Blade configuration (port)

[n00b89]

Hello,

A friend of me give me a blade, but im not use to this, so when i am trying to configure it, but it doesnt work

my .bat :
cd C:\Program Files (x86)\Proxy
mining_proxy.exe -o stratum.coinex.pw -p 9040


my computer ip: 192.168.1.12


my blade config http://img11.hostingpics.net/pics/631776configblade.png


what should i change, I really dont know which port i have to put ? sorry for my bad english and the picture size,

[hamburger]

You can give this a try to see if you get your blade going;

IP: 192.168.1.100
Mask: 255.255.255.0
Gateway: 192.168.1.1
WEB Port: 8000
Primary DNS: 192.168.1.1
Secondary DNS: 211.148.192.141
Ports: 9337,9337
Server addresses: gbt.mining.eligius.st,gbt.mining.eligius.st
user:pass: <you_bitcoin_address_go_here>:none,<you_bitcoin_address_go_here>:none

If you just want to check and do not mind giving a few shares away during this test then use my address below.

14JTF6b5hZBbsPymijbyDZdhoRJzo2So7w

Use these settings only to test and then take it from here to whatever pool you want and to add a stratum proxy server.

H.

[n00b89]

from where you get the port ? (thanks for answer)

[hamburger]

from where you get the port ? (thanks for answer)

The short answer - Search and read!

I found some good stuff here;

https://bitcointalk.org/index.php?topic=205369.0
https://bitcointalk.org/?topic=286486.0

and then work from all the info on the sites.

Just check your pool aswell - coinex.pw seems to be down.