients reconnect well, the server works a bit and crashes. I will make further tests and try to reproduce the issue. [DP COUNT 2^27.60 / 2^27.55] - I don't understand again ... (?)
Yes as said above, it is an estimation and this estimation does not take in consideration the overhead of the DP method which is linked to the total number of kangaroo. The server does not know how many kangaroos are working. And if you restart all clients, then it is like multiplying the number of kangaroo by 2 and stop the half of kangaroo which creates an overhead. I will also add the support of -ws for clients. OKAY. Many thanks for fast release version with improvements
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
Etar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 06:33:28 AM Last edit: May 25, 2020, 06:44:10 AM by Etar |
|
This is my server/client app. https://drive.google.com/open?id=1pnMcVPEV8b-cJszBiQKcZ6_AHIScgUO8Both app work only on Windows x64! In the archive, there are both compiled files, source codes and example .bat files. So you can compile the executable yourself or use the ready-made one. It is example of bat file to start server: REM puzzle #110(109bit)
SET dpsize=31 SET wi=7200 SET beginrange=2000000000000000000000000000 SET endrange=3fffffffffffffffffffffffffff SET pub=0309976ba5570966bf889196b7fdf5a0f9a1e9ab340556ec29f8bb60599616167d SET workfile=savework serverapp.exe -workfile %workfile% -dp %dpsize% -wi %wi% -beginrange %beginrange% -endrange %endrange% -pub %pub% pause
-workfile - it is filename of your masterfile, where merged all clients job -wi - this is job saving interval for client, 7200 mean the client will save his job every 2h and send to server, do not setup this value to small, the client must have time to send work before a new one appears. Note! if you will use already existed masterfile, use only copy of masterfile and original masterfile save to safe place!!!It is example of bat file to start client: clientapp.exe -name rig1 -pool 127.0.0.1:8000 -t 0 -gpu -gpuId 0 pause
-name - this is name of your rig, just for stats -pool - server address:port -gpuId - set dependency how many GPU you have on rig (-gpuId 0,1,2,3 ex for 4gpu) Note! Before use app, make sure that you have good enternet bandwidth, because client will send BIG files(which also have kangaroo)!When client connect first time he get job params form server(dpsize,wi,beginrange,endrange,pub) You can see downloaded params in clentapp console. After client send his job to server, server merge this job to masterfile and check collision during merge. If server or client solve key, server app will create log file where will be dump of private key(the same as in server concole) There possible to get telegramm notification when key solved, but i don`t think that is need. Try server and client app on a small range to make sure you're doing everything right.
|
|
|
|
WanderingPhilospher
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Online
Activity: 1148
Merit: 236
Shooters Shoot...
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 07:27:41 AM |
|
This is my server/client app. https://drive.google.com/open?id=1pnMcVPEV8b-cJszBiQKcZ6_AHIScgUO8Both app work only on Windows x64! In the archive, there are both compiled files, source codes and example .bat files. So you can compile the executable yourself or use the ready-made one. It is example of bat file to start server: REM puzzle #110(109bit)
SET dpsize=31 SET wi=7200 SET beginrange=2000000000000000000000000000 SET endrange=3fffffffffffffffffffffffffff SET pub=0309976ba5570966bf889196b7fdf5a0f9a1e9ab340556ec29f8bb60599616167d SET workfile=savework serverapp.exe -workfile %workfile% -dp %dpsize% -wi %wi% -beginrange %beginrange% -endrange %endrange% -pub %pub% pause
-workfile - it is filename of your masterfile, where merged all clients job -wi - this is job saving interval for client, 7200 mean the client will save his job every 2h and send to server, do not setup this value to small, the client must have time to send work before a new one appears. Note! if you will use already existed masterfile, use only copy of masterfile and original masterfile save to safe place!!!It is example of bat file to start client: clientapp.exe -name rig1 -pool 127.0.0.1:8000 -t 0 -gpu -gpuId 0 pause
-name - this is name of your rig, just for stats -pool - server address:port -gpuId - set dependency how many GPU you have on rig (-gpuId 0,1,2,3 ex for 4gpu) Note! Before use app, make sure that you have good enternet bandwidth, because client will send BIG files(which also have kangaroo)!When client connect first time he get job params form server(dpsize,wi,beginrange,endrange,pub) You can see downloaded params in clentapp console. After client send his job to server, server merge this job to masterfile and check collision during merge. If server or client solve key, server app will create log file where will be dump of private key(the same as in server concole) There possible to get telegramm notification when key solved, but i don`t think that is need. Try server and client app on a small range to make sure you're doing everything right.Looks awesome! Can one also add in gridsize with the -g option on client side?
|
|
|
|
Etar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 07:33:54 AM Last edit: May 25, 2020, 07:46:55 AM by Etar |
|
-snip-
Looks awesome! Can one also add in gridsize with the -g option on client side?
all params that you are using with kangaroo.exe can be used in clientapp like -g and so on Client app send all this params to kangaroo.exe and launch kangaroo.exe like child process. Only -d,-w,-wi,-ws,-wt and input file is set by server, all other you can set as you wish. i use this bat to my local rtx: clientapp.exe -name 1x2080ti -pool 127.0.0.1:8000 -t 0 -g 136,256 -gpu -gpuId 0
|
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 07:52:00 AM |
|
This is my server/client app. https://drive.google.com/open?id=1pnMcVPEV8b-cJszBiQKcZ6_AHIScgUO8Both app work only on Windows x64! In the archive, there are both compiled files, source codes and example .bat files. So you can compile the executable yourself or use the ready-made one. It is example of bat file to start server: REM puzzle #110(109bit)
SET dpsize=31 SET wi=7200 SET beginrange=2000000000000000000000000000 SET endrange=3fffffffffffffffffffffffffff SET pub=0309976ba5570966bf889196b7fdf5a0f9a1e9ab340556ec29f8bb60599616167d SET workfile=savework serverapp.exe -workfile %workfile% -dp %dpsize% -wi %wi% -beginrange %beginrange% -endrange %endrange% -pub %pub% pause
-workfile - it is filename of your masterfile, where merged all clients job -wi - this is job saving interval for client, 7200 mean the client will save his job every 2h and send to server, do not setup this value to small, the client must have time to send work before a new one appears. Note! if you will use already existed masterfile, use only copy of masterfile and original masterfile save to safe place!!!It is example of bat file to start client: clientapp.exe -name rig1 -pool 127.0.0.1:8000 -t 0 -gpu -gpuId 0 pause
-name - this is name of your rig, just for stats -pool - server address:port -gpuId - set dependency how many GPU you have on rig (-gpuId 0,1,2,3 ex for 4gpu) Note! Before use app, make sure that you have good enternet bandwidth, because client will send BIG files(which also have kangaroo)!When client connect first time he get job params form server(dpsize,wi,beginrange,endrange,pub) You can see downloaded params in clentapp console. After client send his job to server, server merge this job to masterfile and check collision during merge. If server or client solve key, server app will create log file where will be dump of private key(the same as in server concole) There possible to get telegramm notification when key solved, but i don`t think that is need. Try server and client app on a small range to make sure you're doing everything right.Looks awesome! Can one also add in gridsize with the -g option on client side? Thank you very much! I appreciate the help! Should I understand that this requires new clients to be started? At this time, it probably won't be the best idea to start a new customer run from the beginning :-)
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
Etar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 08:04:20 AM |
|
-snip- Thank you very much! I appreciate the help! Should I understand that this requires new clients to be started? At this time, it probably won't be the best idea to start a new customer run from the beginning :-)
In your case maybe it is not good idea to use this server because you almost done this job. But if you want, all what you need it is copy your masterfile to serverapp folder, setup in server bat file SET workfile=.... And run clientapp on rig. All new client files will be merged to your masterfile. But I repeat that in your case, perhaps the best solution would be to stay on the built version.
|
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 08:24:58 AM |
|
-snip- Thank you very much! I appreciate the help! Should I understand that this requires new clients to be started? At this time, it probably won't be the best idea to start a new customer run from the beginning :-)
In your case maybe it is not good idea to use this server because you almost done this job. But if you want, all what you need it is copy your masterfile to serverapp folder, setup in server bat file SET workfile=.... And run clientapp on rig. All new client files will be merged to your masterfile. But I repeat that in your case, perhaps the best solution would be to stay on the built version. You're right ... Many thanks for a great job! I will definitely start your version by # 115 ... if I finish # 110 :-) I saw in the code that it supports your info server on Telegram ... Where exactly do I set the channel parameters?
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
Etar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 08:34:13 AM |
|
-snip- You're right ... Many thanks for a great job! I will definitely start your version by # 115 ... if I finish # 110 :-) I saw in the code that it supports your info server on Telegram ... Where exactly do I set the channel parameters?
to get telegramm notification you need have your telegramm bot. if you have telegramm bot you can set params -tgbotid YOURTELEGRAMMBOTID and -tgmyid YOURTELEGRAMMID in that case if server will see this 2 params, he will launch telegramm hook thread. and send you hello message like "Key server started at port:...." to your telegramm account. When the key will solve server send via your telegramm bot message "Key found!!!" The telegram will not send the key itself, for security reasons, but only a message that it is found.
|
|
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 11:46:31 AM |
|
Did not work. At startup, errors appear missing files ucrtbased.dll msvcp140d.dll vcruntime140_1.dll VCRUNTIME140D.dll I downloaded these files and an error pops up Procedure entry point _realloc_dbg not found in library MSVCP140D.dll
Procedure entry point _callog1_dbg not found in library server.exe
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 12:10:09 PM |
|
Do you have it compiled for over 50 clients? After running for 5 minutes, nothing happens, then flies for 10 seconds and ends on the command line to close "Press any key to continue ...." OK ... however it works ... End .bat "pause" caused what I described above: - / IP of one of the machines appeared earlier with information that it sends incorrect data.
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 12:13:59 PM |
|
OKAY. I have something... ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.bitchain.pl%2F100btc%2Ferror3.png&t=665&c=1VHKywGR_dfriQ) I have disabled the client from this previous IP ... it's the same message about another machine Second try: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.bitchain.pl%2F100btc%2Ferror4.png&t=665&c=4-EWoLLIMUzuiw)
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
Jean_Luc (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 12:16:22 PM |
|
Ok thanks no it is not compiled for more than 50 clients i redo it
|
|
|
|
Jean_Luc (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 12:16:59 PM |
|
Do not kill clients
|
|
|
|
zielar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 12:19:06 PM |
|
OKAY... I kill only one to test
|
If you want - you can send me a donation to my BTC wallet address 31hgbukdkehcuxcedchkdbsrygegyefbvd
|
|
|
Jean_Luc (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2020, 12:32:24 PM |
|
I uploaded a new dbg exe
|
|
|
|
|